Since mx27 transitioned to the commmon clock framework in 3.5, the correct way
to acquire the csi clock is to get csi_ahb and csi_per clocks separately.
By not doing so the camera sensor does not probe correctly:
soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0
mx2-camera mx2-camera.0: Camera driver attached to camera 0
ov2640 0-0030: Product ID error fb:fb
mx2-camera mx2-camera.0: Camera driver detached from camera 0
mx2-camera mx2-camera.0: MX2 Camera (CSI) driver probed, clock frequency: 66500000
Adapt the mx2_camera driver to the new clock framework and make it functional
again.
Tested-by: Gaëtan Carlier <gcembed@xxxxxxxxx>
Tested-by: Javier Martin <javier.martin@xxxxxxxxxxxxxxxxx>
Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
---
Changes since v3:
- Drop unneeded clk_unprepare calls as pointed out by Guennadi
Changes since v2:
- Fix clock error handling code as pointed out by Russell King
Changes since v1:
- Rebased against linux-next 20121008.
drivers/media/platform/soc_camera/mx2_camera.c | 39 ++++++++++++++++++------
1 file changed, 29 insertions(+), 10 deletions(-)
diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c
index e575ae8..558f6a3 100644
--- a/drivers/media/platform/soc_camera/mx2_camera.c
+++ b/drivers/media/platform/soc_camera/mx2_camera.c
@@ -278,7 +278,8 @@ struct mx2_camera_dev {
struct device *dev;
struct soc_camera_host soc_host;
struct soc_camera_device *icd;
- struct clk *clk_csi, *clk_emma_ahb, *clk_emma_ipg;
+ struct clk *clk_emma_ahb, *clk_emma_ipg;
+ struct clk *clk_csi_ahb, *clk_csi_per;
void __iomem *base_csi, *base_emma;
@@ -464,7 +465,8 @@ static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev)
{
unsigned long flags;
- clk_disable_unprepare(pcdev->clk_csi);
+ clk_disable_unprepare(pcdev->clk_csi_ahb);
+ clk_disable_unprepare(pcdev->clk_csi_per);
writel(0, pcdev->base_csi + CSICR1);
if (is_imx27_camera(pcdev)) {
writel(0, pcdev->base_emma + PRP_CNTL);
@@ -492,10 +494,14 @@ static int mx2_camera_add_device(struct soc_camera_device *icd)
if (pcdev->icd)
return -EBUSY;
- ret = clk_prepare_enable(pcdev->clk_csi);
+ ret = clk_prepare_enable(pcdev->clk_csi_ahb);
if (ret < 0)
return ret;
+ ret = clk_prepare_enable(pcdev->clk_csi_per);
+ if (ret < 0)
+ goto exit_csi_ahb;
+
csicr1 = CSICR1_MCLKEN;
if (is_imx27_camera(pcdev))
@@ -512,6 +518,11 @@ static int mx2_camera_add_device(struct soc_camera_device *icd)
icd->devnum);
return 0;
+
+exit_csi_ahb:
+ clk_disable_unprepare(pcdev->clk_csi_ahb);
+
+ return ret;
}
static void mx2_camera_remove_device(struct soc_camera_device *icd)
@@ -1772,10 +1783,17 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev)
break;
}
- pcdev->clk_csi = devm_clk_get(&pdev->dev, "ahb");
- if (IS_ERR(pcdev->clk_csi)) {
- dev_err(&pdev->dev, "Could not get csi clock\n");
- err = PTR_ERR(pcdev->clk_csi);
+ pcdev->clk_csi_ahb = devm_clk_get(&pdev->dev, "ahb");
+ if (IS_ERR(pcdev->clk_csi_ahb)) {
+ dev_err(&pdev->dev, "Could not get csi ahb clock\n");
+ err = PTR_ERR(pcdev->clk_csi_ahb);
+ goto exit;
+ }
+
+ pcdev->clk_csi_per = devm_clk_get(&pdev->dev, "per");
+ if (IS_ERR(pcdev->clk_csi_per)) {
+ dev_err(&pdev->dev, "Could not get csi per clock\n");
+ err = PTR_ERR(pcdev->clk_csi_per);
goto exit;
}
@@ -1785,12 +1803,13 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev)
pcdev->platform_flags = pcdev->pdata->flags;
- rate = clk_round_rate(pcdev->clk_csi, pcdev->pdata->clk * 2);
+ rate = clk_round_rate(pcdev->clk_csi_per,
+ pcdev->pdata->clk * 2);
if (rate <= 0) {
err = -ENODEV;
goto exit;
}
- err = clk_set_rate(pcdev->clk_csi, rate);
+ err = clk_set_rate(pcdev->clk_csi_per, rate);
if (err < 0)
goto exit;
}
@@ -1848,7 +1867,7 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev)
goto exit_free_emma;
dev_info(&pdev->dev, "MX2 Camera (CSI) driver probed, clock frequency: %ld\n",
- clk_get_rate(pcdev->clk_csi));
+ clk_get_rate(pcdev->clk_csi_per));
return 0;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
