Hi All/Antti,
I used Antti's previous patch to try to get some support in for the Asus
MyCinema U3100Mini Plus as it uses a supported driver (af9035) and now
supported tuner (FCI FC2580).
It compiles fine and almost works :(
Here's what I get, which I have no idea what causes it.
dmesg output:
[ 380.677434] usb 1-3: New USB device found, idVendor=0b05, idProduct=1779
[ 380.677445] usb 1-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 380.677452] usb 1-3: Product: AF9035A USB Device
[ 380.677458] usb 1-3: Manufacturer: Afa Technologies Inc.
[ 380.677463] usb 1-3: SerialNumber: AF01020abcdef12301
[ 380.683361] input: Afa Technologies Inc. AF9035A USB Device as
/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.1/input/input15
[ 380.683505] hid-generic 0003:0B05:1779.0004: input: USB HID v1.01
Keyboard [Afa Technologies Inc. AF9035A USB Device] on
usb-0000:00:12.2-3/input1
[ 380.703807] usbcore: registered new interface driver dvb_usb_af9035
[ 380.704553] usb 1-3: dvb_usbv2: found a 'Asus U3100Mini Plus' in cold
state
[ 380.705075] usb 1-3: dvb_usbv2: downloading firmware from file
'dvb-usb-af9035-02.fw'
[ 381.014996] dvb_usb_af9035: firmware version=11.5.9.0
[ 381.015018] usb 1-3: dvb_usbv2: found a 'Asus U3100Mini Plus' in warm
state
[ 381.017172] usb 1-3: dvb_usbv2: will pass the complete MPEG2
transport stream to the software demuxer
[ 381.017242] DVB: registering new adapter (Asus U3100Mini Plus)
[ 381.037184] af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
[ 381.037200] usb 1-3: DVB: registering adapter 0 frontend 0 (Afatech
AF9033 (DVB-T))...
[ 381.044197] i2c i2c-1: fc2580: i2c rd failed=-5 reg=01 len=1
[ 381.044357] usb 1-3: dvb_usbv2: 'Asus U3100Mini Plus' error while
loading driver (-19)
using the following modules.
fc2580 4189 -1
af9033 10266 0
dvb_usb_af9035 8924 0
dvb_usbv2 11388 1 dvb_usb_af9035
dvb_core 71756 1 dvb_usbv2
rc_core 10583 2 dvb_usbv2,dvb_usb_af9035
I'm supprised though that dvb-pll isn't there. Wasn't that a
requirement? [1]
For the tuner 'script' firmware/init bit, I used the 'official' driver [2].
Also the i2c-addr and clock comes from these files.
One minor questions I have regarding the recently submitted RTL and
AF9033 drivers, is one uses AF9033_TUNER_* whereas the other uses
TUNER_RTL2832_*. Any reason for this? It just confused me is all.
Oliver
[1] http://linuxtv.org/wiki/index.php/DVB_via_USB#Introduction
[2] http://git.schinagl.nl/AF903x_SRC.git/tree/api/FCI_FC2580_Script.h
On 09/09/12 22:47, oliver@xxxxxxxxxxx wrote:
From: Oliver Schinagl<oliver@xxxxxxxxxxx>
Initial support for the Asus MyCinema U3100Mini Plus. This currently
does not work however. It uses teh af9033/5 demodulater with an
FCI FC2580 tuner.
Signed-off-by: Oliver Schinagl<oliver@xxxxxxxxxxx>
---
drivers/media/dvb-core/dvb-usb-ids.h | 1 +
drivers/media/dvb-frontends/af9033.c | 4 ++++
drivers/media/dvb-frontends/af9033.h | 1 +
drivers/media/dvb-frontends/af9033_priv.h | 36 +++++++++++++++++++++++++++++++
drivers/media/usb/dvb-usb-v2/Kconfig | 1 +
drivers/media/usb/dvb-usb-v2/af9035.c | 12 +++++++++++
drivers/media/usb/dvb-usb-v2/af9035.h | 1 +
7 files changed, 56 insertions(+)
diff --git a/drivers/media/dvb-core/dvb-usb-ids.h b/drivers/media/dvb-core/dvb-usb-ids.h
index d572307..58e0220 100644
--- a/drivers/media/dvb-core/dvb-usb-ids.h
+++ b/drivers/media/dvb-core/dvb-usb-ids.h
@@ -329,6 +329,7 @@
#define USB_PID_ASUS_U3000 0x171f
#define USB_PID_ASUS_U3000H 0x1736
#define USB_PID_ASUS_U3100 0x173f
+#define USB_PID_ASUS_U3100MINI_PLUS 0x1779
#define USB_PID_YUAN_EC372S 0x1edc
#define USB_PID_YUAN_STK7700PH 0x1f08
#define USB_PID_YUAN_PD378S 0x2edc
diff --git a/drivers/media/dvb-frontends/af9033.c b/drivers/media/dvb-frontends/af9033.c
index cd8c883..1568c6a 100644
--- a/drivers/media/dvb-frontends/af9033.c
+++ b/drivers/media/dvb-frontends/af9033.c
@@ -318,6 +318,10 @@ static int af9033_init(struct dvb_frontend *fe)
len = ARRAY_SIZE(tuner_init_tda18218);
init = tuner_init_tda18218;
break;
+ case AF9033_TUNER_FC2580:
+ len = ARRAY_SIZE(tuner_init_fc2580);
