alignment, fixed_phy_vdd and phy_enable fields are now unused
so removed them. The data alignment is now derived directly
from media bus pixel code, phy_enable callback has been replaced
with direct function call and fixed_phy_vdd was dropped in commit
438df3ebe5f0ce408490a777a758d5905f0dd58f
"[media] s5p-csis: Handle all available power supplies".
Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
include/linux/platform_data/mipi-csis.h | 15 ++++-----------
include/media/s5p_fimc.h | 2 --
2 files changed, 4 insertions(+), 13 deletions(-)
diff --git a/include/linux/platform_data/mipi-csis.h b/include/linux/platform_data/mipi-csis.h
index 2e59e43..8b703e1 100644
--- a/include/linux/platform_data/mipi-csis.h
+++ b/include/linux/platform_data/mipi-csis.h
@@ -1,7 +1,7 @@
/*
* Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
*
- * S5P series MIPI CSI slave device support
+ * Samsung S5P/Exynos SoC series MIPI CSIS device support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -13,21 +13,14 @@
/**
* struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
- * @clk_rate: bus clock frequency
- * @lanes: number of data lanes used
- * @alignment: data alignment in bits
- * @hs_settle: HS-RX settle time
- * @fixed_phy_vdd: false to enable external D-PHY regulator management in the
- * driver or true in case this regulator has no enable function
- * @phy_enable: pointer to a callback controlling D-PHY enable/reset
+ * @clk_rate: bus clock frequency
+ * @lanes: number of data lanes used
+ * @hs_settle: HS-RX settle time
*/
struct s5p_platform_mipi_csis {
unsigned long clk_rate;
u8 lanes;
- u8 alignment;
u8 hs_settle;
- bool fixed_phy_vdd;
- int (*phy_enable)(struct platform_device *pdev, bool on);
};
/**
diff --git a/include/media/s5p_fimc.h b/include/media/s5p_fimc.h
index 09421a61..eaea62a 100644
--- a/include/media/s5p_fimc.h
+++ b/include/media/s5p_fimc.h
@@ -30,7 +30,6 @@ struct i2c_board_info;
* @board_info: pointer to I2C subdevice's board info
* @clk_frequency: frequency of the clock the host interface provides to sensor
* @bus_type: determines bus type, MIPI, ITU-R BT.601 etc.
- * @csi_data_align: MIPI-CSI interface data alignment in bits
* @i2c_bus_num: i2c control bus id the sensor is attached to
* @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU)
* @clk_id: index of the SoC peripheral clock for sensors
@@ -40,7 +39,6 @@ struct s5p_fimc_isp_info {
struct i2c_board_info *board_info;
unsigned long clk_frequency;
enum cam_bus_type bus_type;
- u16 csi_data_align;
u16 i2c_bus_num;
u16 mux_id;
u16 flags;
--
1.7.11.3
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
