Re: [PATCH v2] media: davinci: vpif: display: separate out subdev from output

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Hans,

On Mon, Sep 24, 2012 at 5:20 PM, Hans Verkuil <hverkuil@xxxxxxxxx> wrote:
> On Mon September 24 2012 12:59:11 Hans Verkuil wrote:
>> On Mon September 24 2012 12:44:11 Prabhakar wrote:
>> > From: Lad, Prabhakar <prabhakar.lad@xxxxxx>
>> >
>> > vpif_display relied on a 1-1 mapping of output and subdev. This is not
>> > necessarily the case. Separate the two. So there is a list of subdevs
>> > and a list of outputs. Each output refers to a subdev and has routing
>> > information. An output does not have to have a subdev.
>> >
>> > The initial output for each channel is set to the fist output.
>> >
>> > Currently missing is support for associating multiple subdevs with
>> > an output.
>> >
>> > Signed-off-by: Lad, Prabhakar <prabhakar.lad@xxxxxx>
>> > Signed-off-by: Manjunath Hadli <manjunath.hadli@xxxxxx>
>> > Cc: Hans Verkuil <hans.verkuil@xxxxxxxxx>
>> > Cc: Sekhar Nori <nsekhar@xxxxxx>
>>
>> Acked-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
>
> I'm retracting this Ack. I did see something that wasn't right but I thought
> it was harmless, but after thinking some more I believe it should be fixed.
> Luckily, it's easy to fix. See below. Since we need a new version anyway I
> also added a comment to a few minor issues that can be fixed at the same time.
>
>>
>> Regards,
>>
>>       Hans
>>
>> > ---
>> >  This patch is dependent on the patch series from Hans
>> >  (http://www.mail-archive.com/linux-media@xxxxxxxxxxxxxxx/msg52270.html)
>> >
>> >  Changes for V2:
>> >  1: Changed v4l2_device_call_until_err() call to v4l2_subdev_call() for
>> >     s_routing, since this call is for specific subdev, pointed out by Hans.
>> >
>> >  arch/arm/mach-davinci/board-da850-evm.c       |   29 +++++-
>> >  arch/arm/mach-davinci/board-dm646x-evm.c      |   39 ++++++-
>> >  drivers/media/platform/davinci/vpif_display.c |  136 ++++++++++++++++++++-----
>> >  include/media/davinci/vpif_types.h            |   20 +++-
>> >  4 files changed, 183 insertions(+), 41 deletions(-)
>> >
>> > diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
>> > index 3081ea4..23a7012 100644
>> > --- a/arch/arm/mach-davinci/board-da850-evm.c
>> > +++ b/arch/arm/mach-davinci/board-da850-evm.c
>> > @@ -46,6 +46,7 @@
>> >  #include <mach/spi.h>
>> >
>> >  #include <media/tvp514x.h>
>> > +#include <media/adv7343.h>
>> >
>> >  #define DA850_EVM_PHY_ID           "davinci_mdio-0:00"
>> >  #define DA850_LCD_PWR_PIN          GPIO_TO_PIN(2, 8)
>> > @@ -1257,16 +1258,34 @@ static struct vpif_subdev_info da850_vpif_subdev[] = {
>> >     },
>> >  };
>> >
>> > -static const char const *vpif_output[] = {
>> > -           "Composite",
>> > -           "S-Video",
>> > +static const struct vpif_output da850_ch0_outputs[] = {
>> > +   {
>> > +           .output = {
>> > +                   .index = 0,
>> > +                   .name = "Composite",
>> > +                   .type = V4L2_OUTPUT_TYPE_ANALOG,
>> > +           },
>> > +           .subdev_name = "adv7343",
>> > +           .output_route = ADV7343_COMPOSITE_ID,
>> > +   },
>> > +   {
>> > +           .output = {
>> > +                   .index = 1,
>> > +                   .name = "S-Video",
>> > +                   .type = V4L2_OUTPUT_TYPE_ANALOG,
>> > +           },
>> > +           .subdev_name = "adv7343",
>> > +           .output_route = ADV7343_SVIDEO_ID,
>> > +   },
>> >  };
>> >
>> >  static struct vpif_display_config da850_vpif_display_config = {
>> >     .subdevinfo   = da850_vpif_subdev,
>> >     .subdev_count = ARRAY_SIZE(da850_vpif_subdev),
>> > -   .output       = vpif_output,
>> > -   .output_count = ARRAY_SIZE(vpif_output),
>> > +   .chan_config[0] = {
>> > +           .outputs = da850_ch0_outputs,
>> > +           .output_count = ARRAY_SIZE(da850_ch0_outputs),
>> > +   },
>> >     .card_name    = "DA850/OMAP-L138 Video Display",
>> >  };
>> >
>> > diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
>> > index ad249c7..c206768 100644
>> > --- a/arch/arm/mach-davinci/board-dm646x-evm.c
>> > +++ b/arch/arm/mach-davinci/board-dm646x-evm.c
>> > @@ -26,6 +26,7 @@
>> >  #include <linux/i2c/pcf857x.h>
>> >
>> >  #include <media/tvp514x.h>
>> > +#include <media/adv7343.h>
>> >
>> >  #include <linux/mtd/mtd.h>
>> >  #include <linux/mtd/nand.h>
>> > @@ -496,18 +497,44 @@ static struct vpif_subdev_info dm646x_vpif_subdev[] = {
>> >     },
>> >  };
>> >
>> > -static const char *output[] = {
>> > -   "Composite",
>> > -   "Component",
>> > -   "S-Video",
