Hi guy's, I have some problem with my new Gigabyte U8000-RH hybrid DVB-T and Analogue USB device. My idea is to use this dvb-t tuner together with my Raspberry Pi, XBMC and tvheadend. But now I try to use tuner in my notebook with Fedora 17 and kernel 3.6.10-2.fc17.x86_64 The device I thing is running correctly using the following instruction: 1)http://www.linuxtv.org/wiki/index.php/Gigabyte_U8000-RH 2)http://www.linuxtv.org/wiki/index.php/Xceive_XC3028/XC2028 I had firmware for DiBcom 7000PC DVB-T demodulator (dvb-usb-dib0700-1.20.fw) and only build the firmware for the XCeive xc2028/xc3028 tuner (xc3028-v27.fw): # In order to use, you need to: # 1) Download the windows driver with something like: # wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip # ( find here: http://cdn.pinnaclesys.com/SupportFiles/PCTV%20Drivers/ReadmePCTV.htm ) # 2) Extract the file hcw85bda.sys from the zip into the current dir: # unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.sys # 3) Download the extract script # wget http://linuxtv.org/hg/v4l-dvb/raw-file/3919b17dc88e/linux/Documentation/video4linux/extract_xc3028.pl # 3) run the script: # perl extract_xc3028.pl # 4) copy the generated file: # sudo cp xc3028-v27.fw /lib/firmware After that plug the device and result is this: # lsusb Bus 002 Device 004: ID 1044:7002 Chu Yuen Enterprise Co., Ltd Gigabyte U8000 DVB-T tuner # dmesg [19378.803038] usb 2-2: new high-speed USB device number 5 using ehci_hcd [19378.917940] usb 2-2: New USB device found, idVendor=1044, idProduct=7002 [19378.917947] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [19378.917952] usb 2-2: Product: U8000 [19378.917957] usb 2-2: Manufacturer: GIGABYTE [19378.917961] usb 2-2: SerialNumber: 000GA1000100065 [19378.918688] dvb-usb: found a 'Gigabyte U8000-RH' in cold state, will try to load a firmware [19408.947281] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [19409.149523] dib0700: firmware started successfully. [19409.650179] dvb-usb: found a 'Gigabyte U8000-RH' in warm state. [19409.650284] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [19409.650421] DVB: registering new adapter (Gigabyte U8000-RH) [19409.870156] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)... [19409.870328] xc2028 7-0061: creating new instance [19409.870333] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner [19409.870343] dvb-usb: Gigabyte U8000-RH successfully initialized and connected. [19409.871587] xc2028 7-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 # ls -l /dev/dvb/adapter0/ total 0 crw-rw----+ 1 root video 212, 0 Dec 29 16:25 demux0 crw-rw----+ 1 root video 212, 1 Dec 29 16:25 dvr0 crw-rw----+ 1 root video 212, 3 Dec 29 16:25 frontend0 crw-rw----+ 1 root video 212, 2 Dec 29 16:25 net0 OK...and now when I try to watch tv with kaffeine for example, I see this error in the dmesg: [19865.904923] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19865.904923] [19865.904931] xc2028 7-0061: Loading firmware for type=D2620 DTV8 (208), id 0000000000000000. [19865.909805] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19865.909805] [19865.914677] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19865.914677] [19865.918803] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19865.918803] [19865.926801] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19865.926801] [19865.934799] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19865.934799] [19865.943177] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19865.943177] [19865.947298] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19865.947298] [19865.951428] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19865.951428] [19865.959425] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19865.959425] [19865.963550] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19865.963550] [19865.969551] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19865.969551] [19865.973675] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19865.973675] [19865.981675] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19865.981675] [19865.985800] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19865.985800] [19865.989925] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19865.989925] [19865.996802] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19865.996802] [19866.000923] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19866.000923] [19866.005054] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19866.005054] [19866.009174] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19866.009174] [19866.014051] dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 [19866.014051] [19866.014057] xc2028 7-0061: Loading SCODE for type=DTV7 DTV78 DTV8 DIBCOM52 CHINA SCODE HAS_IF_5400 (65000380), id 0000000000000000. I find some solutions about this error's: echo option dvb-usb disable_rc_polling=1 >> /etc/modprobe.d/options.conf but I dont know, the device not work correctly again. When I run to watch tv again from kaffeine, first 5 or 10 seconds the pictures is excellent, and after that the channels is with bad quality. When i search channel, some time get all channel, some time part of them. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
