Hi Laurent,
Thanks for the patch.
Laurent Pinchart wrote:
> Rearrange the CFA interpolation coefficients table based on the Bayer
> pattern. Support for non-Bayer CFA patterns is dropped as they were not
> correctly supported, and have never been tested.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/video/omap3isp/isppreview.c | 134 ++++++++++++++++++-----------
> drivers/media/video/omap3isp/isppreview.h | 1 +
> 2 files changed, 85 insertions(+), 50 deletions(-)
>
> diff --git a/drivers/media/video/omap3isp/isppreview.c b/drivers/media/video/omap3isp/isppreview.c
> index 71ce0f4..475908b 100644
> --- a/drivers/media/video/omap3isp/isppreview.c
> +++ b/drivers/media/video/omap3isp/isppreview.c
> @@ -236,20 +236,30 @@ static void preview_enable_hmed(struct isp_prev_device *prev, bool enable)
> ISPPRV_PCR_HMEDEN);
> }
>
> +#define OMAP3ISP_PREV_CFA_BLK_SIZE (OMAP3ISP_PREV_CFA_TBL_SIZE / 4)
> +
> /*
> - * preview_config_cfa - Configure CFA Interpolation
> - */
> -static void
> -preview_config_cfa(struct isp_prev_device *prev,
> - const struct prev_params *params)
> -{
> - struct isp_device *isp = to_isp_device(prev);
> + * preview_config_cfa - Configure CFA Interpolation for Bayer formats
> + *
> + * The CFA table is organised in four blocks, one per Bayer component. The
> + * hardware expects blocks to follow the Bayer order of the input data, while
> + * the driver stores the table in GRBG order in memory. The blocks need to be
> + * reordered to support non-GRBG Bayer patterns.
> + */
> +static void preview_config_cfa(struct isp_prev_device *prev,
> + const struct prev_params *params)
> +{
> + static const unsigned int cfa_coef_order[4][4] = {
> + { 0, 1, 2, 3 }, /* GRBG */
> + { 1, 0, 3, 2 }, /* RGGB */
> + { 2, 3, 0, 1 }, /* BGGR */
> + { 3, 2, 1, 0 }, /* GBRG */
> + };
> + const unsigned int *order = cfa_coef_order[prev->params.cfa_order];
> const struct omap3isp_prev_cfa *cfa = ¶ms->cfa;
> + struct isp_device *isp = to_isp_device(prev);
> unsigned int i;
> -
> - isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
> - ISPPRV_PCR_CFAFMT_MASK,
> - cfa->format << ISPPRV_PCR_CFAFMT_SHIFT);
> + unsigned int j;
>
> isp_reg_writel(isp,
> (cfa->gradthrs_vert << ISPPRV_CFA_GRADTH_VER_SHIFT) |
> @@ -259,9 +269,13 @@ preview_config_cfa(struct isp_prev_device *prev,
> isp_reg_writel(isp, ISPPRV_CFA_TABLE_ADDR,
> OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
>
> - for (i = 0; i < OMAP3ISP_PREV_CFA_TBL_SIZE; i++) {
> - isp_reg_writel(isp, cfa->table[i],
> - OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA);
> + for (i = 0; i < 4; ++i) {
> + const __u32 *block = cfa->table
> + + order[i] * OMAP3ISP_PREV_CFA_BLK_SIZE;
> +
> + for (j = 0; j < OMAP3ISP_PREV_CFA_BLK_SIZE; ++j)
> + isp_reg_writel(isp, block[j], OMAP3_ISP_IOMEM_PREV,
> + ISPPRV_SET_TBL_DATA);
> }
> }
>
I think struct omap3isp_prev_cfa would benefit from more detailed
definition of the gamma table. That would also change the API albeit not
ABI... unless you use an anonymous union which then requires a GCC newer
than or equal to 4.4, I think.
The table should be two-dimensional array, not one-dimensional.
Now that we're making changes to the user space API anyway, what would
you think about this? I think it'd make the code much nicer.
Kind regards,
--
Sakari Ailus
sakari.ailus@xxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