>> > +static const struct vpif_output dm6467_ch0_outputs[] = {
>> > +   {
>> > +           .output = {
>> > +                   .index = 0,
>> > +                   .name = "Composite",
>> > +                   .type = V4L2_OUTPUT_TYPE_ANALOG,
>> > +           },
>> > +           .subdev_name = "adv7343",
>> > +           .output_route = ADV7343_COMPOSITE_ID,
>> > +   },
>> > +   {
>> > +           .output = {
>> > +                   .index = 1,
>> > +                   .name = "Component",
>> > +                   .type = V4L2_OUTPUT_TYPE_ANALOG,
>> > +           },
>> > +           .subdev_name = "adv7343",
>> > +           .output_route = ADV7343_COMPONENT_ID,
>> > +   },
>> > +   {
>> > +           .output = {
>> > +                   .index = 2,
>> > +                   .name = "S-Video",
>> > +                   .type = V4L2_OUTPUT_TYPE_ANALOG,
>> > +           },
>> > +           .subdev_name = "adv7343",
>> > +           .output_route = ADV7343_SVIDEO_ID,
>> > +   },
>> >  };
>> >
>> >  static struct vpif_display_config dm646x_vpif_display_config = {
>> >     .set_clock      = set_vpif_clock,
>> >     .subdevinfo     = dm646x_vpif_subdev,
>> >     .subdev_count   = ARRAY_SIZE(dm646x_vpif_subdev),
>> > -   .output         = output,
>> > -   .output_count   = ARRAY_SIZE(output),
>> > +   .chan_config[0] = {
>> > +           .outputs = dm6467_ch0_outputs,
>> > +           .output_count = ARRAY_SIZE(dm6467_ch0_outputs),
>> > +   },
>> >     .card_name      = "DM646x EVM",
>> >  };
>> >
>> > diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c
>> > index 8d1ce09..f68780f 100644
>> > --- a/drivers/media/platform/davinci/vpif_display.c
>> > +++ b/drivers/media/platform/davinci/vpif_display.c
>> > @@ -308,7 +308,7 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
>> >             channel2_intr_assert();
>> >             channel2_intr_enable(1);
>> >             enable_channel2(1);
>> > -           if (vpif_config_data->ch2_clip_en)
>> > +           if (vpif_config_data->chan_config[VPIF_CHANNEL2_VIDEO].clip_en)
>> >                     channel2_clipping_enable(1);
>> >     }
>> >
>> > @@ -317,7 +317,7 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
>> >             channel3_intr_assert();
>> >             channel3_intr_enable(1);
>> >             enable_channel3(1);
>> > -           if (vpif_config_data->ch3_clip_en)
>> > +           if (vpif_config_data->chan_config[VPIF_CHANNEL3_VIDEO].clip_en)
>> >                     channel3_clipping_enable(1);
>> >     }
>> >
>> > @@ -1174,14 +1174,16 @@ static int vpif_streamoff(struct file *file, void *priv,
>> >     if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
>> >             /* disable channel */
>> >             if (VPIF_CHANNEL2_VIDEO == ch->channel_id) {
>> > -                   if (vpif_config_data->ch2_clip_en)
>> > +                   if (vpif_config_data->
>> > +                           chan_config[VPIF_CHANNEL2_VIDEO].clip_en)
>> >                             channel2_clipping_enable(0);
>> >                     enable_channel2(0);
>> >                     channel2_intr_enable(0);
>> >             }
>> >             if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) ||
>> >                                     (2 == common->started)) {
>> > -                   if (vpif_config_data->ch3_clip_en)
>> > +                   if (vpif_config_data->
>> > +                           chan_config[VPIF_CHANNEL3_VIDEO].clip_en)
>> >                             channel3_clipping_enable(0);
>> >                     enable_channel3(0);
>> >                     channel3_intr_enable(0);
>> > @@ -1214,41 +1216,118 @@ static int vpif_enum_output(struct file *file, void *fh,
>> >  {
>> >
>> >     struct vpif_display_config *config = vpif_dev->platform_data;
>> > +   struct vpif_display_chan_config *chan_cfg;
>> > +   struct vpif_fh *vpif_handler = fh;
>> > +   struct channel_obj *ch = vpif_handler->channel;
>> >
>> > -   if (output->index >= config->output_count) {
>> > +   chan_cfg = &config->chan_config[ch->channel_id];
>> > +   if (output->index >= chan_cfg->output_count) {
>> >             vpif_dbg(1, debug, "Invalid output index\n");
>> >             return -EINVAL;
>> >     }
>> >
>> > -   strcpy(output->name, config->output[output->index]);
>> > -   output->type = V4L2_OUTPUT_TYPE_ANALOG;
>> > +   memcpy(output, &chan_cfg->outputs[output->index].output,
>> > +           sizeof(*output));
>
>         *output = chan_cfg->outputs[output->index].output;
>
>> >     output->std = VPIF_V4L2_STD;
>
Should I move 'VPIF_V4L2_STD' this macro to vpif_types.h ?

