The following 2 patches add driver for S5K4ECGX sensor with embedded ISP SoC, and minor v4l2 control API enhancement. S5K4ECGX is 5M CMOS Image sensor from Samsung Changes since v3: - used request_firmware to configure initial settings - added parsing functions to read initial settings - updated regulator API - reduced preview setting tables by experiment Changes since v2: - added GPIO (reset/stby) and regulators - updated I2C read/write, based on s5k6aa datasheet - fixed set_fmt errors - reduced register tables a bit - removed vmalloc Changes since v1: - fixed s_stream(0) when it called twice - changed mutex_X position to be used when strictly necessary - add additional s_power(0) in case that error happens - update more accurate debugging statements - remove dummy else Sangwook Lee (2): v4l: Add factory register values form S5K4ECGX sensor v4l: Add v4l2 subdev driver for S5K4ECGX sensor drivers/media/video/Kconfig | 8 + drivers/media/video/Makefile | 1 + drivers/media/video/s5k4ecgx.c | 941 +++++++++++++++++++++++++++++++++++ drivers/media/video/s5k4ecgx_regs.h | 138 +++++ include/media/s5k4ecgx.h | 37 ++ 5 files changed, 1125 insertions(+) create mode 100644 drivers/media/video/s5k4ecgx.c create mode 100644 drivers/media/video/s5k4ecgx_regs.h create mode 100644 include/media/s5k4ecgx.h -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
