On 09/14/2012 12:27 PM, Rémi Cardona wrote:
- if kmalloc() returns NULL, we can return immediately without trying
to kfree() a NULL pointer.
- if i2c_transfer() fails, error out immediately instead of trying to
upload the remaining bytes of the firmware.
- the error code is then properly propagated down to ds3000_initfe().
Signed-off-by: Rémi Cardona <remi.cardona@xxxxxxxxxxxx>
Reviewed-by: Antti Palosaari <crope@xxxxxx>
Few comments still, you may change or leave unchanged. Those are still
old code and we are not expecting someone should fix as review findings.
Looks like ds3000_writeFW() is something like write multiple registers
with splitting I2C messages. IMHO it should be general routine to write
multiple registers (using register address auto-increment). Now it
multiplies I2C access routines for register write.
See for example tda10071 routines which could be just copy&pasted.
Also it uses hard-coded limit for slitting I2C message for 33 byte
chunks. Generally that limit is coming from the I2C-adapter hardware.
Also, allocing 33 byte of memory sounds overkill. Does anyone know good
rule of thumb what is size of buffer needed when make decision to alloc
instead of stack (non recursive Kernel function)?
---
drivers/media/dvb/frontends/ds3000.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/media/dvb/frontends/ds3000.c b/drivers/media/dvb/frontends/ds3000.c
index 6752222..162faaf 100644
--- a/drivers/media/dvb/frontends/ds3000.c
+++ b/drivers/media/dvb/frontends/ds3000.c
@@ -280,15 +280,14 @@ static int ds3000_tuner_writereg(struct ds3000_state *state, int reg, int data)
static int ds3000_writeFW(struct ds3000_state *state, int reg,
const u8 *data, u16 len)
{
- int i, ret = -EREMOTEIO;
+ int i, ret = 0;
struct i2c_msg msg;
u8 *buf;
buf = kmalloc(33, GFP_KERNEL);
if (buf == NULL) {
printk(KERN_ERR "Unable to kmalloc\n");
- ret = -ENOMEM;
- goto error;
+ return -ENOMEM;
}
*(buf) = reg;
@@ -308,8 +307,10 @@ static int ds3000_writeFW(struct ds3000_state *state, int reg,
printk(KERN_ERR "%s: write error(err == %i, "
"reg == 0x%02x\n", __func__, ret, reg);
ret = -EREMOTEIO;
+ goto error;
}
}
+ ret = 0;
error:
kfree(buf);
@@ -426,6 +427,7 @@ static int ds3000_load_firmware(struct dvb_frontend *fe,
const struct firmware *fw)
{
struct ds3000_state *state = fe->demodulator_priv;
+ int ret = 0;
dprintk("%s\n", __func__);
dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n",
@@ -438,10 +440,10 @@ static int ds3000_load_firmware(struct dvb_frontend *fe,
/* Begin the firmware load process */
ds3000_writereg(state, 0xb2, 0x01);
/* write the entire firmware */
- ds3000_writeFW(state, 0xb0, fw->data, fw->size);
+ ret = ds3000_writeFW(state, 0xb0, fw->data, fw->size);
ds3000_writereg(state, 0xb2, 0x00);
- return 0;
+ return ret;
}
static int ds3000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
