Hi Javier,
Thanks for the patch.
On Wednesday 11 July 2012 09:56:49 Javier Martin wrote:
> Remove MX2_CAMERA_SWAP16 and MX2_CAMERA_PACK_DIR_MSB flags
> so that the driver can negotiate with the attached sensor
> whether the mbus format needs convertion from UYUV to YUYV
> or not.
The commit message doesn't really match the content of the patch anymore, as
you don't remove the MX2_CAMERA_SWAP16 and MX2_CAMERA_PACK_DIR_MSB flags but
just stop using them.
Could you please fix the commit message, and submit a patch that removes the
flag from arch/arm/plat-mxc/include/mach/mx2_cam.h for v3.6 ?
Please don't forget to add your SoB line.
> ---
> drivers/media/video/mx2_camera.c | 28 +++++++++++++++++++++++-----
> 1 file changed, 23 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/media/video/mx2_camera.c
> b/drivers/media/video/mx2_camera.c index 11a9353..0f01e7b 100644
> --- a/drivers/media/video/mx2_camera.c
> +++ b/drivers/media/video/mx2_camera.c
> @@ -118,6 +118,8 @@
> #define CSISR_ECC_INT (1 << 1)
> #define CSISR_DRDY (1 << 0)
>
> +#define CSICR1_FMT_MASK (CSICR1_PACK_DIR | CSICR1_SWAP16_EN)
> +
> #define CSICR1 0x00
> #define CSICR2 0x04
> #define CSISR (cpu_is_mx27() ? 0x08 : 0x18)
> @@ -230,6 +232,7 @@ struct mx2_prp_cfg {
> u32 src_pixel;
> u32 ch1_pixel;
> u32 irq_flags;
> + u32 csicr1;
> };
>
> /* prp resizing parameters */
> @@ -330,6 +333,7 @@ static struct mx2_fmt_cfg mx27_emma_prp_table[] = {
> .ch1_pixel = 0x2ca00565, /* RGB565 */
> .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH1WERR |
> PRP_INTR_CH1FC | PRP_INTR_LBOVF,
> + .csicr1 = 0,
> }
> },
> {
> @@ -343,6 +347,21 @@ static struct mx2_fmt_cfg mx27_emma_prp_table[] = {
> .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR |
> PRP_INTR_CH2FC | PRP_INTR_LBOVF |
> PRP_INTR_CH2OVF,
> + .csicr1 = CSICR1_PACK_DIR,
> + }
> + },
> + {
> + .in_fmt = V4L2_MBUS_FMT_UYVY8_2X8,
> + .out_fmt = V4L2_PIX_FMT_YUV420,
> + .cfg = {
> + .channel = 2,
> + .in_fmt = PRP_CNTL_DATA_IN_YUV422,
> + .out_fmt = PRP_CNTL_CH2_OUT_YUV420,
> + .src_pixel = 0x22000888, /* YUV422 (YUYV) */
> + .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR |
> + PRP_INTR_CH2FC | PRP_INTR_LBOVF |
> + PRP_INTR_CH2OVF,
> + .csicr1 = CSICR1_SWAP16_EN,
> }
Have you tested this patch with both YUYV8_2X8 and UYVY8_2X8 ? I'm not
familiar with the hardware, so I can't really comment on this specific hunk.
Knowing that it has been tested would be enough for me to ack the patch (after
fixing the commit message of course).
> },
> };
> @@ -1018,14 +1037,14 @@ static int mx2_camera_set_bus_param(struct
> soc_camera_device *icd) return ret;
> }
>
> + csicr1 = (csicr1 & ~CSICR1_FMT_MASK) | pcdev->emma_prp->cfg.csicr1;
> +
> if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
> csicr1 |= CSICR1_REDGE;
> if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
> csicr1 |= CSICR1_SOF_POL;
> if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
> csicr1 |= CSICR1_HSYNC_POL;
This is a completely different issue (and thus v3.6 material, if needed), but
can common_flags change between invocations ? If so you should clear the
CSICR1_* flags before conditionally setting them.
> - if (pcdev->platform_flags & MX2_CAMERA_SWAP16)
> - csicr1 |= CSICR1_SWAP16_EN;
> if (pcdev->platform_flags & MX2_CAMERA_EXT_VSYNC)
> csicr1 |= CSICR1_EXT_VSYNC;
> if (pcdev->platform_flags & MX2_CAMERA_CCIR)
> @@ -1036,8 +1055,6 @@ static int mx2_camera_set_bus_param(struct
> soc_camera_device *icd) csicr1 |= CSICR1_GCLK_MODE;
> if (pcdev->platform_flags & MX2_CAMERA_INV_DATA)
> csicr1 |= CSICR1_INV_DATA;
> - if (pcdev->platform_flags & MX2_CAMERA_PACK_DIR_MSB)
> - csicr1 |= CSICR1_PACK_DIR;
>
> pcdev->csicr1 = csicr1;
>
> @@ -1112,7 +1129,8 @@ static int mx2_camera_get_formats(struct
> soc_camera_device *icd, return 0;
> }
>
> - if (code == V4L2_MBUS_FMT_YUYV8_2X8) {
> + if (code == V4L2_MBUS_FMT_YUYV8_2X8 ||
> + code == V4L2_MBUS_FMT_UYVY8_2X8) {
> formats++;
> if (xlate) {
> /*
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
