[PATCH 2/2] v4l: Add v4l2 subdev driver for S5K4ECGX sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This dirver implements preview mode of the S5K4ECGX sensor.
capture (snapshot) operation, face detection are missing now.

Following controls are supported:
contrast/saturation/birghtness/sharpness

Signed-off-by: Sangwook Lee <sangwook.lee@xxxxxxxxxx>
---
 drivers/media/video/Kconfig    |    7 +
 drivers/media/video/Makefile   |    1 +
 drivers/media/video/s5k4ecgx.c |  871 ++++++++++++++++++++++++++++++++++++++++
 include/media/s5k4ecgx.h       |   29 ++
 4 files changed, 908 insertions(+)
 create mode 100644 drivers/media/video/s5k4ecgx.c
 create mode 100644 include/media/s5k4ecgx.h

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 99937c9..45d7f99 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -559,6 +559,13 @@ config VIDEO_S5K6AA
 	  This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M
 	  camera sensor with an embedded SoC image signal processor.
 
+config VIDEO_S5K4ECGX
+        tristate "Samsung S5K4ECGX sensor support"
+        depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+        ---help---
+          This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M
+          camera sensor with an embedded SoC image signal processor.
+
 source "drivers/media/video/smiapp/Kconfig"
 
 comment "Flash devices"
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index d209de0..605bf35 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_VIDEO_SR030PC30)	+= sr030pc30.o
 obj-$(CONFIG_VIDEO_NOON010PC30)	+= noon010pc30.o
 obj-$(CONFIG_VIDEO_M5MOLS)	+= m5mols/
 obj-$(CONFIG_VIDEO_S5K6AA)	+= s5k6aa.o
+obj-$(CONFIG_VIDEO_S5K4ECGX)    += s5k4ecgx.o
 obj-$(CONFIG_VIDEO_SMIAPP)	+= smiapp/
 obj-$(CONFIG_VIDEO_ADP1653)	+= adp1653.o
 obj-$(CONFIG_VIDEO_AS3645A)	+= as3645a.o
diff --git a/drivers/media/video/s5k4ecgx.c b/drivers/media/video/s5k4ecgx.c
new file mode 100644
index 0000000..68a1977
--- /dev/null
+++ b/drivers/media/video/s5k4ecgx.c
@@ -0,0 +1,871 @@
+/*
+ * Driver for s5k4ecgx (5MP Camera) from SAMSUNG
+ * a quarter-inch optical format 1.4 micron 5 megapixel (Mp)
+ * CMOS image sensor, as reffering to s5k6aa.c
+ *
+ * Copyright (C) 2012, Linaro, Sangwook Lee <sangwook.lee@xxxxxxxxxx>
+ * Copyright (C) 2012, Insignal Co,. Ltd,  Homin Lee <suapapa@xxxxxxxxxxxxxx>
+ * Copyright (C) 2011, SAMSUNG ELECTRONICS
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+#include <media/media-entity.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-mediabus.h>
+#include <media/s5k4ecgx.h>
+
+#include "s5k4ecgx_regs.h"
+
+static int debug;
+module_param(debug, int, 0644);
+
+#define S5K4ECGX_DRIVER_NAME		"s5k4ecgx"
+
+/* Basic windows sizes */
+#define S5K4ECGX_OUT_WIDTH_DEF		640
+#define S5K4ECGX_OUT_HEIGHT_DEF		480
+#define S5K4ECGX_WIN_WIDTH_MAX		1024
+#define S5K4ECGX_WIN_HEIGHT_MAX		600
+#define S5K4ECGX_WIN_WIDTH_MIN		176
+#define S5K4ECGX_WIN_HEIGHT_MIN		144
+
+/* Firmware revision information */
+#define S5K4ECGX_REVISION_1_1		0x11
+#define S5K4ECGX_FW_VERSION		0x4EC0
+#define REG_FW_VERSION			0x700001A4