> This should be part of chan_cfg->outputs[output->index].output and not be
> overridden. If the output is a HDTV output, then std should be 0, otherwise
> it should be whatever the std is that is supported by the output.
>
> Really no different to what we do in vpif_capture.
>
Ok

>> >
>> >     return 0;
>> >  }
>> >
>> > +/**
>> > + * vpif_output_to_subdev() - Maps output to sub device
>> > + * @vpif_cfg - global config ptr
>> > + * @chan_cfg - channel config ptr
>> > + * @index - Given output index from application
>> > + *
>> > + * lookup the sub device information for a given output index.
>> > + * we report all the output to application. output table also
>> > + * has sub device name for the each output
>> > + */
>> > +static int
>> > +vpif_output_to_subdev(struct vpif_display_config *vpif_cfg,
>> > +                 struct vpif_display_chan_config *chan_cfg, int index)
>> > +{
>> > +   struct vpif_subdev_info *subdev_info;
>> > +   const char *subdev_name;
>> > +   int i;
>> > +
>> > +   vpif_dbg(2, debug, "vpif_output_to_subdev\n");
>> > +
>> > +   if (chan_cfg->outputs == NULL)
>> > +           return -1;
>> > +
>> > +   subdev_name = chan_cfg->outputs[index].subdev_name;
>> > +   if (subdev_name == NULL)
>> > +           return -1;
>> > +
>> > +   /* loop through the sub device list to get the sub device info */
>> > +   for (i = 0; i < vpif_cfg->subdev_count; i++) {
>> > +           subdev_info = &vpif_cfg->subdevinfo[i];
>> > +           if (!strcmp(subdev_info->name, subdev_name))
>> > +                   return i;
>> > +   }
>> > +   return -1;
>> > +}
>> > +
>> > +/**
>> > + * vpif_set_output() - Select an output
>> > + * @vpif_cfg - global config ptr
>> > + * @ch - channel
>> > + * @index - Given output index from application
>> > + *
>> > + * Select the given output.
>> > + */
>> > +static int vpif_set_output(struct vpif_display_config *vpif_cfg,
>> > +                 struct channel_obj *ch, int index)
>> > +{
>> > +   struct vpif_display_chan_config *chan_cfg =
>> > +           &vpif_cfg->chan_config[ch->channel_id];
>> > +   struct vpif_subdev_info *subdev_info = NULL;
>> > +   struct v4l2_subdev *sd = NULL;
>> > +   u32 input = 0, output = 0;
>> > +   int sd_index;
>> > +   int ret;
>> > +
>> > +   sd_index = vpif_output_to_subdev(vpif_cfg, chan_cfg, index);
>> > +   if (sd_index >= 0) {
>> > +           sd = vpif_obj.sd[sd_index];
>> > +           subdev_info = &vpif_cfg->subdevinfo[sd_index];
>> > +   }
>> > +
>> > +   if (sd) {
>> > +           input = chan_cfg->outputs[index].input_route;
>> > +           output = chan_cfg->outputs[index].output_route;
>> > +           ret = v4l2_subdev_call(sd, video, s_routing, input, output, 0);
>> > +           if (ret < 0) {
>
> Replace with:
>
>                 if (ret < 0 && ret != -ENOIOCTLCMD) {
>
> It's OK if the subdev doesn't support this s_routing operation.
>
Ok

