This patch adds the dma burst size config support for marvell-ccic.
Developer can set the dma burst size in specified board driver.
Signed-off-by: Albert Wang <twang13@xxxxxxxxxxx>
Signed-off-by: Libin Yang <lbyang@xxxxxxxxxxx>
---
.../media/platform/marvell-ccic/mcam-core-soc.c | 2 +-
drivers/media/platform/marvell-ccic/mcam-core.h | 7 ++++---
drivers/media/platform/marvell-ccic/mmp-driver.c | 11 +++++++++++
include/media/mmp-camera.h | 1 +
4 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/media/platform/marvell-ccic/mcam-core-soc.c b/drivers/media/platform/marvell-ccic/mcam-core-soc.c
index 9016dc6..5b1dcfe 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core-soc.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core-soc.c
@@ -83,7 +83,7 @@ static int mcam_camera_add_device(struct soc_camera_device *icd)
mcam_ctlr_stop(mcam);
mcam_set_config_needed(mcam, 1);
mcam_reg_write(mcam, REG_CTRL1,
- C1_RESERVED | C1_DMAPOSTED);
+ mcam->burst | C1_RESERVED | C1_DMAPOSTED);
mcam_reg_write(mcam, REG_CLKCTRL,
(mcam->mclk_src << 29) | mcam->mclk_div);
cam_dbg(mcam, "camera: set sensor mclk = %dMHz\n", mcam->mclk_min);
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h
index 57442e0..e1025f2 100755
--- a/drivers/media/platform/marvell-ccic/mcam-core.h
+++ b/drivers/media/platform/marvell-ccic/mcam-core.h
@@ -126,6 +126,7 @@ struct mcam_camera {
short int use_smbus; /* SMBUS or straight I2c? */
enum mcam_buffer_mode buffer_mode;
+ int burst;
int mclk_min;
int mclk_src;
int mclk_div;
@@ -411,9 +412,9 @@ int mcam_soc_camera_host_register(struct mcam_camera *mcam);
#define C1_DESC_3WORD 0x00000200 /* Three-word descriptors used */
#define C1_444ALPHA 0x00f00000 /* Alpha field in RGB444 */
#define C1_ALPHA_SHFT 20
-#define C1_DMAB32 0x00000000 /* 32-byte DMA burst */
-#define C1_DMAB16 0x02000000 /* 16-byte DMA burst */
-#define C1_DMAB64 0x04000000 /* 64-byte DMA burst */
+#define C1_DMAB64 0x00000000 /* 64-byte DMA burst */
+#define C1_DMAB128 0x02000000 /* 128-byte DMA burst */
+#define C1_DMAB256 0x04000000 /* 256-byte DMA burst */
#define C1_DMAB_MASK 0x06000000
#define C1_TWOBUFS 0x08000000 /* Use only two DMA buffers */
#define C1_PWRDWN 0x10000000 /* Power down */
diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index cd850f4..3469f02 100755
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -400,6 +400,17 @@ static int mmpcam_probe(struct platform_device *pdev)
mcam->dphy = pdata->dphy;
mcam->mipi_enabled = 0;
mcam->lane = pdata->lane;
+ switch (pdata->dma_burst) {
+ case 128:
+ mcam->burst = C1_DMAB128;
+ break;
+ case 256:
+ mcam->burst = C1_DMAB256;
+ break;
+ default:
+ mcam->burst = C1_DMAB64;
+ break;
+ }
INIT_LIST_HEAD(&mcam->buffers);
/*
diff --git a/include/media/mmp-camera.h b/include/media/mmp-camera.h
index ec4f21f..4da0df7 100755
--- a/include/media/mmp-camera.h
+++ b/include/media/mmp-camera.h
@@ -13,6 +13,7 @@ struct mmp_camera_platform_data {
int mclk_src;
int mclk_div;
int chip_id;
+ int dma_burst;
/*
* MIPI support
*/
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