+#define REG_FW_REVISION			0x700001A6
+
+/* For now we use only one user configuration register set */
+#define S5K4ECGX_MAX_PRESETS		1
+
+/* Review this depending on system */
+#define S5K4ECGX_POLL_TIME		1 /* ms */
+
+/* General purpose parameters */
+#define REG_USER_BRIGHTNESS		0x7000022C /* Brigthness */
+#define REG_USER_CONTRAST		0x7000022E /* Contrast */
+#define REG_USER_SATURATION		0x70000230 /* Saturation */
+
+/* FIXME: No information availble about these register from the datasheet */
+#define REG_USER_SHARP1			0x70000A28
+#define REG_USER_SHARP2			0x70000ADE
+#define REG_USER_SHARP3			0x70000B94
+#define REG_USER_SHARP4			0x70000C4A
+#define REG_USER_SHARP5			0x70000D00
+
+#define LSB(X) (((X) & 0xFF))
+#define MSB(Y) (((Y) >> 8) & 0xFF)
+
+/*
+ * Preview size lists supported by sensor
+ */
+struct regval_list *pview_size[] = {
+	s5k4ecgx_176_preview,
+	s5k4ecgx_352_preview,
+	s5k4ecgx_640_preview,
+	s5k4ecgx_720_preview,
+};
+
+struct s5k4ecgx_framesize {
+	u32 idx; /* Should indicate index of pview_size */
+	u32 width;
+	u32 height;
+};
+
+/*
+ * TODO: currently only preview is supported and snapshopt(capture)
+ * is not implemented yet
+ */
+static struct s5k4ecgx_framesize p_sets[] = {
+	{0, 176, 144},
+	{1, 352, 288},
+	{2, 640, 480},
+	{3, 720, 480},
+};
+
+#define S5K4ECGX_NUM_PREV ARRAY_SIZE(p_sets)
+struct s5k4ecgx_pixfmt {
+	enum v4l2_mbus_pixelcode code;
+	u32 colorspace;
+};
+
+/* By defaut value, output from sensor will be YUV422 0-255 */
+static const struct s5k4ecgx_pixfmt s5k4ecgx_formats[] = {
+	{ V4L2_MBUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG},
+};
+
+struct s5k4ecgx_preset {
+		/* output pixel format and resolution */
+		struct v4l2_mbus_framefmt mbus_fmt;
+		u8 clk_id;
+		u8 index;
+};
+
+struct s5k4ecgx {
+	struct v4l2_subdev sd;
+	struct media_pad pad;
+	struct v4l2_ctrl_handler handler;
+
+	struct s5k4ecgx_platform_data *pdata;
+	struct s5k4ecgx_preset presets[S5K4ECGX_MAX_PRESETS];
+	struct s5k4ecgx_preset *preset;
+	struct s5k4ecgx_framesize *p_now;	/* Current frame size */
+	struct v4l2_fract timeperframe;
+
+       /* protects the struct members below */
+	struct mutex lock;
+	int streaming;
+
+	/* Token for I2C burst write */
+	enum token_type reg_type;
+	u16 reg_addr_high;
+	u16 reg_addr_low;
+
+	/* Platform specific field */
+	int (*set_power)(int);
+	int mdelay;
+};
+
+static inline struct s5k4ecgx *to_s5k4ecgx(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct s5k4ecgx, sd);
+}
+
+static int s5k4ecgx_write_i2c(struct i2c_client *client, u8 *data, u16 len)
+{
+	struct i2c_msg msg = {client->addr, 0, len, (u8 *)data};
+	int ret;
+
+	ret = i2c_transfer(client->adapter, &msg, 1);
+	mdelay(S5K4ECGX_POLL_TIME);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to write I2C err\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int s5k4ecgx_write32(struct i2c_client *client,
+				       u16 addr, u16 data)
+{
+	u8 buf[4];
+
+	buf[0] = MSB(addr); /* SWAP 16 bit */
+	buf[1] = LSB(addr);
+	buf[2] = MSB(data);
+	buf[3] = LSB(data);
+