>> > +                   vpif_err("Failed to set output\n");
>> > +                   return ret;
>> > +           }
>> > +
>> > +   }
>> > +   ch->output_idx = index;
>> > +   ch->sd = sd;
>
> Just like in the capture case you should update tvnorms:
>
>         ch->video_dev->tvnorms = chan_cfg->inputs[index].output.std;
>
> Make sure tvnorms is no longer set in vpif_video_template.
> Ditto for current_norm. Since vpif_display.c supports g_std the current_norm
> field shouldn't be used anymore.
>
> The capture case also updates vpifparams.iface:
>
>         ch->vpifparams.iface = chan_cfg->vpif_if;
>
> Isn't that needed for output as well?
>
The iface is never used  in display, so there isnt any necessity to assign it.

Regards,
--Prabhakar Lad

>> > +   return 0;
>> > +}
>> > +
>> >  static int vpif_s_output(struct file *file, void *priv, unsigned int i)
>> >  {
>> > +   struct vpif_display_config *config = vpif_dev->platform_data;
>> > +   struct vpif_display_chan_config *chan_cfg;
>> >     struct vpif_fh *fh = priv;
>> >     struct channel_obj *ch = fh->channel;
>> >     struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
>> > -   int ret = 0;
>> > +
>> > +   chan_cfg = &config->chan_config[ch->channel_id];
>> > +
>> > +   if (i >= chan_cfg->output_count)
>> > +           return -EINVAL;
>> >
>> >     if (common->started) {
>> >             vpif_err("Streaming in progress\n");
>> >             return -EBUSY;
>> >     }
>> >
>> > -   ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video,
>> > -                                                   s_routing, 0, i, 0);
>> > -
>> > -   if (ret < 0)
>> > -           vpif_err("Failed to set output standard\n");
>> > -
>> > -   ch->output_idx = i;
>> > -   if (vpif_obj.sd[i])
>> > -           ch->sd = vpif_obj.sd[i];
>> > -   return ret;
>> > +   return vpif_set_output(config, ch, i);
>> >  }
>> >
>> >  static int vpif_g_output(struct file *file, void *priv, unsigned int *i)
>> > @@ -1291,9 +1370,12 @@ vpif_enum_dv_timings(struct file *file, void *priv,
>> >  {
>> >     struct vpif_fh *fh = priv;
>> >     struct channel_obj *ch = fh->channel;
>> > +   int ret;
>> >
>> > -   return v4l2_subdev_call(vpif_obj.sd[ch->output_idx],
>> > -                   video, enum_dv_timings, timings);
>> > +   ret = v4l2_subdev_call(ch->sd, video, enum_dv_timings, timings);
>> > +   if (ret == -ENOIOCTLCMD && ret == -ENODEV)
>> > +           return -EINVAL;
>> > +   return ret;
>> >  }
>> >
>> >  /**
>> > @@ -1320,12 +1402,9 @@ static int vpif_s_dv_timings(struct file *file, void *priv,
>> >
>> >     /* Configure subdevice timings, if any */
>> >     ret = v4l2_subdev_call(ch->sd, video, s_dv_timings, timings);
>> > -   if (ret == -ENOIOCTLCMD) {
>> > -           vpif_dbg(2, debug, "Custom DV timings not supported by "
>> > -                           "subdevice\n");
>> > -           return -ENODATA;
>> > -   }
>> > -   if (ret < 0 && ret != -ENODEV) {
>> > +   if (ret == -ENOIOCTLCMD || ret == -ENODEV)
>> > +           ret = 0;
>> > +   if (ret < 0) {
>> >             vpif_dbg(2, debug, "Error setting custom DV timings\n");
>> >             return ret;
>> >     }
>> > @@ -1754,6 +1833,11 @@ static __init int vpif_probe(struct platform_device *pdev)
>> >             ch->video_dev->lock = &common->lock;
>> >             video_set_drvdata(ch->video_dev, ch);
>> >
>> > +           /* select output 0 */
>> > +           err = vpif_set_output(config, ch, 0);
>> > +           if (err)
>> > +                   goto probe_out;
>> > +
>> >             /* register video device */
>> >             vpif_dbg(1, debug, "channel=%x,channel->video_dev=%x\n",
>> >                             (int)ch, (int)&ch->video_dev);
>
> Regards,
>
>         Hans
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux