On 08/12/2012 09:33 PM, CrazyCat wrote:
Ok, done :) Look like DTV_DVBT2_PLP_ID not implemented for CXD2820r ?
yes, true. It uses always PLP 0. I didn't have signal source that uses
multiple PLPs. I didn't even add that PLP ID to API.
12.08.2012, 03:00, "Antti Palosaari" <crope@xxxxxx>:
We asked you to merge isdbs_ts_id, dvbt2_plp_id and dvbs2_mis_id to one
as those are logically same thing from the user-point of view.
Technically those differs, but that is userspace API so underlying
technique should not matter.
It is some more work for you, but it should not be such big issue you
cannot do. So please use few hours and merge all those. I think correct
name is DTV_STREAM_ID. So remove isdbs_ts_id, dvbt2_plp_id and
dvbs2_mis_id. Add new variable stream_id. As DTV_ISDBS_TS_ID and
DTV_DVBT2_PLP_ID already exists you should make some logic those could
be still used.
Signed-off-by: Evgeny Plehov <EvgenyPlehov@xxxxxxx>
diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h
index f50d405..32d51bc 100644
--- a/include/linux/dvb/frontend.h
+++ b/include/linux/dvb/frontend.h
@@ -62,6 +62,7 @@ typedef enum fe_caps {
FE_CAN_8VSB = 0x200000,
FE_CAN_16VSB = 0x400000,
FE_HAS_EXTENDED_CAPS = 0x800000, /* We need more bitspace for newer APIs, indicate this. */
+ FE_CAN_MULTISTREAM = 0x4000000, /* frontend supports DVB-S2 multistream filtering */
FE_CAN_TURBO_FEC = 0x8000000, /* frontend supports "turbo fec modulation" */
FE_CAN_2G_MODULATION = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */
FE_NEEDS_BENDING = 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */
@@ -314,9 +315,10 @@ struct dvb_frontend_event {
#define DTV_ISDBT_LAYER_ENABLED 41
-#define DTV_ISDBS_TS_ID 42
-
-#define DTV_DVBT2_PLP_ID 43
+#define DTV_STREAM_ID 42
+#define DTV_ISDBS_TS_ID DTV_STREAM_ID
+#define DTV_DVBT2_PLP_ID DTV_STREAM_ID
+#define DTV_DVBS2_MIS_ID DTV_STREAM_ID
Do not define command DTV_DVBS2_MIS_ID at all. It is not never released
thus no need to support.
I suspect DTV_DVBT2_PLP_ID is never used by any application, but still
it is not possible to change command number from 43 to 42 as this does.
I am not sure what kind of procedures are needed to remove existing API
command number, but surely it is not possible like that. So you have to
reserve command 43. Both commands 42 and 43 should continue working.
DTV_DVBT2_PLP_ID should be marked as deprecated and after that it could
be removed somewhere in future.
#define DTV_ENUM_DELSYS 44
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index aebcdf2..8fb7eac 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -946,8 +946,7 @@ static int dvb_frontend_clear_cache(struct dvb_frontend *fe)
c->layer[i].segment_count = 0;
}
- c->isdbs_ts_id = 0;
- c->dvbt2_plp_id = 0;
+ c->stream_id = -1;
You have defined it as a unsigned 32 thus -1 is not possible value.
Maybe 0 is still good default choice.
switch (c->delivery_system) {
case SYS_DVBS:
@@ -1017,8 +1016,7 @@ static struct dtv_cmds_h dtv_cmds[DTV_MAX_COMMAND + 1] = {
_DTV_CMD(DTV_ISDBT_LAYERC_SEGMENT_COUNT, 1, 0),
_DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING, 1, 0),
- _DTV_CMD(DTV_ISDBS_TS_ID, 1, 0),
- _DTV_CMD(DTV_DVBT2_PLP_ID, 1, 0),
DTV_DVBT2_PLP_ID cannot be removed yet (but DTV_ISDBS_TS_ID can be as it
is renamed, it is OK).
