This patch series adds support for USB bulk transfers to the em28xx driver.
Patch 1 is a bugfix for the image data processing with non-interlaced devices (webcams)
that should be considered for stable (see commit message).
Patches 2-21 extend the driver to support USB bulk transfers.
USB endpoint mapping had to be extended and is a bit tricky.
It might still not be sufficient to handle ALL isoc/bulk endpoints of ALL existing devices,
but it should work with the devices we have seen so far and (most important !)
preserves backwards compatibility to the current driver behavior.
Isoc endpoints/transfers are preffered by default, patch 21 adds a module parameter to change this behavior.
The last two patches are follow-up patches not really related to USB tranfers.
Patch 22 reduces the code size in em28xx-video by merging the two URB data processing functions
and patch 23 enables VBI-support for em2840-devices.
Please note that I could test the changes with an analog non-interlaced non-VBI device only !
So further tests with DVB/interlaced/VBI devices are strongly recommended !
Frank Schäfer (23):
em28xx: fix wrong data offset for non-interlaced mode in
em28xx_copy_video
em28xx: clarify meaning of field 'progressive' in struct em28xx
em28xx: rename isoc packet number constants and parameters
em28xx: rename struct em28xx_usb_isoc_bufs to em28xx_usb_bufs
em28xx: rename struct em28xx_usb_isoc_ctl to em28xx_usb_ctl
em28xx: remove obsolete #define EM28XX_URB_TIMEOUT
em28xx: update description of em28xx_irq_callback
em28xx: rename function em28xx_uninit_isoc to em28xx_uninit_usb_xfer
em28xx: create a common function for isoc and bulk URB allocation and
setup
em28xx: create a common function for isoc and bulk USB transfer
initialization
em28xx: clear USB halt/stall condition in em28xx_init_usb_xfer when
using bulk transfers
em28xx: remove double checks for urb->status == -ENOENT in
urb_data_copy functions
em28xx: rename function em28xx_isoc_copy and extend for USB bulk
transfers
em28xx: rename function em28xx_isoc_copy_vbi and extend for USB bulk
transfers
em28xx: rename function em28xx_dvb_isoc_copy and extend for USB bulk
transfers
em28xx: rename usb debugging module parameter and macro
em28xx: rename some USB parameter fields in struct em28xx to clarify
their role
em28xx: add fields for analog and DVB USB transfer type selection to
struct em28xx
em28xx: set USB alternate settings for analog video bulk transfers
properly
em28xx: improve USB endpoint logic, also use bulk transfers
em28xx: add module parameter for selection of the preferred USB
transfer type
em28xx: use common urb data copying function for vbi and non-vbi
devices
em28xx: enable VBI-support for em2840 devices
drivers/media/usb/em28xx/em28xx-cards.c | 114 +++++++++---
drivers/media/usb/em28xx/em28xx-core.c | 250 ++++++++++++++++-----------
drivers/media/usb/em28xx/em28xx-dvb.c | 85 ++++++---
drivers/media/usb/em28xx/em28xx-reg.h | 4 +-
drivers/media/usb/em28xx/em28xx-vbi.c | 4 +-
drivers/media/usb/em28xx/em28xx-video.c | 288 +++++++++++--------------------
drivers/media/usb/em28xx/em28xx.h | 78 +++++----
7 Dateien geändert, 452 Zeilen hinzugefügt(+), 371 Zeilen entfernt(-)
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
