Hello,
On 2012-08-25 01:27, Guennadi Liakhovetski wrote:
[snip]
> csi2: csi2@0xffc90000 {
> compatible = "renesas,sh-mobile-csi2";
> reg = <0xffc90000 0x1000>;
> interrupts = <0x17a0>;
> #address-cells = <1>;
> #size-cells = <0>;
>
> /* Ok to have them global? */
> clock-lanes = <0>;
> data-lanes = <2>, <1>;
>
> ...
> imx074_1: videolink@1 {
> reg = <1>;
> client = <&imx074 0>;
> bus-width = <2>;
>
> csi2-ecc;
> csi2-crc;
>
> renesas,csi2-phy = <0>;
> };
> ceu0: videolink@0 {
> reg = <0>;
> immutable;
> };
> };
videolink@1 makes the description of the CSI-2 rx board-specific. Would it be
possible to keep the description of the SoC nodes board-agnostic to ease reuse
of the SoC description in multiple board DTs?
Would this be as simple as replacing &imx074 with a generic well-known name
defined in the board part of the DT?
Best regards,
Nicolas--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