+	return s5k4ecgx_write_i2c(client, buf, 4);
+}
+
+static int s5k4ecgx_read_setup(struct v4l2_subdev *sd, u32 addr)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
+	u16 high = addr >> 16, low =  addr & 0xFFFF;
+	int ret = 0;
+
+	if (priv->reg_type != TOK_READ) {
+		priv->reg_addr_high = 0;
+		priv->reg_type = TOK_READ;
+	}
+	if (priv->reg_addr_high != high) {
+		ret = s5k4ecgx_write32(client, 0x002C, high);
+		priv->reg_addr_high = high;
+	}
+	ret |= s5k4ecgx_write32(client, 0x002E, low);
+
+	return ret;
+}
+
+static int s5k4ecgx_read16(struct i2c_client *client, u16 *val)
+{
+	struct i2c_msg msg[2];
+	u16 subaddr = 0x0F12;
+	u8 buf[2];
+	int err;
+
+	subaddr = swab16(subaddr);
+
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].len = 2;
+	msg[0].buf = (u8 *)&subaddr;
+
+	msg[1].addr = client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = 2;
+	msg[1].buf = buf;
+
+	err = i2c_transfer(client->adapter, msg, 2);
+	if (unlikely(err != 2)) {
+		dev_err(&client->dev, "Failed to read register 0x%02x!\n",
+			subaddr);
+		return -EIO;
+	}
+
+	*val = ((buf[0] << 8) | buf[1]);
+
+	return 0;
+}
+
+/*
+ * Access address will be remapped inside sensor (ARM7 core)
+ */
+static int s5k4ecgx_write_setup(struct v4l2_subdev *sd, u16 high, u16 low)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
+	int ret = 0;
+
+	if (priv->reg_type != TOK_WRITE) {
+		priv->reg_addr_high = 0;
+		priv->reg_addr_low = 0;
+		priv->reg_type = TOK_WRITE;
+	}
+
+	/* FIXME: no information about 0x0028 in the datasheet */
+	if (priv->reg_addr_high != high) {
+		ret = s5k4ecgx_write32(client, 0x0028, high);
+		priv->reg_addr_high = high;
+		priv->reg_addr_low = 0;
+	}
+
+	/* FIXME: no information about 0x002A in the datasheet */
+	if (priv->reg_addr_low != low) {
+		ret |= s5k4ecgx_write32(client, 0x002A, low);
+		priv->reg_addr_low = low;
+	}
+
+	return ret;
+}
+
+static int s5k4ecgx_write_ctrl(struct v4l2_subdev *sd, u32 addr, u16 data)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int ret;
+
+	v4l2_dbg(1, debug, sd, "Ctrl register val 0x%4x\n", data);
+	s5k4ecgx_write_setup(sd, addr >> 16, addr & 0xffff);
+	ret = s5k4ecgx_write32(client, 0x0F12, data);
+
+	return ret;
+}
+
+static u8 *s5k4ecgx_prep_buffer(int *cnt, struct regval_list **pos)
+{
+	struct regval_list *p_cur = *pos;
+	int burst_len = 0, len;
+	u8 *p_buf;
+
+	while (p_cur->type != TOK_TERM) {
+		/*
+		 * Make sure two bytes data are used and address is continous
+		 * to write them in a block
+		 */
+		burst_len += 2;
+		if (TOK_WRITE != (p_cur + 1)->type)
+			break;
+		if ((p_cur->addr + 2) != (p_cur + 1)->addr)
+			break;
+		p_cur += 1;
+	}
+	p_buf = vmalloc(burst_len + 2);
+	if (!p_buf)
+		return NULL;
+
+	p_buf[0] = 0x0F; /* FIXME: no information in the datasheet */
+	p_buf[1] = 0x12;
+	p_cur = *pos;
+	len = 2;
+	burst_len += 2; /* Add two bytes */
+	while (1) {
+		p_buf[len] = MSB(p_cur->val);
+		p_buf[len + 1] = LSB(p_cur->val);
+		len += 2;
+		if (len < burst_len)
+			p_cur++;
+		else
+			break;
+	}
+	*pos = p_cur;
+	*cnt = burst_len ;
+
+	return p_buf;
+}
+
