The Pioneer CU-700 remote causes receiver overflows if you hold down any button. The remote does not send NEC IR repeats, it repeats the entire NEC code after 20ms. The iguanair hardware advertises an interval of 10 which just not enough; with 100 URBs per second and at most 7 edges per URB, we handle at most 700 edges per second. The remote generates about 900. Signed-off-by: Sean Young <sean@xxxxxxxx> --- drivers/media/rc/iguanair.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/media/rc/iguanair.c b/drivers/media/rc/iguanair.c index 9810008..6a09c2e 100644 --- a/drivers/media/rc/iguanair.c +++ b/drivers/media/rc/iguanair.c @@ -484,9 +484,8 @@ static int __devinit iguanair_probe(struct usb_interface *intf, init_completion(&ir->completion); pipein = usb_rcvintpipe(udev, idesc->endpoint[0].desc.bEndpointAddress); - usb_fill_int_urb(ir->urb_in, udev, pipein, ir->buf_in, - MAX_PACKET_SIZE, iguanair_rx, ir, - idesc->endpoint[0].desc.bInterval); + usb_fill_int_urb(ir->urb_in, udev, pipein, ir->buf_in, MAX_PACKET_SIZE, + iguanair_rx, ir, 1); ir->urb_in->transfer_dma = ir->dma_in; ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; -- 1.7.11.2 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
