On Fri, 25 May 2012, Sylwester Nawrocki wrote:
> Add parsing of 'sensor' nodes specified as 'camera' child nodes.
> Each 'sensor' node should contain a phandle indicating sensor I2C
> client device. Sensors with SPI control bus are not yet supported.
>
> Additionally it is required that the I2C client node (child node
> of I2C bus controller node) contains 'clock-frequency' and
> 'video-bus-type' properties. These properties allow the host
> controller to switch to proper video bus and set proper master
> clock frequency for a sensor.
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> ---
>
> We might need something like this as a V4L2 core function.
> But I wanted to have something settled first until proposing
> any addtions to the V4L2 core modules.
> ---
> .../bindings/camera/soc/samsung-fimc.txt | 22 ++++
> drivers/media/video/s5p-fimc/fimc-mdevice.c | 114 +++++++++++++++++++-
> 2 files changed, 133 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/camera/soc/samsung-fimc.txt b/Documentation/devicetree/bindings/camera/soc/samsung-fimc.txt
> index b459da2..ffe09ac 100644
> --- a/Documentation/devicetree/bindings/camera/soc/samsung-fimc.txt
> +++ b/Documentation/devicetree/bindings/camera/soc/samsung-fimc.txt
> @@ -54,6 +54,28 @@ Required properties:
> - cell-index : FIMC-LITE IP instance index;
>
>
> +The 'sensor' nodes
> +------------------
> +
> +Required properties:
> +
> + - i2c-client : a phandle to an image sensor I2C client device;
> +
> +Optional properties:
> +
> +- samsung,camif-mux-id : FIMC video multiplexer input index; for camera
> + port A, B, C the indexes are 0, 1, 0 respectively.
> + If this property is not specified a default 0
> + value will be used by driver.
Isn't it possible to have several clients connected to different mux
inputs and switch between them at run-time? Even if only one of them can
be active at any time? That's why I've introduced link nodes in my RFC to
specify exactly which pads are connected.
> +
> +- samsung,fimc-camclk-id : the SoC CAM_MCLK clock output index. These clocks
> + are master clocks for external image processors.
> + If this property is not specified a default 0 value
> + will be used by driver.
> +
> + "video-bus-type" and "clock-frequency" properties must be specified at the
> + node referenced by 'i2c-client' phandle.
> +
> Example:
>
> fimc0: fimc@11800000 {
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
