Hi Sakari, On Saturday 28 July 2012 00:27:23 Sakari Ailus wrote: > On Fri, Jul 27, 2012 at 01:02:04AM +0200, Laurent Pinchart wrote: > > On Thursday 26 July 2012 23:54:01 Sakari Ailus wrote: > > > On Tue, Jul 24, 2012 at 01:10:42AM +0200, Laurent Pinchart wrote: > > > > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > > > > --- > > > > > > > > drivers/media/video/mt9v032.c | 36 ++++++++++++++++++++++++++++--- > > > > 1 files changed, 33 insertions(+), 3 deletions(-) > > > > > > > > Changes since v1: > > > > > > > > - Make sure the total horizontal time will not go below 660 when > > > > setting the horizontal blanking control > > > > > > > > - Restrict the vertical blanking value to 3000 as documented in the > > > > datasheet. Increasing the exposure time actually extends vertical > > > > blanking, as long as the user doesn't forget to turn auto-exposure > > > > off... > > > > > > Does binning either horizontally or vertically affect the blanking > > > limits? If the process is analogue then the answer is typically "yes". > > > > The datasheet doesn't specify whether binning and blanking can influence > > each other. > > Vertical binning is often analogue since digital binning would require as > much temporary memory as the row holds pixels. This means the hardware > already does binning before a/d conversion and there's only need to actually > read half the number of rows, hence the effect on frame length. That will affect the frame length, but why would it affect vertical blanking ? > > > It's not directly related to this patch, but the effect of the driver > > > just exposing one sub-device really shows better now. Besides lacking > > > the way to specify binning as in the V4L2 subdev API (compose selection > > > target), the user also can't use the crop bounds selection target to get > > > the size of the pixel array. > > > > > > We could either accept this for the time being and fix it later on of > > > fix it now. > > > > > > I prefer fixing it right now but admit that this patch isn't breaking > > > anything, it rather is missing quite relevant functionality to control > > > the sensor in a generic way. > > > > I'd rather apply this patch first, as it doesn't break anything :-) Fixing > > the problem will require discussions, and that will take time. > > How so? There's nothing special in this sensor as far as I can see. > > > Binning/skipping is a pretty common feature in sensors. Exposing two sub- > > devices like the SMIA++ driver does is one way to fix the problem, but do > > we really want to do that for the vast majority of sensors ? > > If we want to expose the sensor's functionality using the V4L2 subdev API > and not a sensor specific API, the answer is "yes". The bottom line is that > we have just one API to configure scaling and cropping and that API > (selections) is the same independently of where the operation is being > performed; whether it's the sensor or the ISP. If we want to expose two subdevices for every sensor we will need to get both kernelspace (ISP drivers) and userspace ready for this. I'm not against the idea, but we need to plan it properly. -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
