Hello,
I'm trying to add support for card AVerMedia Hybrid TV / Radio (A16D)
two new revisions. subsystem: 1461:fb36, subsystem: 1461:fc36.
The card capable of DVB-T, analog TV and FM radio.
--- drivers/media/pci/saa7134/saa7134-cards.c.orig 2012-12-17
22:14:54.000000000 +0300
+++ drivers/media/pci/saa7134/saa7134-cards.c 2012-12-20
04:01:51.673631779 +0300
@@ -6858,6 +6858,18 @@
.subdevice = 0xf936,
.driver_data = SAA7134_BOARD_AVERMEDIA_A16D,
}, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1461, /* Avermedia Technologies Inc */
+ .subdevice = 0xfb36, /*A16D-ZL10353*/
+ .driver_data = SAA7134_BOARD_AVERMEDIA_A16D,
+ }, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1461, /* Avermedia Technologies Inc */
+ .subdevice = 0xfc36, /*A16D-ANALOG*/
+ .driver_data = SAA7134_BOARD_AVERMEDIA_A16D,
+ }, {
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x1461, /* Avermedia Technologies Inc */
The result is:
[ 22.893960] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[ 22.894167] saa7133[0]: found at 0000:05:02.0, rev: 209, irq: 18,
latency: 64, mmio: 0xfebff800
[ 22.894322] saa7133[0]: subsystem: 1461:fb36, board: AVerMedia Hybrid
TV/Radio (A16D) [card=137,autodetected]
[ 22.894502] saa7133[0]: board init: gpio is 200000
[ 23.068033] saa7133[0]: i2c eeprom 00: 61 14 36 fb 00 00 00 00 00 00
00 00 00 00 00 00
[ 23.068960] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff
ff ff ff ff ff ff
[ 23.069876] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 00 08 ff
00 10 ff ff ff ff
[ 23.070795] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.071709] saa7133[0]: i2c eeprom 40: ff 6a 00 ff c2 1e ff ff ff ff
ff ff ff ff ff ff
[ 23.072643] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.073558] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.074470] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.075384] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.076314] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.077233] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.078144] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.079030] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.079915] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.080820] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.081708] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 23.660110] tuner 1-0061: Tuner -1 found with type(s) Radio TV.
[ 23.887953] xc2028 1-0061: creating new instance
[ 23.888099] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[ 23.889581] saa7133[0]: registered device video0 [v4l2]
[ 23.889961] saa7133[0]: registered device vbi0
[ 23.922834] saa7133[0]: registered device radio0
[ 23.928898] xc2028 1-0061: Loading 80 firmware images from
xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 23.975442] dvb_init() allocating 1 frontend
[ 24.023475] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3),
id 0000000000000000.
[ 24.551822] saa7134 ALSA driver for DMA sound loaded
[ 24.551987] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 18
registered as card -1
[ 33.092040] (0), id 00000000000000ff:
[ 33.092112] xc2028 1-0061: Loading firmware for type=(0), id
0000000100000007.
[ 33.260020] xc2028 1-0061: Loading SCODE for type=MONO SCODE
HAS_IF_5320 (60008000), id 0000000f00000007.
[ 33.382173] ppdev: user-space parallel port driver
[ 33.460032] xc2028 1-0061: Loading firmware for type=BASE FM (401),
id 0000000000000000.
[ 41.824143] xc2028 1-0061: Loading firmware for type=FM (400), id
0000000000000000.
[ 42.144085] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3),
id 0000000000000000.
[ 50.728030] (0), id 00000000000000ff:
[ 50.728133] xc2028 1-0061: Loading firmware for type=(0), id
0000000100000007.
[ 50.896027] xc2028 1-0061: Loading SCODE for type=MONO SCODE
HAS_IF_5320 (60008000), id 0000000f00000007.
[ 51.088666] xc2028 1-0061: Error on line 1293: -5
[ 51.093507] xc2028 1-0061: Error on line 1293: -5
With this patch board starts and takes the analog signal. To receive a
DVB-T, add the support demodulator zl10353 вместо Zarlink MT352
Any ideas?
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
