On Mon August 6 2012 10:17:39 Federico Vaga wrote:
> Signed-off-by: Federico Vaga <federico.vaga@xxxxxxxxx>
> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@xxxxxx>
>
> ---
> drivers/media/video/sta2x11_vip.c | 1239 +++++++++++++------------------------
> 1 file modificato, 414 inserzioni(+), 825 rimozioni(-)
>
> diff --git a/drivers/media/video/sta2x11_vip.c b/drivers/media/video/sta2x11_vip.c
> index 4c10205..ffd9f0a 100644
> --- a/drivers/media/video/sta2x11_vip.c
> +++ b/drivers/media/video/sta2x11_vip.c
> @@ -1186,25 +798,6 @@ static void vip_gpio_release(struct device *dev, int pin, const char *name)
> }
> }
>
> -/**
> - * sta2x11_vip_init_one - init one instance of video device
> - * @pdev: PCI device
> - * @ent: (not used)
> - *
> - * allocate reset pins for DAC.
> - * Reset video DAC, this is done via reset line.
> - * allocate memory for managing device
> - * request interrupt
> - * map IO region
> - * register device
> - * find and initialize video DAC
> - *
> - * return value: 0, no error
> - *
> - * -ENOMEM, no memory
> - *
> - * -ENODEV, device could not be detected or registered
> - */
> static int __devinit sta2x11_vip_init_one(struct pci_dev *pdev,
> const struct pci_device_id *ent)
> {
> @@ -1212,10 +805,17 @@ static int __devinit sta2x11_vip_init_one(struct pci_dev *pdev,
> struct sta2x11_vip *vip;
> struct vip_config *config;
>
> + /* Check if hardware support 26-bit DMA */
> + if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(26))) {
> + dev_err(&pdev->dev, "26-bit DMA addressing not available\n");
> + return -EINVAL;
> + }
> + /* Enable PCI */
> ret = pci_enable_device(pdev);
> if (ret)
> return ret;
>
> + /* Get VIP platform data */
> config = dev_get_platdata(&pdev->dev);
> if (!config) {
> dev_info(&pdev->dev, "VIP slot disabled\n");
> @@ -1223,6 +823,7 @@ static int __devinit sta2x11_vip_init_one(struct pci_dev *pdev,
> goto disable;
> }
>
> + /* Power configuration */
> ret = vip_gpio_reserve(&pdev->dev, config->pwr_pin, 0,
> config->pwr_name);
> if (ret)
> @@ -1237,7 +838,6 @@ static int __devinit sta2x11_vip_init_one(struct pci_dev *pdev,
> goto disable;
> }
> }
> -
> if (config->pwr_pin != -1) {
> /* Datasheet says 5ms between PWR and RST */
> usleep_range(5000, 25000);
> @@ -1251,17 +851,20 @@ static int __devinit sta2x11_vip_init_one(struct pci_dev *pdev,
> }
> usleep_range(5000, 25000);
>
> + /* Allocate a new VIP instance */
> vip = kzalloc(sizeof(struct sta2x11_vip), GFP_KERNEL);
> if (!vip) {
> ret = -ENOMEM;
> goto release_gpios;
> }
> -
> vip->pdev = pdev;
> vip->std = V4L2_STD_PAL;
> vip->format = formats_50[0];
> vip->config = config;
>
> + ret = sta2x11_vip_init_controls(vip);
> + if (ret)
> + goto free_mem;
> if (v4l2_device_register(&pdev->dev, &vip->v4l2_dev))
> goto free_mem;
>
> @@ -1271,46 +874,52 @@ static int __devinit sta2x11_vip_init_one(struct pci_dev *pdev,
>
> pci_set_master(pdev);
>
> - ret = pci_request_regions(pdev, DRV_NAME);
> + ret = pci_request_regions(pdev, KBUILD_MODNAME);
> if (ret)
> goto unreg;
>
> vip->iomem = pci_iomap(pdev, 0, 0x100);
> if (!vip->iomem) {
> - ret = -ENOMEM; /* FIXME */
> + ret = -ENOMEM;
> goto release;
> }
>
> pci_enable_msi(pdev);
>
> - INIT_LIST_HEAD(&vip->capture);
> + /* Initialize buffer */
> + ret = sta2x11_vip_init_buffer(vip);
> + if (ret)
> + goto unmap;
> +
> spin_lock_init(&vip->slock);
> - mutex_init(&vip->mutex);
> - vip->started = 0;
> - vip->disabled = 0;
>
> ret = request_irq(pdev->irq,
> (irq_handler_t) vip_irq,
> - IRQF_SHARED, DRV_NAME, vip);
> + IRQF_SHARED, KBUILD_MODNAME, vip);
> if (ret) {
> dev_err(&pdev->dev, "request_irq failed\n");
> ret = -ENODEV;
> - goto unmap;
> + goto release_buf;
> }
>
> + /* Alloc, initialize and register video device */
> vip->video_dev = video_device_alloc();
> if (!vip->video_dev) {
> ret = -ENOMEM;
> goto release_irq;
> }
>
> - *(vip->video_dev) = video_dev_template;
> + vip->video_dev = &video_dev_template;
> + vip->video_dev->v4l2_dev = &vip->v4l2_dev;
> + vip->video_dev->queue = &vip->vb_vidq;
> + vip->video_dev->flags |= V4L2_FL_USES_V4L2_FH | V4L2_FL_USE_FH_PRIO;
Been there, done that :-)
V4L2_FL_USE_FH_PRIO is a bit number, not a bit mask. Use set_bit instead:
set_bit(V4L2_FL_USE_FH_PRIO, &vip->video_dev->flags);
No need to set V4L2_FL_USES_V4L2_FH, BTW. That will be set automatically as soon
as v4l2_fh_open is called.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