+static int s5k4ecgx_write_burst(struct v4l2_subdev *sd,
+					struct regval_list **pos)
+{
+	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct regval_list *p_cur = *pos;
+	int burst_len, ret = 0;
+	u8 *p_buf;
+
+	/* Select starting address of burst data */
+	s5k4ecgx_write_setup(sd, p_cur->addr >> 16, p_cur->addr & 0xffff);
+
+	/* Make buffer and then copy data into it */
+	p_buf = s5k4ecgx_prep_buffer(&burst_len, pos);
+	if (!p_buf)
+		return -ENOMEM;
+	ret = s5k4ecgx_write_i2c(client, p_buf, burst_len);
+	vfree(p_buf);
+	priv->reg_addr_low = 0;
+
+	return ret;
+}
+
+static int s5k4ecgx_write_array(struct v4l2_subdev *sd,
+					struct regval_list *vals)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int err = 0;
+
+	while (vals->type != TOK_TERM && !err) {
+		switch (vals->type) {
+		case TOK_WRITE:
+			/*
+			 * This function continues to check the
+			 * following addresses, then update the address of vals
+			 */
+			err = s5k4ecgx_write_burst(sd, &vals);
+			break;
+		case TOK_CMD:
+			err = s5k4ecgx_write32(client, vals->addr, vals->val);
+			break;
+		case TOK_DELAY:
+			msleep(vals->val);
+			break;
+		default:
+			v4l2_err(sd, "Failed to detect i2c type!\n");
+			err = -EINVAL;
+			break;
+		}
+		vals++;
+	}
+
+	if (unlikely(vals->type != TOK_TERM) || err)
+		v4l2_err(sd, "Failed to write array!\n");
+
+	return err;
+}
+
+static void s5k4ecgx_init_parameters(struct v4l2_subdev *sd)
+{
+	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
+	int err = 0;
+
+	priv->streaming = 0;
+	/* brigthness default */
+	err = s5k4ecgx_write_array(sd, s5k4ecgx_ev_default);
+	/* no image effect */
+	err |= s5k4ecgx_write_array(sd, s5k4ecgx_effect_normal);
+	/* white blance auto */
+	err |= s5k4ecgx_write_array(sd, s5k4ecgx_wb_auto);
+	err |= s5k4ecgx_write_array(sd, s5k4ecgx_contrast_default);
+	err |= s5k4ecgx_write_array(sd, s5k4ecgx_iso_auto);
+	/* default 30 FPS */
+	err |= s5k4ecgx_write_array(sd, s5k4ecgx_fps_30);
+	err |= s5k4ecgx_write_array(sd, s5k4ecgx_scene_default);
+	err |= s5k4ecgx_write_array(sd, s5k4ecgx_saturation_default);
+	err |= s5k4ecgx_write_array(sd, s5k4ecgx_sharpness_default);
+
+	if (err)
+		v4l2_err(sd, "Failed to write init params!\n");
+}
+
+static void s5k4ecgx_set_framesize(struct v4l2_subdev *sd,
+					struct v4l2_mbus_framefmt *in)
+{
+	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
+	struct s5k4ecgx_framesize *a = p_sets;
+	struct s5k4ecgx_framesize *z = p_sets + S5K4ECGX_NUM_PREV - 1;
+
+	/* If not match, assign the biggest size  */
+	while (a != z) {
+		if (a->width == in->width && a->height == in->height)
+			break;
+		a++;
+	}
+	priv->p_now = a;
+}
+
+static int s5k4ecgx_get_pixfmt_index(struct s5k4ecgx *priv,
+				   struct v4l2_mbus_framefmt *mf)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(s5k4ecgx_formats); i++)
+		if (mf->colorspace == s5k4ecgx_formats[i].colorspace &&
+		    mf->code == s5k4ecgx_formats[i].code)
+			return i;
+
+	return 0;
+}
+
+static void s5k4ecgx_try_fmt(struct s5k4ecgx *priv,
+			     struct v4l2_mbus_framefmt *mf)
+{
+	unsigned int index;
