> I have tuning problem for some analog channels with the Terratec Cinergy > XS 0ccd:0042. This card is unable to tune into some channels. > > I have another version of this hardware with the ID's 0ccd:005e. > Interestingly, this Hardware-Version tunes without any problems all > available channels. > > Some channels are not found, but this seems to be not really correlated > with the frequency, although many of the not found channels are at lower > frequencies (PAL-BG, channel-list is europe-west): > > 0ccd:005e 00cd:0042 > E6 (182.25 MHz): ??? E6 (182.25 MHz): no station > E7 (189.25 MHz): ??? E7 (189.25 MHz): no station > E8 (196.25 MHz): ??? E8 (196.25 MHz): no station > E9 (203.25 MHz): ??? E9 (203.25 MHz): no station > SE6 (140.25 MHz): ??? SE6 (140.25 MHz): no station > SE7 (147.25 MHz): ??? SE7 (147.25 MHz): no station > SE8 (154.25 MHz): ??? SE8 (154.25 MHz): no station > SE9 (161.25 MHz): ??? SE9 (161.25 MHz): no station > SE10 (168.25 MHz): ??? SE10 (168.25 MHz): no station > SE11 (231.25 MHz): ??? SE11 (231.25 MHz): no station > > For a complete station-list compare the scantv output attached below. > > According to > http://www.kernel.org/doc/Documentation/video4linux/CARDLIST.tuner I > created a parameter file for the proper tuner-setting: > > cat /etc/modprobe.d/tuner_xc2028.conf > tuner=71 > > But this does not solve the problem. > > The firmware I use is > -rw-r--r-- 1 root root 65K 11. Jul 21:17 /lib/firmware/xc3028-v27.fw > > The problem occurs both with Fedora 17 and Ubuntu 10.04. > > What could I try next? Any help is appreciated. Is the patch mentioned here http://article.gmane.org/gmane.linux.drivers.video-input-infrastructure/51169 http://article.gmane.org/gmane.linux.drivers.video-input-infrastructure/51170 addressing this issue? Regards -- Felix -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
