add support card
Signed-off-by: Alfredo J. Delaiti <alfredodelaiti@xxxxxxxxxxxx>
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
index 6277e14..91eddc2 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -1366,30 +1366,31 @@ int cx23885_ir_init(struct cx23885_dev *dev)
ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg);
/*
* For these boards we need to invert the Tx output via the
* IR controller to have the LED off while idle
*/
v4l2_subdev_call(dev->sd_ir, ir, tx_g_parameters, ¶ms);
params.enable = false;
params.shutdown = false;
params.invert_level = true;
v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, ¶ms);
params.shutdown = true;
v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, ¶ms);
break;
case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
case CX23885_BOARD_TEVII_S470:
+ case CX23885_BOARD_MYGICA_X8507:
if (!enable_885_ir)
break;
dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
if (dev->sd_ir == NULL) {
ret = -ENODEV;
break;
}
v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
ir_rx_pin_cfg_count, ir_rx_pin_cfg);
break;
case CX23885_BOARD_HAUPPAUGE_HVR1250:
if (!enable_885_ir)
break;
dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
if (dev->sd_ir == NULL) {
@@ -1408,30 +1409,31 @@ int cx23885_ir_init(struct cx23885_dev *dev)
}
void cx23885_ir_fini(struct cx23885_dev *dev)
{
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
cx23885_irq_remove(dev, PCI_MSK_IR);
cx23888_ir_remove(dev);
dev->sd_ir = NULL;
break;
case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ case CX23885_BOARD_MYGICA_X8507:
cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
/* sd_ir is a duplicate pointer to the AV Core, just clear it */
dev->sd_ir = NULL;
break;
}
}
static int netup_jtag_io(void *device, int tms, int tdi, int read_tdo)
{
int data;
int tdo = 0;
struct cx23885_dev *dev = (struct cx23885_dev *)device;
/*TMS*/
data = ((cx_read(GP0_IO)) & (~0x00000002));
data |= (tms ? 0x00020002 : 0x00020000);
@@ -1452,30 +1454,31 @@ static int netup_jtag_io(void *device, int tms, int tdi, int read_tdo)
return tdo;
}
void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
{
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
if (dev->sd_ir)
cx23885_irq_add_enable(dev, PCI_MSK_IR);
break;
case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ case CX23885_BOARD_MYGICA_X8507:
if (dev->sd_ir)
cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
break;
}
}
void cx23885_card_setup(struct cx23885_dev *dev)
{
struct cx23885_tsport *ts1 = &dev->ts1;
struct cx23885_tsport *ts2 = &dev->ts2;
static u8 eeprom[256];
if (dev->i2c_bus[0].i2c_rc == 0) {
dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c
index 4f1055a..7875dfb 100644
--- a/drivers/media/pci/cx23885/cx23885-input.c
+++ b/drivers/media/pci/cx23885/cx23885-input.c
@@ -77,30 +77,31 @@ static void cx23885_input_process_measurements(struct cx23885_dev *dev,
void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
{
struct v4l2_subdev_ir_parameters params;
int overrun, data_available;
if (dev->sd_ir == NULL || events == 0)
return;
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ case CX23885_BOARD_MYGICA_X8507:
/*
* The only boards we handle right now. However other boards
* using the CX2388x integrated IR controller should be similar
*/
break;
default:
return;
}
overrun = events & (V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN |
V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN);
data_available = events & (V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED |
V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ);
@@ -128,30 +129,31 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
static int cx23885_input_ir_start(struct cx23885_dev *dev)
{
struct v4l2_subdev_ir_parameters params;
if (dev->sd_ir == NULL)
return -ENODEV;
atomic_set(&dev->ir_input_stopping, 0);
v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms);
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ case CX23885_BOARD_MYGICA_X8507:
/*
* The IR controller on this board only returns pulse widths.
* Any other mode setting will fail to set up the device.
*/
params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
params.enable = true;
params.interrupt_enable = true;
params.shutdown = false;
/* Setup for baseband compatible with both RC-5 and RC-6A */
params.modulation = false;
/* RC-5: 2,222,222 ns = 1/36 kHz * 32 cycles * 2 marks * 1.25*/
/* RC-6A: 3,333,333 ns = 1/36 kHz * 16 cycles * 6 marks * 1.25*/
params.max_pulse_width = 3333333; /* ns */
/* RC-5: 666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */
@@ -277,30 +279,37 @@ int cx23885_input_init(struct cx23885_dev *dev)
break;
case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
/* Integrated CX23885 IR controller */
driver_type = RC_DRIVER_IR_RAW;
allowed_protos = RC_BIT_NEC;
/* The grey Terratec remote with orange buttons */
rc_map = RC_MAP_NEC_TERRATEC_CINERGY_XS;
break;
case CX23885_BOARD_TEVII_S470:
/* Integrated CX23885 IR controller */
driver_type = RC_DRIVER_IR_RAW;
allowed_protos = RC_BIT_ALL;
/* A guess at the remote */
rc_map = RC_MAP_TEVII_NEC;
break;
+ case CX23885_BOARD_MYGICA_X8507:
+ /* Integrated CX23885 IR controller */
+ driver_type = RC_DRIVER_IR_RAW;
+ allowed_protos = RC_BIT_ALL;
+ /* A guess at the remote */
+ rc_map = RC_MAP_TOTAL_MEDIA_IN_HAND_02;
+ break;
default:
return -ENODEV;
}
/* cx23885 board instance kernel IR state */
kernel_ir = kzalloc(sizeof(struct cx23885_kernel_ir), GFP_KERNEL);
if (kernel_ir == NULL)
return -ENOMEM;
kernel_ir->cx = dev;
kernel_ir->name = kasprintf(GFP_KERNEL, "cx23885 IR (%s)",
cx23885_boards[dev->board].name);
kernel_ir->phys = kasprintf(GFP_KERNEL, "pci-%s/ir0",
pci_name(dev->pci));
--
Dona tu voz
http://www.voxforge.org/es
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