+ _DTV_CMD(DTV_STREAM_ID, 1, 0),
/* Get */
_DTV_CMD(DTV_DISEQC_SLAVE_REPLY, 0, 1),
@@ -1382,11 +1380,9 @@ static int dtv_property_process_get(struct dvb_frontend *fe,
case DTV_ISDBT_LAYERC_TIME_INTERLEAVING:
tvp->u.data = c->layer[2].interleaving;
break;
- case DTV_ISDBS_TS_ID:
- tvp->u.data = c->isdbs_ts_id;
- break;
- case DTV_DVBT2_PLP_ID:
- tvp->u.data = c->dvbt2_plp_id;
DTV_DVBT2_PLP_ID cannot be removed yet (but DTV_ISDBS_TS_ID can be as it
is renamed, it is OK).
+
+ case DTV_STREAM_ID:
+ tvp->u.data = c->stream_id;
break;
/* ATSC-MH */
@@ -1771,11 +1767,8 @@ static int dtv_property_process_set(struct dvb_frontend *fe,
case DTV_ISDBT_LAYERC_TIME_INTERLEAVING:
c->layer[2].interleaving = tvp->u.data;
break;
- case DTV_ISDBS_TS_ID:
- c->isdbs_ts_id = tvp->u.data;
- break;
- case DTV_DVBT2_PLP_ID:
- c->dvbt2_plp_id = tvp->u.data;
DTV_DVBT2_PLP_ID cannot be removed yet (but DTV_ISDBS_TS_ID can be as it
is renamed, it is OK).
+ case DTV_STREAM_ID:
+ c->stream_id = tvp->u.data;
break;
/* ATSC-MH */
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h
index 7c64c09..bec0cda 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.h
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.h
@@ -368,11 +368,8 @@ struct dtv_frontend_properties {
u8 interleaving;
} layer[3];
- /* ISDB-T specifics */
- u32 isdbs_ts_id;
-
- /* DVB-T2 specifics */
- u32 dvbt2_plp_id;
+ /* Multistream specifics */
+ u32 stream_id;
These are correct!
/* ATSC-MH specifics */
u8 atscmh_fic_ver;
diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c
index ea86a56..13caec0 100644
--- a/drivers/media/dvb/frontends/stv090x.c
+++ b/drivers/media/dvb/frontends/stv090x.c
@@ -3425,6 +3425,33 @@ err:
return -1;
}
+static int stv090x_set_mis(struct stv090x_state *state, int mis)
+{
+ u32 reg;
+
+ if (mis < 0 || mis > 255) {
+ dprintk(FE_DEBUG, 1, "Disable MIS filtering");
+ reg = STV090x_READ_DEMOD(state, PDELCTRL1);
+ STV090x_SETFIELD_Px(reg, FILTER_EN_FIELD, 0x00);
+ if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0)
+ goto err;
+ } else {
+ dprintk(FE_DEBUG, 1, "Enable MIS filtering - %d", mis);
+ reg = STV090x_READ_DEMOD(state, PDELCTRL1);
+ STV090x_SETFIELD_Px(reg, FILTER_EN_FIELD, 0x01);
+ if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0)
+ goto err;
+ if (STV090x_WRITE_DEMOD(state, ISIENTRY, mis) < 0)
+ goto err;
+ if (STV090x_WRITE_DEMOD(state, ISIBITENA, 0xff) < 0)
+ goto err;
+ }
+ return 0;
+err:
+ dprintk(FE_ERROR, 1, "I/O error");
+ return -1;
+}
+
static enum dvbfe_search stv090x_search(struct dvb_frontend *fe)
{
struct stv090x_state *state = fe->demodulator_priv;
@@ -3447,6 +3474,8 @@ static enum dvbfe_search stv090x_search(struct dvb_frontend *fe)
state->search_range = 5000000;
}
+ stv090x_set_mis(state, props->stream_id);
+
if (stv090x_algo(state) == STV090x_RANGEOK) {
dprintk(FE_DEBUG, 1, "Search success!");
return DVBFE_ALGO_SEARCH_SUCCESS;
@@ -4798,6 +4827,9 @@ struct dvb_frontend *stv090x_attach(const struct stv090x_config *config,
}
}
+ if (state->internal->dev_ver >= 0x30)
+ state->frontend.ops.info.caps |= FE_CAN_MULTISTREAM;
+
/* workaround for stuck DiSEqC output */
if (config->diseqc_envelope_mode)
stv090x_send_diseqc_burst(&state->frontend, SEC_MINI_A);
Only functional problem is here that it removes DTV_DVBT2_PLP_ID command
43 from the API whilst there could be some applications using that. It
should be deprecated (marked as do not use or like that) and then
removed in future.
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