+
+	v4l_bound_align_image(&mf->width, S5K4ECGX_WIN_WIDTH_MIN,
+			S5K4ECGX_WIN_WIDTH_MAX, 1, &mf->height,
+			S5K4ECGX_WIN_HEIGHT_MIN, S5K4ECGX_WIN_HEIGHT_MAX, 1, 0);
+
+	if (mf->colorspace != V4L2_COLORSPACE_JPEG)
+		mf->colorspace = V4L2_COLORSPACE_JPEG;
+	index = s5k4ecgx_get_pixfmt_index(priv, mf);
+	mf->colorspace	= s5k4ecgx_formats[0].colorspace;
+	mf->code		= s5k4ecgx_formats[0].code;
+	mf->field		= V4L2_FIELD_NONE;
+}
+
+static int s5k4ecgx_read_fw_ver(struct v4l2_subdev *sd)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	u16 fw_ver = 0, hw_rev = 0;
+
+	s5k4ecgx_read_setup(sd, REG_FW_VERSION);
+	s5k4ecgx_read16(client, &fw_ver);
+	if (fw_ver != S5K4ECGX_FW_VERSION) {
+		v4l2_err(sd, "FW version check failed!");
+		return -ENODEV;
+	}
+	s5k4ecgx_read_setup(sd, REG_FW_REVISION);
+	s5k4ecgx_read16(client, &hw_rev);
+
+	if (hw_rev == S5K4ECGX_REVISION_1_1) {
+		v4l2_info(sd, "chip found FW ver: 0x%X, HW rev: 0x%X\n",
+						fw_ver, hw_rev);
+	} else {
+		v4l2_err(sd, "chip found but it has unknown revision 0x%x\n",
+							hw_rev);
+		return -ENODEV;
+	};
+
+	return 0;
+}
+
+static int s5k4ecgx_enum_mbus_code(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_fh *fh,
+				   struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (code->index >= ARRAY_SIZE(s5k4ecgx_formats))
+		return -EINVAL;
+	code->code = s5k4ecgx_formats[code->index].code;
+
+	return 0;
+}
+
+static int s5k4ecgx_enum_frame_size(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_fh *fh,
+				  struct v4l2_subdev_frame_size_enum *fse)
+{
+	int i = ARRAY_SIZE(s5k4ecgx_formats);
+
+	if (fse->index > 0)
+		return -EINVAL;
+
+	while (--i)
+		if (fse->code == s5k4ecgx_formats[i].code)
+			break;
+
+	fse->code = s5k4ecgx_formats[i].code;
+	fse->min_width	= S5K4ECGX_WIN_WIDTH_MIN;
+	fse->max_width	= S5K4ECGX_WIN_WIDTH_MAX;
+	fse->max_height = S5K4ECGX_WIN_HEIGHT_MIN;
+	fse->min_height = S5K4ECGX_WIN_HEIGHT_MAX;
+
+	return 0;
+}
+
+static int s5k4ecgx_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			    struct v4l2_subdev_format *fmt)
+{
+	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
+	struct v4l2_mbus_framefmt *mf;
+
+	memset(fmt->reserved, 0, sizeof(fmt->reserved));
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+		mf = v4l2_subdev_get_try_format(fh, 0);
+		fmt->format = *mf;
+		return 0;
+	}
+	mutex_lock(&priv->lock);
+	fmt->format.width = priv->p_now->width;
+	fmt->format.height = priv->p_now->height;
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
+static int s5k4ecgx_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			    struct v4l2_subdev_format *fmt)
+{
+	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
+	struct s5k4ecgx_preset *preset = priv->preset;
+	struct v4l2_mbus_framefmt *mf;
+	struct v4l2_rect *crop;
+	int ret = 0;
+
+	mutex_lock(&priv->lock);
+	s5k4ecgx_try_fmt(priv, &fmt->format);
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+		mf = v4l2_subdev_get_try_format(fh, fmt->pad);
+		crop = v4l2_subdev_get_try_crop(fh, 0);
+	} else {
+		if (priv->streaming)
+			ret = -EBUSY;
