Yan Seiner wrote:
I just recently changed my vidcap to a Hauppage . Now I get these
interlace-like artifacts:
http://seiner.com/cz/rtpictures/2012_07_25T14h20m46sZ_0.451651_44.090619_-123.126059.jpg
http://seiner.com/cz/rtpictures/2012_07_25T14h22m48sZ_0.224624_44.089669_-123.139100.jpg
cxx231x.h has the following line:
#define CX231XX_INTERLACED_DEFAULT 1
Is there some way to turn off interlacing with a parameter?
OOPS! hit send too soon, it seems. Here's the card info:
[ 487.640000] cx231xx #0: New device Hauppauge Hauppauge Device @ 480
Mbps (2040:c200) with 5 interfaces
[ 487.650000] cx231xx #0: registering interface 1
[ 487.650000] cx231xx #0: can't change interface 3 alt no. to 3: Max.
Pkt size = 0
[ 487.660000] cx231xx #0: can't change interface 4 alt no. to 1: Max.
Pkt size = 0
[ 487.670000] cx231xx #0: Identified as Hauppauge USB Live 2 (card=9)
[ 487.790000] cx231xx #0: cx231xx_dif_set_standard: setStandard to ffffffff
[ 487.800000] cx25840 0-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0)
[ 487.840000] cx25840 0-0044: Firmware download size changed to 16
bytes max length
[ 489.940000] cx25840 0-0044: loaded v4l-cx231xx-avcore-01.fw firmware
(16382 bytes)
[ 489.990000] cx231xx #0: cx231xx #0: v4l2 driver version 0.0.2
[ 490.020000] cx231xx #0: cx231xx_dif_set_standard: setStandard to ffffffff
[ 490.090000] cx231xx #0: video_mux : 0
[ 490.090000] cx231xx #0: do_mode_ctrl_overrides : 0xb000
[ 490.100000] cx231xx #0: do_mode_ctrl_overrides NTSC
[ 490.110000] cx231xx #0: cx231xx #0/0: registered device video0 [v4l2]
[ 490.120000] cx231xx #0: cx231xx #0/0: registered device vbi0
[ 490.130000] cx231xx #0: V4L2 device registered as video0 and vbi0
[ 490.130000] cx231xx #0: EndPoint Addr 0x8400, Alternate settings: 5
[ 490.140000] cx231xx #0: Alternate setting 0, max size= 512
[ 490.140000] cx231xx #0: Alternate setting 1, max size= 184
[ 490.150000] cx231xx #0: Alternate setting 2, max size= 728
[ 490.160000] cx231xx #0: Alternate setting 3, max size= 2892
[ 490.160000] cx231xx #0: Alternate setting 4, max size= 1800
[ 490.170000] cx231xx #0: EndPoint Addr 0x8500, Alternate settings: 2
[ 490.170000] cx231xx #0: Alternate setting 0, max size= 512
[ 490.180000] cx231xx #0: Alternate setting 1, max size= 512
[ 490.180000] cx231xx #0: EndPoint Addr 0x8600, Alternate settings: 2
[ 490.190000] cx231xx #0: Alternate setting 0, max size= 512
[ 490.200000] cx231xx #0: Alternate setting 1, max size= 576
--
Help us raise money for my kids' swim team!
http://www.facebook.com/RiverRoadKids4Kids
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
