On 9 October 2012 14:48, Gaëtan Carlier <gcembed@xxxxxxxxx> wrote:
> Hi,
>
> On 10/09/2012 12:37 AM, Fabio Estevam wrote:
>>
>> From: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
>>
>> Since mx27 transitioned to the commmon clock framework in 3.5, the correct
>> way
>> to acquire the csi clock is to get csi_ahb and csi_per clocks separately.
>>
>> By not doing so the camera sensor does not probe correctly:
>>
>> soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0
>> mx2-camera mx2-camera.0: Camera driver attached to camera 0
>> ov2640 0-0030: Product ID error fb:fb
>> mx2-camera mx2-camera.0: Camera driver detached from camera 0
>> mx2-camera mx2-camera.0: MX2 Camera (CSI) driver probed, clock frequency:
>> 66500000
>>
>> Adapt the mx2_camera driver to the new clock framework and make it
>> functional
>> again.
>>
>> Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
>> ---
>> Changes since v1:
>> - Rebased against linux-next 20121008.
>>
>> drivers/media/platform/soc_camera/mx2_camera.c | 47
>> +++++++++++++++++-------
>> 1 file changed, 34 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/media/platform/soc_camera/mx2_camera.c
>> b/drivers/media/platform/soc_camera/mx2_camera.c
>> index 403d7f1..9f8c5f0 100644
>> --- a/drivers/media/platform/soc_camera/mx2_camera.c
>> +++ b/drivers/media/platform/soc_camera/mx2_camera.c
>> @@ -272,7 +272,8 @@ struct mx2_camera_dev {
>> struct device *dev;
>> struct soc_camera_host soc_host;
>> struct soc_camera_device *icd;
>> - struct clk *clk_csi, *clk_emma_ahb, *clk_emma_ipg;
>> + struct clk *clk_emma_ahb, *clk_emma_ipg;
>> + struct clk *clk_csi_ahb, *clk_csi_per;
>>
>> void __iomem *base_csi, *base_emma;
>>
>> @@ -432,7 +433,8 @@ static void mx2_camera_deactivate(struct
>> mx2_camera_dev *pcdev)
>> {
>> unsigned long flags;
>>
>> - clk_disable_unprepare(pcdev->clk_csi);
>> + clk_disable_unprepare(pcdev->clk_csi_ahb);
>> + clk_disable_unprepare(pcdev->clk_csi_per);
>> writel(0, pcdev->base_csi + CSICR1);
>> if (cpu_is_mx27()) {
>> writel(0, pcdev->base_emma + PRP_CNTL);
>> @@ -460,7 +462,11 @@ static int mx2_camera_add_device(struct
>> soc_camera_device *icd)
>> if (pcdev->icd)
>> return -EBUSY;
>>
>> - ret = clk_prepare_enable(pcdev->clk_csi);
>> + ret = clk_prepare_enable(pcdev->clk_csi_ahb);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = clk_prepare_enable(pcdev->clk_csi_per);
>> if (ret < 0)
>> return ret;
>>
>> @@ -1725,11 +1731,18 @@ static int __devinit mx2_camera_probe(struct
>> platform_device *pdev)
>> goto exit;
>> }
>>
>> - pcdev->clk_csi = devm_clk_get(&pdev->dev, "ahb");
>> - if (IS_ERR(pcdev->clk_csi)) {
>> - dev_err(&pdev->dev, "Could not get csi clock\n");
>> - err = PTR_ERR(pcdev->clk_csi);
>> - goto exit;
>> + pcdev->clk_csi_ahb = devm_clk_get(&pdev->dev, "ahb");
>> + if (IS_ERR(pcdev->clk_csi_ahb)) {
>> + dev_err(&pdev->dev, "Could not get csi ahb clock\n");
>> + err = PTR_ERR(pcdev->clk_csi_ahb);
>> + goto exit;
>> + }
>> +
>> + pcdev->clk_csi_per = devm_clk_get(&pdev->dev, "per");
>> + if (IS_ERR(pcdev->clk_csi_per)) {
>> + dev_err(&pdev->dev, "Could not get csi per clock\n");
>> + err = PTR_ERR(pcdev->clk_csi_per);
>> + goto exit_csi_ahb;
>> }
>>
>> pcdev->pdata = pdev->dev.platform_data;
>> @@ -1738,14 +1751,15 @@ static int __devinit mx2_camera_probe(struct
>> platform_device *pdev)
>>
>> pcdev->platform_flags = pcdev->pdata->flags;
>>
>> - rate = clk_round_rate(pcdev->clk_csi, pcdev->pdata->clk *
>> 2);
>> + rate = clk_round_rate(pcdev->clk_csi_per,
>> + pcdev->pdata->clk * 2);
>> if (rate <= 0) {
>> err = -ENODEV;
>> - goto exit;
>> + goto exit_csi_per;
>> }
>> - err = clk_set_rate(pcdev->clk_csi, rate);
>> + err = clk_set_rate(pcdev->clk_csi_per, rate);
>> if (err < 0)
>> - goto exit;
>> + goto exit_csi_per;
>> }
>>
>> INIT_LIST_HEAD(&pcdev->capture);
>> @@ -1801,7 +1815,7 @@ static int __devinit mx2_camera_probe(struct
>> platform_device *pdev)
>> goto exit_free_emma;
>>
>> dev_info(&pdev->dev, "MX2 Camera (CSI) driver probed, clock
>> frequency: %ld\n",
>> - clk_get_rate(pcdev->clk_csi));
>> + clk_get_rate(pcdev->clk_csi_per));
>>
>> return 0;
>>
>> @@ -1812,6 +1826,10 @@ eallocctx:
>> clk_disable_unprepare(pcdev->clk_emma_ipg);
>> clk_disable_unprepare(pcdev->clk_emma_ahb);
>> }
>> +exit_csi_per:
>> + clk_disable_unprepare(pcdev->clk_csi_per);
>> +exit_csi_ahb:
>> + clk_disable_unprepare(pcdev->clk_csi_ahb);
>> exit:
>> return err;
>> }
>> @@ -1831,6 +1849,9 @@ static int __devexit mx2_camera_remove(struct
>> platform_device *pdev)
>> clk_disable_unprepare(pcdev->clk_emma_ahb);
>> }
>>
>> + clk_disable_unprepare(pcdev->clk_csi_per);
>> + clk_disable_unprepare(pcdev->clk_csi_ahb);
>> +
>> dev_info(&pdev->dev, "MX2 Camera driver unloaded\n");
>>
>> return 0;
>>
> I only test detection at kernel boot not streaming using Gstreamer due to
> lack of time.
>
> On imx27_3ds board with ov2640 sensor:
> ov2640 0-0030: ov2640 Product ID 26:42 Manufacturer ID 7f:a2
> mx2-camera mx2-camera.0: MX2 Camera (CSI) driver probed, clock frequency:
> 44333333
>
> On clone imx27_3ds board with mt9v111 sensor (draft driver):
> mt9v111 0-0048: Detected a MT9V111 chip ID 823a
> mx2-camera mx2-camera.0: MX2 Camera (CSI) driver probed, clock frequency:
> 44333333
>
> Tested-by: Gaëtan Carlier <gcembed@xxxxxxxxx>
Sorry I missed patch 1/2. Both patches are correct:
Tested-by: Javier Martin <javier.martin@xxxxxxxxxxxxxxxxx>
--
Javier Martin
Vista Silicon S.L.
CDTUC - FASE C - Oficina S-345
Avda de los Castros s/n
39005- Santander. Cantabria. Spain
+34 942 25 32 60
www.vista-silicon.com
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
