Re: [PATCH v9 3/6] fbmon: add videomode helpers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 14, 2012 at 12:43:20PM +0100, Steffen Trumtrar wrote:
> Add a function to convert from the generic videomode to a fb_videomode.
> 
> Signed-off-by: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
> ---
>  drivers/video/fbmon.c |   38 ++++++++++++++++++++++++++++++++++++++
>  include/linux/fb.h    |    5 +++++
>  2 files changed, 43 insertions(+)
> 
> diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
> index cef6557..cccef17 100644
> --- a/drivers/video/fbmon.c
> +++ b/drivers/video/fbmon.c
> @@ -31,6 +31,7 @@
>  #include <linux/pci.h>
>  #include <linux/slab.h>
>  #include <video/edid.h>
> +#include <linux/videomode.h>
>  #ifdef CONFIG_PPC_OF
>  #include <asm/prom.h>
>  #include <asm/pci-bridge.h>
> @@ -1373,6 +1374,43 @@ int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, struct fb_inf
>  	kfree(timings);
>  	return err;
>  }
> +
> +#if IS_ENABLED(CONFIG_VIDEOMODE)
> +int fb_videomode_from_videomode(struct videomode *vm, struct fb_videomode *fbmode)
> +{
> +	fbmode->xres = vm->hactive;
> +	fbmode->left_margin = vm->hback_porch;
> +	fbmode->right_margin = vm->hfront_porch;
> +	fbmode->hsync_len = vm->hsync_len;
> +
> +	fbmode->yres = vm->vactive;
> +	fbmode->upper_margin = vm->vback_porch;
> +	fbmode->lower_margin = vm->vfront_porch;
> +	fbmode->vsync_len = vm->vsync_len;
> +
> +	fbmode->pixclock = KHZ2PICOS(vm->pixelclock / 1000);
> +
> +	fbmode->sync = 0;
> +	fbmode->vmode = 0;
> +	if (vm->hah)
> +		fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
> +	if (vm->vah)
> +		fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
> +	if (vm->interlaced)
> +		fbmode->vmode |= FB_VMODE_INTERLACED;
> +	if (vm->doublescan)
> +		fbmode->vmode |= FB_VMODE_DOUBLE;
> +	if (vm->de)
> +		fbmode->sync |= FB_SYNC_DATA_ENABLE_HIGH_ACT;
> +	fbmode->refresh = (vm->pixelclock*1000) / (vm->hactive * vm->vactive);

CodingStyle that you should have spaces around '*'. Also I'm not sure if
that formula is correct. Shouldn't the blanking intervals be counted as
well? So:

	unsigned int htotal = vm->hactive + vm->hfront_porch +
			      vm->hback_porch + vm->hsync_len;
	unsigned int vtotal = vm->vactive + vm->vfront_porch +
			      vm->vback_porch + vm->vsync_len;

	fbmode->refresh = (vm->pixelclock * 1000) / (htotal * vtotal);

?

> +	fbmode->flag = 0;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(fb_videomode_from_videomode);
> +#endif
> +
> +

Gratuitous blank line.

>  #else
>  int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var)
>  {
> diff --git a/include/linux/fb.h b/include/linux/fb.h
> index c7a9571..6a3a675 100644
> --- a/include/linux/fb.h
> +++ b/include/linux/fb.h
> @@ -14,6 +14,7 @@
>  #include <linux/backlight.h>
>  #include <linux/slab.h>
>  #include <asm/io.h>
> +#include <linux/videomode.h>
>  
>  struct vm_area_struct;
>  struct fb_info;
> @@ -714,6 +715,10 @@ extern void fb_destroy_modedb(struct fb_videomode *modedb);
>  extern int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb);
>  extern unsigned char *fb_ddc_read(struct i2c_adapter *adapter);
>  
> +#if IS_ENABLED(CONFIG_VIDEOMODE)
> +extern int fb_videomode_from_videomode(struct videomode *vm,
> +				       struct fb_videomode *fbmode);
> +#endif
>  /* drivers/video/modedb.c */

These in turn could use an extra blank line.

Thierry

Attachment: pgp8qlms_7Xho.pgp
Description: PGP signature


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux