Em Fri, 23 Nov 2012 18:01:14 +0100 Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx> escreveu: > Hi, > > I've got a Hauppauge HVR-900 (65008/A1C0) today. First, the device > showed up as USB device 7640:edc1 (even after several unplug - replug > cycles), so I decided to add this VID:PID to the em28xx driver to see > what happens. > That worked fine, em2882/em2883, tuner xc2028/3028 etc. were detected > properly. > Later I noticed, that the device now shows up as 2040:6500, which is the > expected ID for this device. > Since then, the device maintains this ID. I also checked if Windows is > involved, but it shows up with the same ID there. This is a known hardware bug on some HVR devices. I have this problem with one based on tm6000: sometimes, it is not able to read from the EEPROM. When this happens, it gets the manufacturer's default USB ID. You may force it to use the right em28xx entry using "card=" modprobe parameter. -- Regards, Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
