I am trying to setup a Compro U680F USB DVB-T adaptor in Ubuntu 12.04 (kernel 3.2.0-29-generic). The compro device ID is given (lsusb) as 185b:0680. The following page suggests this device is supported by the RT2832U driver: http://www.dfragos.me/2011/11/installation-of-the-rt2832u-driver-in-linux/ I successfully built the v4l-dvb package from source following this how to, using the "Basic Approach": http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_D evice_Drivers After restarting the system the device does not appear to be working. The output from "lsmod | grep dvb" is as follows: root@DCTbox:/home/dct# lsmod | grep dvb dvb_usb 32369 0 dvb_core 110590 1 dvb_usb rc_core 26343 1 dvb_usb If I unplug the device and plug back in, I get the following from "dmesg | tail": root@DCTbox:/home/dct# dmesg | tail -n 27 [ 160.015155] usb 5-2: new high-speed USB device number 4 using xhci_hcd [ 160.051152] usb 5-2: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes [ 160.133825] WARNING: You are using an experimental version of the media stack. [ 160.133826] As the driver is backported to an older kernel, it doesn't offer [ 160.133827] enough quality for its usage in production. [ 160.133828] Use it with care. [ 160.133829] Latest git patches (needed if you report a bug to linux-media@xxxxxxxxxxxxxxx): [ 160.133830] 9b78c5a3007e10a172d4e83bea18509fdff2e8e3 [media] b2c2: export b2c2_flexcop_debug symbol [ 160.133832] 88f8472c9fc6c08f5113887471f1f4aabf7b2929 [media] Fix some Makefile rules [ 160.133833] 893430558e5bf116179915de2d3d119ad25c01cf [media] cx23885-cards: fix netup card default revision [ 160.144374] WARNING: You are using an experimental version of the media stack. [ 160.144376] As the driver is backported to an older kernel, it doesn't offer [ 160.144377] enough quality for its usage in production. [ 160.144378] Use it with care. [ 160.144379] Latest git patches (needed if you report a bug to linux-media@xxxxxxxxxxxxxxx): [ 160.144380] 9b78c5a3007e10a172d4e83bea18509fdff2e8e3 [media] b2c2: export b2c2_flexcop_debug symbol [ 160.144381] 88f8472c9fc6c08f5113887471f1f4aabf7b2929 [media] Fix some Makefile rules [ 160.144383] 893430558e5bf116179915de2d3d119ad25c01cf [media] cx23885-cards: fix netup card default revision [ 160.173311] dvb_usb_rtl2832u: disagrees about version of symbol dvb_usb_device_init [ 160.173315] dvb_usb_rtl2832u: Unknown symbol dvb_usb_device_init (err -22) [ 392.860811] dvb_usb_rtl2832u: disagrees about version of symbol dvb_usb_device_init [ 392.860815] dvb_usb_rtl2832u: Unknown symbol dvb_usb_device_init (err -22) [ 1282.328055] usb 5-2: USB disconnect, device number 4 [ 1288.697208] usb 5-2: new high-speed USB device number 5 using xhci_hcd [ 1288.732785] usb 5-2: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes [ 1288.747585] dvb_usb_rtl2832u: disagrees about version of symbol dvb_usb_device_init [ 1288.747589] dvb_usb_rtl2832u: Unknown symbol dvb_usb_device_init (err -22) If I attempt to load the driver manually I get the following error message: root@DCTbox:/home/dct# modprobe dvb_usb_rtl2832u FATAL: Error inserting dvb_usb_rtl2832u (/lib/modules/3.2.0-29-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-rtl2 832u.ko): Invalid argument Any advice on how to get this device working successfully would be greatly appreciated. Kind regards, Marc -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
