On Sat, Sep 08, 2012 at 10:23:31PM -0400, Adam Rosi-Kessel wrote: > On Fri, Sep 07, 2012 at 06:18:31PM +0400, volokh@xxxxxxxxx wrote: > > On Thu, Sep 06, 2012 at 11:10:14PM +0400, Volokh Konstantin wrote: > > > On Mon, Sep 03, 2012 at 02:37:16PM -0400, Adam Rosi-Kessel wrote: > > > > > > > > [469.928881] wis-saa7115: initializing SAA7115 at address 32 on WIS > > > > GO7007SB EZ-USB > > > > > > > > [469.989083] go7007: probing for module i2c:wis_saa7115 failed > > > > > > > > [470.004785] wis-uda1342: initializing UDA1342 at address 26 on WIS > > > > GO7007SB EZ-USB > > > > > > > > [470.005454] go7007: probing for module i2c:wis_uda1342 failed > > > > > > > > [470.011659] wis-sony-tuner: initializing tuner at address 96 on WIS > > > > GO7007SB EZ-USB > > Hi, I generated patchs, that u may in your own go7007/ folder > > It contains go7007 initialization and i2c_subdev fixing > > > > It was checked for 3.6 branch (compile only) > > So I have this installed now (patched with your 3.6 patch) but I'm not > seeing the device. > > The module is there: > > [ 416.189030] Linux media interface: v0.10 > [ 416.198616] Linux video capture interface: v2.00 > [ 416.220656] wis_uda1342: module is from the staging directory, the quality is unknown, you have been warned. > > # lsmod|grep -i go7 > go7007_usb 10059 0 > go7007 46966 1 go7007_usb > v4l2_common 4206 1 go7007 > videodev 78250 2 go7007,v4l2_common > > # uname -a > Linux storage 3.6.0-rc4.ajk+ #5 SMP Sat Sep 8 22:05:57 EDT 2012 i686 GNU/Linux > > # grep -i go7 /boot/config-`uname -r` > CONFIG_VIDEO_GO7007=m > CONFIG_VIDEO_GO7007_USB=m > CONFIG_VIDEO_GO7007_OV7640=m > # CONFIG_VIDEO_GO7007_SAA7113 is not set Linux must autoload these modules for working: wis-saa7115 wis-uda1342 wis-sony-tuner, so need set m below: > # CONFIG_VIDEO_GO7007_SAA7115 is not set > CONFIG_VIDEO_GO7007_TW9903=m > CONFIG_VIDEO_GO7007_UDA1342=m > CONFIG_VIDEO_GO7007_SONY_TUNER=m > CONFIG_VIDEO_GO7007_TW2804=m after compilation need install modules, or handly load them. modprobe wis-saa7115, etc ... for each modules. > > But I'm not getting any device to appear: > > # ls /dev/video* > ls: cannot access /dev/video*: No such file or directory > # gorecord -format mpeg4 test.avi > Driver loaded but no GO7007 devices found. > Is the device connected properly? > > When I connect the device I see this: > > [ 585.705406] usb 1-4: udev 4, busnum 1, minor = 3 > [ 585.705412] usb 1-4: New USB device found, idVendor=093b, idProduct=a004 > [ 585.705415] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > [ 585.705532] usb 1-4: usb_probe_device > [ 585.705535] usb 1-4: configuration #1 chosen from 1 choice > [ 585.706233] usb 1-4: adding 1-4:1.0 (config #1, interface 0) > > But no video node. > > Am I missing something? > > Adam -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
