The OMAP 3630 has configuration how the ISP CSI-2 PHY pins are connected to
the actual CSI-2 receivers outside the ISP itself. Allow changing this
configuration from the ISP driver.
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxx>
---
arch/arm/mach-omap2/control.c | 86 ++++++++++++++++++++++++++++
arch/arm/mach-omap2/control.h | 15 +++++
arch/arm/mach-omap2/include/mach/control.h | 13 ++++
3 files changed, 114 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-omap2/include/mach/control.h
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 3223b81..11bb900 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -12,9 +12,12 @@
*/
#undef DEBUG
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/io.h>
+#include <mach/control.h>
+
#include <plat/hardware.h>
#include <plat/sdrc.h>
@@ -607,4 +610,87 @@ int omap3_ctrl_save_padconf(void)
return 0;
}
+static int omap3630_ctrl_csi2_phy_cfg(u32 phy, u32 flags)
+{
+ u32 cam_phy_ctrl =
+ omap_ctrl_readl(OMAP3630_CONTROL_CAMERA_PHY_CTRL);
+ u32 shift, mode;
+
+ switch (phy) {
+ case OMAP3_CTRL_CSI2_PHY1_CCP2B:
+ cam_phy_ctrl &= ~OMAP3630_CONTROL_CAMERA_PHY_CTRL_CSI1_RX_SEL_PHY2;
+ shift = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY1_SHIFT;
+ break;
+ case OMAP3_CTRL_CSI2_PHY1_CSI2C:
+ shift = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY1_SHIFT;
+ mode = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_DPHY;
+ break;
+ case OMAP3_CTRL_CSI2_PHY2_CCP2B:
+ cam_phy_ctrl |= OMAP3630_CONTROL_CAMERA_PHY_CTRL_CSI1_RX_SEL_PHY2;
+ shift = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY2_SHIFT;
+ break;
+ case OMAP3_CTRL_CSI2_PHY2_CSI2A:
+ shift = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY2_SHIFT;
+ mode = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_DPHY;
+ break;
+ default:
+ pr_warn("bad phy %d\n", phy);
+ return -EINVAL;
+ }
+
+ /* Select data/clock or data/strobe mode for CCP2 */
+ switch (phy) {
+ case OMAP3_CTRL_CSI2_PHY1_CCP2B:
+ case OMAP3_CTRL_CSI2_PHY2_CCP2B:
+ if (flags & OMAP3_CTRL_CSI2_CFG_CCP2_DATA_STROBE)
+ mode = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_CCP2_DATA_STROBE;
+ else
+ mode = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_CCP2_DATA_CLOCK;
+ break;
+ }
+
+ cam_phy_ctrl &= ~(OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_MASK << shift);
+ cam_phy_ctrl |= mode << shift;
+
+ omap_ctrl_writel(cam_phy_ctrl,
+ OMAP3630_CONTROL_CAMERA_PHY_CTRL);
+
+ return 0;
+}
+
+static int omap3430_ctrl_csi2_phy_cfg(u32 phy, bool on, u32 flags)
+{
+ uint32_t csirxfe = OMAP343X_CONTROL_CSIRXFE_PWRDNZ
+ | OMAP343X_CONTROL_CSIRXFE_RESET;
+
+ /* Nothing to configure here. */
+ if (phy == OMAP3_CTRL_CSI2_PHY2_CSI2A)
+ return 0;
+
+ if (phy != OMAP3_CTRL_CSI2_PHY1_CCP2B)
+ return -EINVAL;
+
+ if (!on) {
+ omap_ctrl_writel(0, OMAP343X_CONTROL_CSIRXFE);
+ return 0;
+ }
+
+ if (flags & OMAP3_CTRL_CSI2_CFG_CCP2_DATA_STROBE)
+ csirxfe |= OMAP343X_CONTROL_CSIRXFE_SELFORM;
+
+ omap_ctrl_writel(csirxfe, OMAP343X_CONTROL_CSIRXFE);
+
+ return 0;
+}
+
+int omap3_ctrl_csi2_phy_cfg(u32 phy, bool on, u32 flags)
+{
+ if (cpu_is_omap3630() && on)
+ return omap3630_ctrl_csi2_phy_cfg(phy, flags);
+ if (cpu_is_omap3430())
+ return omap3430_ctrl_csi2_phy_cfg(phy, on, flags);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap3_ctrl_csi2_phy_cfg);
+
#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index b8cdc85..7b2ee5d 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -132,6 +132,11 @@
#define OMAP343X_CONTROL_MEM_DFTRW1 (OMAP2_CONTROL_GENERAL + 0x000c)
#define OMAP343X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0068)
#define OMAP343X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x006c)
+#define OMAP343X_CONTROL_CSIRXFE_CSIB_INV (1 << 7)
+#define OMAP343X_CONTROL_CSIRXFE_RESENABLE (1 << 8)
+#define OMAP343X_CONTROL_CSIRXFE_SELFORM (1 << 10)
+#define OMAP343X_CONTROL_CSIRXFE_PWRDNZ (1 << 12)
+#define OMAP343X_CONTROL_CSIRXFE_RESET (1 << 13)
#define OMAP343X_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0070)
#define OMAP343X_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0074)
#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG (OMAP2_CONTROL_GENERAL + 0x0078)
@@ -189,6 +194,16 @@
#define OMAP3630_CONTROL_FUSE_OPP50_VDD2 (OMAP2_CONTROL_GENERAL + 0x0128)
#define OMAP3630_CONTROL_FUSE_OPP100_VDD2 (OMAP2_CONTROL_GENERAL + 0x012C)
#define OMAP3630_CONTROL_CAMERA_PHY_CTRL (OMAP2_CONTROL_GENERAL + 0x02f0)
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY1_SHIFT 2
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY2_SHIFT 0
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_DPHY 0x0
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_CCP2_DATA_STROBE 0x1
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_CCP2_DATA_CLOCK 0x2
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_GPI 0x3
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_MASK 0x3
+/* CCP2B: set to receive data from PHY2 instead of PHY1 */
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CSI1_RX_SEL_PHY2 (1 << 4)
+
/* OMAP44xx control efuse offsets */
#define OMAP44XX_CONTROL_FUSE_IVA_OPP50 0x22C
diff --git a/arch/arm/mach-omap2/include/mach/control.h b/arch/arm/mach-omap2/include/mach/control.h
new file mode 100644
index 0000000..afd0bed
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/control.h
@@ -0,0 +1,13 @@
+#ifndef __MACH_CONTROL_H__
+#define __MACH_CONTROL_H__
+
+#define OMAP3_CTRL_CSI2_PHY2_CSI2A 0
+#define OMAP3_CTRL_CSI2_PHY2_CCP2B 1
+#define OMAP3_CTRL_CSI2_PHY1_CCP2B 2
+#define OMAP3_CTRL_CSI2_PHY1_CSI2C 3
+
+#define OMAP3_CTRL_CSI2_CFG_CCP2_DATA_STROBE (1 << 0)
+
+int omap3_ctrl_csi2_phy_cfg(u32 phy, bool on, u32 flags);
+
+#endif /* __MACH_CONTROL_H__ */
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
