Re: [PATCH 10/12] [media] move i2c files into drivers/media/i2c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/06/2012 04:07 PM, Mauro Carvalho Chehab wrote:
> Em 24-08-2012 20:44, Sylwester Nawrocki escreveu:
>> From: Sylwester Nawrocki<sylvester.nawrocki@xxxxxxxxx>
>> Date: Sat, 25 Aug 2012 01:23:14 +0200
>> Subject: [PATCH] [media] Fix link order of the V4L2 bridge and I2C modules
>>
>> All I2C modules must be linked first to ensure proper module
>> initialization order. With platform devices linked before I2C
>> modules I2C subdev registration fails as the subdev drivers
>> are not yet initialized during bridge driver's probing.
>>
>> This fixes regression introduced with commmit cb7a01ac324bf2ee2,
>> "[media] move i2c files into drivers/media/i2c".
>>
>> Signed-off-by: Sylwester Nawrocki<sylvester.nawrocki@xxxxxxxxx>
>> ---
>>   drivers/media/Makefile |    7 ++++---
>>   1 files changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/media/Makefile b/drivers/media/Makefile
>> index b0b0193..92a8bcf 100644
>> --- a/drivers/media/Makefile
>> +++ b/drivers/media/Makefile
>> @@ -8,8 +8,9 @@ ifeq ($(CONFIG_MEDIA_CONTROLLER),y)
>>     obj-$(CONFIG_MEDIA_SUPPORT) += media.o
>>   endif
>>
>> -obj-y += tuners/ common/ rc/ platform/
>> -obj-y += i2c/ pci/ usb/ mmc/ firewire/ parport/
>> +obj-$(CONFIG_VIDEO_DEV) += v4l2-core/
>> +obj-y += common/ rc/ i2c/
>> +obj-y += tuners/ platform/ pci/ usb/ mmc/ firewire/ parport/
>>
>> -obj-$(CONFIG_VIDEO_DEV) += radio/ v4l2-core/
>> +obj-$(CONFIG_VIDEO_DEV) += radio/
>>   obj-$(CONFIG_DVB_CORE)  += dvb-core/ dvb-frontends/
>> -- 1.7.4.1
> 
> Hmm... This change seems incomplete on my eyes: tuners and dvb-frontends
> are also I2C drivers. So, while this fixes the issue for platform drivers,
> other drivers will still suffer this issue, at least on drivers that doesn't
> depend on drivers located outside the media subsystem[1]

Yeah, that's possible. I wasn't very confident about anything but platform 
and i2c drivers. Thanks for improving it. I tested the patch with a camera 
host and I2C sensor driver and it also fixed the problem.

> [1] thankfully, staging compiles after media, so the drivers there
> shouldn't be affected. Also, drivers that use alsa won't be affected, as
> alsa core (with is compiled after media) uses subsys_initcall().
> 
> IMO, the correct fix is the one below. Could you please test it?
> 
> Regards,
> Mauro
> 
> -
> 
> [media] Fix init order for I2C drivers
> 
> Based on a patch from Sylvester Nawrocki
> 
> This fixes regression introduced with commmit cb7a01ac324bf2ee2,
> "[media] move i2c files into drivers/media/i2c".
> 
> The linked order affect what drivers will be initialized first, when
> they're built-in at Kernel. While there are macros that allow changing
> the init order, like subsys_initcall(), late_initcall()&  friends,
> when all drivers  linked belong to the same subsystem, it is easier
> to change the order at the Makefile.
> 
> All I2C modules must be linked before any drivers that actually use it,
> in order to ensure proper module initialization order.
> 
> Also, the core drivers should be initialized before the drivers that use
> them.
> 
> This patch reorders the drivers init, in order to fulfill the above
> requirements.
> 
> Reported-by: Sylwester Nawrocki<sylvester.nawrocki@xxxxxxxxx>
> Signed-off-by: Mauro Carvalho Chehab<mchehab@xxxxxxxxxx>
 
Acked-by: Sylwester Nawrocki <sylvester.nawrocki@xxxxxxxxx>
 
> diff --git a/drivers/media/Makefile b/drivers/media/Makefile
> index b0b0193..620f275 100644
> --- a/drivers/media/Makefile
> +++ b/drivers/media/Makefile
> @@ -4,12 +4,30 @@
> 
>   media-objs	:= media-device.o media-devnode.o media-entity.o
> 
> +#
> +# I2C drivers should come before other drivers, otherwise they'll fail
> +# when compiled as builtin drivers
> +#
> +obj-y += i2c/ tuners/
> +obj-$(CONFIG_DVB_CORE)  += dvb-frontends/
> +
> +#
> +# Now, let's link-in the media core
> +#
>   ifeq ($(CONFIG_MEDIA_CONTROLLER),y)
>     obj-$(CONFIG_MEDIA_SUPPORT) += media.o
>   endif
> 
> -obj-y += tuners/ common/ rc/ platform/
> -obj-y += i2c/ pci/ usb/ mmc/ firewire/ parport/
> +obj-$(CONFIG_VIDEO_DEV) += v4l2-core/
> +obj-$(CONFIG_DVB_CORE)  += dvb-core/
> +
> +# There are both core and drivers at RC subtree - merge before drivers
> +obj-y += rc/
> +
> +#
> +# Finally, merge the drivers that require the core
> +#
> +
> +obj-y += common/ platform/ pci/ usb/ mmc/ firewire/ parport/
> +obj-$(CONFIG_VIDEO_DEV) += radio/
> 
> -obj-$(CONFIG_VIDEO_DEV) += radio/ v4l2-core/
> -obj-$(CONFIG_DVB_CORE)  += dvb-core/ dvb-frontends/

--

Regards,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux