Hi All,
i am trying to get this DVBT usb device to work on my Linux Mint Debian
System. I configured my kernel 3.6.2, but i am not sure whether
something is missing.
When i plug in this device i get the following <dmesg>:
[58564.761059] usb 1-1.1: new high-speed USB device number 8 using ehci_hcd
[58564.845858] usb 1-1.1: New USB device found, idVendor=0b05,
idProduct=171f
[58564.845863] usb 1-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[58564.845867] usb 1-1.1: Product: STK7700
[58564.845870] usb 1-1.1: Manufacturer: DIBCOM
[58564.845874] usb 1-1.1: SerialNumber: 6803800468
[58565.243046] dvb-usb: found a 'ASUS My Cinema U3000 Mini DVBT Tuner'
in cold state, will try to load a firmware
[58565.359590] dvb-usb: downloading firmware from file
'dvb-usb-dib0700-1.20.fw'
[58565.560519] dib0700: firmware started successfully.
[58566.061319] dvb-usb: found a 'ASUS My Cinema U3000 Mini DVBT Tuner'
in warm state.
[58566.061375] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[58566.061506] DVB: registering new adapter (ASUS My Cinema U3000 Mini
DVBT Tuner)
[58566.105071] dib0700: stk7700P2_frontend_attach:
dib7000p_i2c_enumeration failed. Cannot continue
[58566.105071]
[58566.105078] dvb-usb: no frontend was attached by 'ASUS My Cinema
U3000 Mini DVBT Tuner'
[58566.167327] Registered IR keymap rc-dib0700-rc5
[58566.167539] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/rc/rc0/input18
[58566.167625] rc0: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/rc/rc0
[58566.167889] dvb-usb: schedule remote query interval to 50 msecs.
[58566.167894] dvb-usb: ASUS My Cinema U3000 Mini DVBT Tuner
successfully initialized and connected.
[58566.168136] usbcore: registered new interface driver dvb_usb_dib0700
[58612.073124] usb 1-1.1: USB disconnect, device number 8
[58612.112148] dvb-usb: ASUS My Cinema U3000 Mini DVBT Tuner
successfully deinitialized and disconnected.
[58621.960328] usb 1-1.1: new high-speed USB device number 9 using ehci_hcd
[58622.044735] usb 1-1.1: New USB device found, idVendor=0b05,
idProduct=171f
[58622.044741] usb 1-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[58622.044745] usb 1-1.1: Product: STK7700
[58622.044748] usb 1-1.1: Manufacturer: DIBCOM
[58622.044751] usb 1-1.1: SerialNumber: 6803800468
[58622.045479] dvb-usb: found a 'ASUS My Cinema U3000 Mini DVBT Tuner'
in cold state, will try to load a firmware
[58622.049845] dvb-usb: downloading firmware from file
'dvb-usb-dib0700-1.20.fw'
[58622.251193] dib0700: firmware started successfully.
[58622.751730] dvb-usb: found a 'ASUS My Cinema U3000 Mini DVBT Tuner'
in warm state.
[58622.751790] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[58622.751958] DVB: registering new adapter (ASUS My Cinema U3000 Mini
DVBT Tuner)
[58622.795727] dib0700: stk7700P2_frontend_attach:
dib7000p_i2c_enumeration failed. Cannot continue
[58622.795727]
[58622.795733] dvb-usb: no frontend was attached by 'ASUS My Cinema
U3000 Mini DVBT Tuner'
[58622.795742] Registered IR keymap rc-dib0700-rc5
[58622.795922] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/rc/rc1/input19
[58622.796059] rc1: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/rc/rc1
[58622.796364] dvb-usb: schedule remote query interval to 50 msecs.
[58622.796369] dvb-usb: ASUS My Cinema U3000 Mini DVBT Tuner
successfully initialized and connected.
It seems that i have no frontend? Am i right? Do you have some advice
for me?
regards Markus
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
