On Thu, Sep 20, 2012 at 2:54 PM, Oliver Schinagl <oliver+list@xxxxxxxxxxx> wrote: > dvbscan and dvbv5-scan does constantly say 'tuning failed' but it does say > that on my terratec too. It does work fine however, so probably a bug in > driver/tool unrelated to this patch. Just to be clear, the message "tuning failed" is expected behavior (albeit very misleading). Basically it means that the tuning attempt was performed but it failed to get a frequency lock on that channel. This is very common in cases where you're scanning a range of frequencies where many of them will not actually achieve a signal lock. I would really like to change that message to something more clear, especially since you're certainly not the first one to think it indicated there was a problem. Suggestions/patches welcome. Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