+		else
+			mf = &preset->mbus_fmt;
+	}
+	if (ret == 0) {
+		*mf = fmt->format;
+		s5k4ecgx_set_framesize(sd, &fmt->format);
+	}
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static const struct v4l2_subdev_pad_ops s5k4ecgx_pad_ops = {
+	.enum_mbus_code		= s5k4ecgx_enum_mbus_code,
+	.enum_frame_size	= s5k4ecgx_enum_frame_size,
+	.get_fmt	= s5k4ecgx_get_fmt,
+	.set_fmt	= s5k4ecgx_set_fmt,
+};
+
+/*
+ * V4L2 subdev controls
+ */
+static int s5k4ecgx_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+
+	struct v4l2_subdev *sd = &container_of(ctrl->handler, struct s5k4ecgx,
+						handler)->sd;
+	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
+	int err = 0;
+
+	v4l2_dbg(1, debug, sd, "ctrl: 0x%x, value: %d\n", ctrl->id, ctrl->val);
+	mutex_lock(&priv->lock);
+
+	switch (ctrl->id) {
+	case V4L2_CID_CONTRAST:
+		err = s5k4ecgx_write_ctrl(sd, REG_USER_CONTRAST, ctrl->val);
+		break;
+
+	case V4L2_CID_SATURATION:
+		err = s5k4ecgx_write_ctrl(sd, REG_USER_SATURATION, ctrl->val);
+		break;
+
+	case V4L2_CID_SHARPNESS:
+		err |= s5k4ecgx_write_ctrl(sd, REG_USER_SHARP1, ctrl->val);
+		err |= s5k4ecgx_write_ctrl(sd, REG_USER_SHARP2, ctrl->val);
+		err |= s5k4ecgx_write_ctrl(sd, REG_USER_SHARP3, ctrl->val);
+		err |= s5k4ecgx_write_ctrl(sd, REG_USER_SHARP4, ctrl->val);
+		err |= s5k4ecgx_write_ctrl(sd, REG_USER_SHARP5, ctrl->val);
+		break;
+
+	case V4L2_CID_BRIGHTNESS:
+		err = s5k4ecgx_write_ctrl(sd, REG_USER_BRIGHTNESS, ctrl->val);
+		break;
+	default:
+		v4l2_dbg(1, debug, sd, "unknown set ctrl id 0x%x\n", ctrl->id);
+		err = -ENOIOCTLCMD;
+		break;
+	}
+
+	/* Review this */
+	priv->reg_type = TOK_TERM;
+
+	if (err < 0)
+		v4l2_err(sd, "Failed to write videoc_s_ctrl err %d\n", err);
+	mutex_unlock(&priv->lock);
+
+	return err;
+}
+
+static const struct v4l2_ctrl_ops s5k4ecgx_ctrl_ops = {
+	.s_ctrl = s5k4ecgx_s_ctrl,
+};
+
+/*
+ * Reading s5k4ecgx version information
+ */
+static int s5k4ecgx_registered(struct v4l2_subdev *sd)
+{
+	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
+	int ret;
+
+	if (!priv->set_power) {
+		v4l2_err(sd, "Failed to call power-up function!\n");
+		return -EIO;
+	}
+
+	mutex_lock(&priv->lock);
+	priv->set_power(true);
+	/* Time to stablize sensor */
+	mdelay(priv->mdelay);
+	ret = s5k4ecgx_read_fw_ver(sd);
+	priv->set_power(false);
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+/*
+ *  V4L2 subdev internal operations
+ */
+static int s5k4ecgx_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+
+	struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0);
+	struct v4l2_rect *crop = v4l2_subdev_get_try_crop(fh, 0);
+
+	format->colorspace = s5k4ecgx_formats[0].colorspace;
+	format->code = s5k4ecgx_formats[0].code;
+	format->width = S5K4ECGX_OUT_WIDTH_DEF;
+	format->height = S5K4ECGX_OUT_HEIGHT_DEF;
+	format->field = V4L2_FIELD_NONE;
+
+	crop->width = S5K4ECGX_WIN_WIDTH_MAX;
+	crop->height = S5K4ECGX_WIN_HEIGHT_MAX;
+	crop->left = 0;
+	crop->top = 0;
+
+	return 0;
+}
+
+
+static const struct v4l2_subdev_internal_ops s5k4ecgx_subdev_internal_ops = {
+	.registered = s5k4ecgx_registered,
