[PATCH] davinci: vpif: capture/display: fix race condition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Lad, Prabhakar <prabhakar.lad@xxxxxx>

channel_first_int[][] variable is used as a flag for the ISR,
This flag was being set after enabling the interrupts, There
where suitaions when the isr ocuurend even before the flag was set
dues to which it was causing the applicaiotn hang.
This patch sets  channel_first_int[][] flag just before enabling the
interrupt.

Reported-by: David Oleszkiewicz <doleszki@xxxxxxxxxxxxxxxxx>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@xxxxxx>
Signed-off-by: Manjunath Hadli <manjunath.hadli@xxxxxx>
Cc: Hans Verkuil <hans.verkuil@xxxxxxxxx>
---
 drivers/media/platform/davinci/vpif_capture.c |    2 +-
 drivers/media/platform/davinci/vpif_display.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/davinci/vpif_capture.c b/drivers/media/platform/davinci/vpif_capture.c
index 1b625b0..f64919b 100644
--- a/drivers/media/platform/davinci/vpif_capture.c
+++ b/drivers/media/platform/davinci/vpif_capture.c
@@ -339,6 +339,7 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
 	 * Set interrupt for both the fields in VPIF Register enable channel in
 	 * VPIF register
 	 */
+	channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1;
 	if ((VPIF_CHANNEL0_VIDEO == ch->channel_id)) {
 		channel0_intr_assert();
 		channel0_intr_enable(1);
@@ -350,7 +351,6 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
 		channel1_intr_enable(1);
 		enable_channel1(1);
 	}
-	channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1;
 
 	return 0;
 }
diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c
index 4a24848..523a840 100644
--- a/drivers/media/platform/davinci/vpif_display.c
+++ b/drivers/media/platform/davinci/vpif_display.c
@@ -302,6 +302,7 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
 
 	/* Set interrupt for both the fields in VPIF
 	    Register enable channel in VPIF register */
+	channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1;
 	if (VPIF_CHANNEL2_VIDEO == ch->channel_id) {
 		channel2_intr_assert();
 		channel2_intr_enable(1);
@@ -318,7 +319,6 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
 		if (vpif_config_data->ch3_clip_en)
 			channel3_clipping_enable(1);
 	}
-	channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1;
 
 	return 0;
 }
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux