On 09/01/2012 04:33 PM, poma wrote:
On 08/22/2012 01:56 AM, Antti Palosaari wrote:Stream did not start anymore after stream was stopped once. Following error can be seen, xhci_hcd WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. usb_clear_halt for streaming endpoint helps. Signed-off-by: Antti Palosaari <crope@xxxxxx> --- drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c index d2b1505..1ccb99b 100644 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c @@ -834,6 +834,7 @@ static int rtl28xxu_streaming_ctrl(struct dvb_frontend *fe , int onoff) if (onoff) { buf[0] = 0x00; buf[1] = 0x00; + usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x81)); } else { buf[0] = 0x10; /* stall EPA */ buf[1] = 0x02; /* reset EPA */After every soft/warm [re]boot only after first scandvb: ------------[ cut here ]------------ WARNING: at drivers/usb/host/ehci-hcd.c:1226 ehci_endpoint_reset+0x111/0x120() Hardware name: M720-US3 clear_halt for a busy endpoint Modules linked in: fc0012(O) rtl2832(O) dvb_usb_rtl28xxu(O) rtl2830(O) dvb_usbv2(O) dvb_core(O) nvidia(PO) tvaudio(O) tda7432(O) msp3400(O) tuner_simple(O) tuner_types(O) wm8775(O) snd_hda_codec_realtek tda9887(O) tda8290(O) tuner(O) cx25840(O) snd_hda_intel snd_bt87x bttv(O) ivtv(O) snd_hda_codec snd_hwdep tveeprom(O) cx2341x(O) btcx_risc(O) snd_pcm snd_page_alloc snd_timer snd soundcore ppdev videobuf_dma_sg(O) videobuf_core(O) v4l2_common(O) parport_serial parport_pc parport videodev(O) edac_core media(O) i2c_nforce2 rc_core(O) i2c_algo_bit microcode i2c_core edac_mce_amd vhost_net tun macvtap macvlan kvm_amd kvm uinput binfmt_misc raid1 r8169 ata_generic pata_acpi mii usb_storage skge pata_amd wmi sunrpc be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi [last unloaded: scsi_wait_scan] Pid: 1170, comm: scandvb Tainted: P O 3.5.2-3.fc17.x86_64 #1 Call Trace: [<ffffffff810584bf>] warn_slowpath_common+0x7f/0xc0 [<ffffffff810585b6>] warn_slowpath_fmt+0x46/0x50 [<ffffffff81444a31>] ehci_endpoint_reset+0x111/0x120 [<ffffffff8142c135>] usb_hcd_reset_endpoint+0x25/0x70 [<ffffffff8142d468>] usb_reset_endpoint+0x28/0x40 [<ffffffff8142e06e>] usb_clear_halt+0x6e/0x80 [<ffffffffa0f2baed>] rtl28xxu_streaming_ctrl+0xad/0x110 [dvb_usb_rtl28xxu] [<ffffffffa0f50375>] dvb_usb_start_feed+0x235/0x440 [dvb_usbv2] [<ffffffff8115ca5d>] ? __vmalloc_node_range+0x17d/0x240 [<ffffffffa0f111b9>] ? dvb_dmxdev_filter_start+0x2c9/0x3e0 [dvb_core] [<ffffffffa0f12b00>] dmx_section_feed_start_filtering+0xe0/0x180 [dvb_core] [<ffffffffa0f110fe>] dvb_dmxdev_filter_start+0x20e/0x3e0 [dvb_core] [<ffffffffa0f11945>] dvb_demux_do_ioctl+0x405/0x640 [dvb_core] [<ffffffffa0f11540>] ? dvb_dvr_do_ioctl+0x130/0x130 [dvb_core] [<ffffffffa0f0fa36>] dvb_usercopy+0x86/0x1d0 [dvb_core] [<ffffffff811976d1>] ? do_filp_open+0x41/0xa0 [<ffffffffa0f0ffa5>] dvb_demux_ioctl+0x15/0x20 [dvb_core] [<ffffffff811996c9>] do_vfs_ioctl+0x99/0x580 [<ffffffff812793da>] ? inode_has_perm.isra.31.constprop.61+0x2a/0x30 [<ffffffff8127a9b7>] ? file_has_perm+0x97/0xb0 [<ffffffff81199c49>] sys_ioctl+0x99/0xa0 [<ffffffff81614969>] system_call_fastpath+0x16/0x1b ---[ end trace cce2913a24da6585 ]--- media_build commit 420335f564c32517a791ecea3909af233925634d
That is already fixed, but I haven't sent patch yet. Currently last patch: http://git.linuxtv.org/anttip/media_tree.git/shortlog/refs/heads/for_v3.7-10 Mabbe I will sent that fix out to mailing list right now. regards Antti -- http://palosaari.fi/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