+	.open = s5k4ecgx_open,
+};
+
+static int s5k4ecgx_s_power(struct v4l2_subdev *sd, int val)
+{
+	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
+
+	if (!priv->set_power)
+		return -EIO;
+
+	v4l2_dbg(1, debug, sd, "Switching %s\n", val ? "on" : "off");
+
+	if (val) {
+		priv->set_power(val);
+		/* Time to stablize sensor */
+		mdelay(priv->mdelay);
+		/* Loading firmware into ARM7 core of sensor */
+		if (s5k4ecgx_write_array(sd, s5k4ecgx_init_regs) < 0)
+			return -EIO;
+		s5k4ecgx_init_parameters(sd);
+	} else {
+		priv->set_power(val);
+	}
+
+	return 0;
+}
+
+static int s5k4ecgx_log_status(struct v4l2_subdev *sd)
+{
+	v4l2_ctrl_handler_log_status(sd->ctrl_handler, sd->name);
+
+	return 0;
+}
+
+static const struct v4l2_subdev_core_ops s5k4ecgx_core_ops = {
+	.s_power = s5k4ecgx_s_power,
+	.log_status	= s5k4ecgx_log_status,
+};
+
+static int __s5k4ecgx_s_stream(struct v4l2_subdev *sd, int on)
+{
+	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
+	int err = 0;
+
+	if (on)
+		err = s5k4ecgx_write_array(sd, pview_size[priv->p_now->idx]);
+
+	return err;
+}
+
+static int s5k4ecgx_s_stream(struct v4l2_subdev *sd, int on)
+{
+	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
+	int ret = 0;
+
+	v4l2_dbg(1, debug, sd, "Turn streaming %s\n", on ? "on" : "off");
+	mutex_lock(&priv->lock);
+	if (on && !priv->streaming)
+		ret = __s5k4ecgx_s_stream(sd, on);
+	else
+		priv->streaming = 0;
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static const struct v4l2_subdev_video_ops s5k4ecgx_video_ops = {
+	.s_stream = s5k4ecgx_s_stream,
+};
+
+static const struct v4l2_subdev_ops s5k4ecgx_ops = {
+	.core = &s5k4ecgx_core_ops,
+	.pad = &s5k4ecgx_pad_ops,
+	.video = &s5k4ecgx_video_ops,
+};
+
+static int s5k4ecgx_initialize_ctrls(struct s5k4ecgx *priv)
+{
+	const struct v4l2_ctrl_ops *ops = &s5k4ecgx_ctrl_ops;
+	struct v4l2_ctrl_handler *hdl = &priv->handler;
+	int ret;
+
+	ret =  v4l2_ctrl_handler_init(hdl, 16);
+	if (ret)
+		return ret;
+
+	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -208, 127, 1, 0);
+	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -127, 127, 1, 0);
+	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, -127, 127, 1, 0);
+
+	/* For sharpness, 0x6024 is default value */
+	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS, -32704, 24612, 8208,
+			  24612);
+	if (hdl->error) {
+		ret = hdl->error;
+		v4l2_ctrl_handler_free(hdl);
+		return ret;
+	}
+	priv->sd.ctrl_handler = hdl;
+
+	return 0;
+};
+
+/*
+ * Set initial values for all preview presets
+ */
+static void s5k4ecgx_presets_data_init(struct s5k4ecgx *priv)
+{
+	struct s5k4ecgx_preset *preset = &priv->presets[0];
+	int i;
+
+	for (i = 0; i < S5K4ECGX_MAX_PRESETS; i++) {
+		preset->mbus_fmt.width	= S5K4ECGX_OUT_WIDTH_DEF;
+		preset->mbus_fmt.height	= S5K4ECGX_OUT_HEIGHT_DEF;
+		preset->mbus_fmt.code	= s5k4ecgx_formats[0].code;
+		preset->index		= i;
+		preset->clk_id		= 0;
+		preset++;
+	}
+	priv->preset = &priv->presets[0];
+}
+
+/*
+  * Fetching platform data is being done with s_config subdev call.
