On Fri, 23 Nov 2012, Albert Wang wrote: > This patch adds the dma burst size config support for marvell-ccic. > Developer can set the dma burst size in specified board driver. > > Signed-off-by: Libin Yang <lbyang@xxxxxxxxxxx> > Signed-off-by: Albert Wang <twang13@xxxxxxxxxxx> > --- > .../media/platform/marvell-ccic/mcam-core-soc.c | 2 +- > drivers/media/platform/marvell-ccic/mcam-core.h | 7 ++++--- > drivers/media/platform/marvell-ccic/mmp-driver.c | 11 +++++++++++ > include/media/mmp-camera.h | 1 + > 4 files changed, 17 insertions(+), 4 deletions(-) > > diff --git a/drivers/media/platform/marvell-ccic/mcam-core-soc.c b/drivers/media/platform/marvell-ccic/mcam-core-soc.c > index a0df8b4..518e6dc 100644 > --- a/drivers/media/platform/marvell-ccic/mcam-core-soc.c > +++ b/drivers/media/platform/marvell-ccic/mcam-core-soc.c > @@ -100,7 +100,7 @@ static int mcam_camera_add_device(struct soc_camera_device *icd) > mcam_ctlr_stop(mcam); > mcam_set_config_needed(mcam, 1); > mcam_reg_write(mcam, REG_CTRL1, > - C1_RESERVED | C1_DMAPOSTED); > + mcam->burst | C1_RESERVED | C1_DMAPOSTED); > mcam_reg_write(mcam, REG_CLKCTRL, > (mcam->mclk_src << 29) | mcam->mclk_div); > cam_dbg(mcam, "camera: set sensor mclk = %dMHz\n", mcam->mclk_min); > diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h > index e149aa3..999b581 100755 > --- a/drivers/media/platform/marvell-ccic/mcam-core.h > +++ b/drivers/media/platform/marvell-ccic/mcam-core.h > @@ -132,6 +132,7 @@ struct mcam_camera { > short int use_smbus; /* SMBUS or straight I2c? */ > enum mcam_buffer_mode buffer_mode; > > + int burst; > int mclk_min; > int mclk_src; > int mclk_div; > @@ -419,9 +420,9 @@ int mcam_soc_camera_host_register(struct mcam_camera *mcam); > #define C1_DESC_3WORD 0x00000200 /* Three-word descriptors used */ > #define C1_444ALPHA 0x00f00000 /* Alpha field in RGB444 */ > #define C1_ALPHA_SHFT 20 > -#define C1_DMAB32 0x00000000 /* 32-byte DMA burst */ > -#define C1_DMAB16 0x02000000 /* 16-byte DMA burst */ > -#define C1_DMAB64 0x04000000 /* 64-byte DMA burst */ > +#define C1_DMAB64 0x00000000 /* 64-byte DMA burst */ > +#define C1_DMAB128 0x02000000 /* 128-byte DMA burst */ > +#define C1_DMAB256 0x04000000 /* 256-byte DMA burst */ Was this a bug in the driver or is it a different IP version? Thanks Guennadi > #define C1_DMAB_MASK 0x06000000 > #define C1_TWOBUFS 0x08000000 /* Use only two DMA buffers */ > #define C1_PWRDWN 0x10000000 /* Power down */ > diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c > index bea7224..e840941 100755 > --- a/drivers/media/platform/marvell-ccic/mmp-driver.c > +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c > @@ -365,6 +365,17 @@ static int mmpcam_probe(struct platform_device *pdev) > mcam->dphy = &(pdata->dphy); > mcam->mipi_enabled = 0; > mcam->lane = pdata->lane; > + switch (pdata->dma_burst) { > + case 128: > + mcam->burst = C1_DMAB128; > + break; > + case 256: > + mcam->burst = C1_DMAB256; > + break; > + default: > + mcam->burst = C1_DMAB64; > + break; > + } > INIT_LIST_HEAD(&mcam->buffers); > > /* > diff --git a/include/media/mmp-camera.h b/include/media/mmp-camera.h > index 731f81f..7a5e63c 100755 > --- a/include/media/mmp-camera.h > +++ b/include/media/mmp-camera.h > @@ -11,6 +11,7 @@ struct mmp_camera_platform_data { > int mclk_src; > int mclk_div; > int chip_id; > + int dma_burst; > /* > * MIPI support > */ > -- > 1.7.9.5 > --- Guennadi Liakhovetski, Ph.D. Freelance Open-Source Software Developer http://www.open-technology.de/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html