+ init = tuner_init_fc2580;
+ break;
default:
pr_debug("%s: unsupported tuner ID=%d\n", __func__,
state->cfg.tuner);
diff --git a/drivers/media/dvb-frontends/af9033.h b/drivers/media/dvb-frontends/af9033.h
index 9e302c3..3dd6edd 100644
--- a/drivers/media/dvb-frontends/af9033.h
+++ b/drivers/media/dvb-frontends/af9033.h
@@ -42,6 +42,7 @@ struct af9033_config {
#define AF9033_TUNER_FC0011 0x28 /* Fitipower FC0011 */
#define AF9033_TUNER_MXL5007T 0xa0 /* MaxLinear MxL5007T */
#define AF9033_TUNER_TDA18218 0xa1 /* NXP TDA 18218HN */
+#define AF9033_TUNER_FC2580 0x32 /* FCI FC2580 */
u8 tuner;
/*
diff --git a/drivers/media/dvb-frontends/af9033_priv.h b/drivers/media/dvb-frontends/af9033_priv.h
index 0b783b9..4126255 100644
--- a/drivers/media/dvb-frontends/af9033_priv.h
+++ b/drivers/media/dvb-frontends/af9033_priv.h
@@ -466,5 +466,41 @@ static const struct reg_val tuner_init_tda18218[] = {
{0x80f1e6, 0x00},
};
+static const struct reg_val tuner_init_fc2580[] = {
+ { 0x800046, AF9033_TUNER_FC2580 },
+ { 0x800057, 0x01 },
+ { 0x800058, 0x00 },
+ { 0x80005f, 0x00 },
+ { 0x800060, 0x00 },
+ { 0x800071, 0x05 },
+ { 0x800072, 0x02 },
+ { 0x800074, 0x01 },
+ { 0x800079, 0x01 },
+ { 0x800093, 0x00 },
+ { 0x800094, 0x00 },
+ { 0x800095, 0x00 },
+ { 0x800096, 0x05 },
+ { 0x8000b3, 0x01 },
+ { 0x8000c3, 0x01 },
+ { 0x8000c4, 0x00 },
+ { 0x80f007, 0x00 },
+ { 0x80f00c, 0x19 },
+ { 0x80f00d, 0x1A },
+ { 0x80f00e, 0x00 },
+ { 0x80f00f, 0x02 },
+ { 0x80f010, 0x00 },
+ { 0x80f011, 0x02 },
+ { 0x80f012, 0x00 },
+ { 0x80f013, 0x02 },
+ { 0x80f014, 0x00 },
+ { 0x80f015, 0x02 },
+ { 0x80f01f, 0x96 },
+ { 0x80f020, 0x00 },
+ { 0x80f029, 0x96 },
+ { 0x80f02a, 0x00 },
+ { 0x80f077, 0x01 },
+ { 0x80f1e6, 0x01 },
+};
+
#endif /* AF9033_PRIV_H */
diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig
index e09930c..834bfec 100644
--- a/drivers/media/usb/dvb-usb-v2/Kconfig
+++ b/drivers/media/usb/dvb-usb-v2/Kconfig
@@ -40,6 +40,7 @@ config DVB_USB_AF9035
select MEDIA_TUNER_FC0011 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA18218 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_FC2580 if MEDIA_SUBDRV_AUTOSELECT
help
Say Y here to support the Afatech AF9035 based DVB USB receiver.
diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c
index 9e5bbf9..952fbdb 100644
--- a/drivers/media/usb/dvb-usb-v2/af9035.c
+++ b/drivers/media/usb/dvb-usb-v2/af9035.c
@@ -546,6 +546,7 @@ static int af9035_read_config(struct dvb_usb_device *d)
case AF9033_TUNER_FC0011:
case AF9033_TUNER_MXL5007T:
case AF9033_TUNER_TDA18218:
+ case AF9033_TUNER_FC2580:
state->af9033_config[i].spec_inv = 1;
break;
default:
@@ -798,6 +799,11 @@ static struct tda18218_config af9035_tda18218_config = {
.i2c_wr_max = 21,
};
+static struct fc2580_config af9035_fc2580_config = {
+ .i2c_addr = 0xac,
+ .clock = 16384000,
+};
+
static int af9035_tuner_attach(struct dvb_usb_adapter *adap)
{
struct state *state = adap_to_priv(adap);
@@ -903,6 +909,10 @@ static int af9035_tuner_attach(struct dvb_usb_adapter *adap)
fe = dvb_attach(tda18218_attach, adap->fe[0],
&d->i2c_adap,&af9035_tda18218_config);
break;
+ case AF9033_TUNER_FC2580:
+ fe = dvb_attach(fc2580_attach, adap->fe[0],
+ &d->i2c_adap,&af9035_fc2580_config);
+ break;
default:
fe = NULL;
}
@@ -1126,6 +1136,8 @@ static const struct usb_device_id af9035_id_table[] = {
&af9035_props, "AVerMedia HD Volar (A867)", NULL) },
{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TWINSTAR,
&af9035_props, "AVerMedia Twinstar (A825)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100MINI_PLUS,
+ &af9035_props, "Asus U3100Mini Plus", NULL) },
{ }
};
MODULE_DEVICE_TABLE(usb, af9035_id_table);
diff --git a/drivers/media/usb/dvb-usb-v2/af9035.h b/drivers/media/usb/dvb-usb-v2/af9035.h
index bb7bc7a..4864d9a 100644
--- a/drivers/media/usb/dvb-usb-v2/af9035.h
+++ b/drivers/media/usb/dvb-usb-v2/af9035.h
@@ -28,6 +28,7 @@
#include "fc0011.h"
#include "mxl5007t.h"
#include "tda18218.h"
+#include "fc2580.h"
struct reg_val {
u32 reg;
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html