+  * In probe routine, we just register subdev device
+  */
+static int s5k4ecgx_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct v4l2_subdev *sd;
+	struct s5k4ecgx *priv;
+	struct s5k4ecgx_platform_data *pdata = client->dev.platform_data;
+	int	ret;
+
+	if (pdata == NULL) {
+		dev_err(&client->dev, "platform data is missing!\n");
+		return -EINVAL;
+	}
+	priv = kzalloc(sizeof(struct s5k4ecgx), GFP_KERNEL);
+
+	if (!priv)
+		return -ENOMEM;
+
+	mutex_init(&priv->lock);
+
+	priv->set_power = pdata->set_power;
+	priv->mdelay = pdata->mdelay;
+
+	sd = &priv->sd;
+	/* Registering subdev */
+	v4l2_i2c_subdev_init(sd, client, &s5k4ecgx_ops);
+	strlcpy(sd->name, S5K4ECGX_DRIVER_NAME, sizeof(sd->name));
+
+	sd->internal_ops = &s5k4ecgx_subdev_internal_ops;
+	/* Support v4l2 sub-device userspace API */
+	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+	priv->pad.flags = MEDIA_PAD_FL_SOURCE;
+	sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
+	ret = media_entity_init(&sd->entity, 1, &priv->pad, 0);
+	if (ret)
+		goto out_err;
+
+	ret = s5k4ecgx_initialize_ctrls(priv);
+	s5k4ecgx_presets_data_init(priv);
+
+	if (ret)
+		goto out_err;
+	else
+		return 0;
+
+ out_err:
+	media_entity_cleanup(&priv->sd.entity);
+	kfree(priv);
+
+	return ret;
+}
+
+static int s5k4ecgx_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
+
+	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(&priv->handler);
+	media_entity_cleanup(&sd->entity);
+	mutex_destroy(&priv->lock);
+	kfree(priv);
+
+	return 0;
+}
+
+static const struct i2c_device_id s5k4ecgx_id[] = {
+	{ S5K4ECGX_DRIVER_NAME, 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, s5k4ecgx_id);
+
+static struct i2c_driver v4l2_i2c_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name = S5K4ECGX_DRIVER_NAME,
+	},
+	.probe = s5k4ecgx_probe,
+	.remove = s5k4ecgx_remove,
+	.id_table = s5k4ecgx_id,
+};
+
+module_i2c_driver(v4l2_i2c_driver);
+
+MODULE_DESCRIPTION("Samsung S5K4ECGX 5MP SOC camera");
+MODULE_AUTHOR("Sangwook Lee <sangwook.lee@xxxxxxxxxx>");
+MODULE_AUTHOR("Seok-Young Jang <quartz.jang@xxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
diff --git a/include/media/s5k4ecgx.h b/include/media/s5k4ecgx.h
new file mode 100644
index 0000000..e041761
--- /dev/null
+++ b/include/media/s5k4ecgx.h
@@ -0,0 +1,29 @@
+/*
+ * S5K4ECGX Platform data header
+ *
+ * Copyright (C) 2012, Linaro
+ *
+ * Copyright (C) 2010, SAMSUNG ELECTRONICS
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef S5K4ECGX_H
+#define S5K4ECGX_H
+
+/**
+ * struct ss5k4ecgx_platform_data- s5k4ecgx driver platform data
+ * @set_power: an callback to give the chance to turn off/on
+ *		 camera which is depending on the board code
+ * @mdelay   : delay (ms) needed after enabling power
+ */
+
+struct s5k4ecgx_platform_data {
+	int (*set_power)(int);
+	int mdelay;
+};
+
+#endif /* S5K4ECGX_H */
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux