Hello everybody ! First of all, i would like to thank you all for your wonderful work. Thanks to you, my new Terratec Cinergy T PCIE dual card is now receiving TV on my linux HTPC. The only remaining thing that is not working is the remote control (not at all). This remote control seems to be the same as a Cinergy HTC USB XS. It can be seen on image http://www.terratec.net/us/produits/photos/img/3923630_4ac1bb0a60.png So the mapping is probably the same as a Cinergy XS product. In fact, when the cx23885 module driver is loaded, no ir input is associated with the card nor created in /dev/input. Here is the output of dmesg when inserting the cx23885 module in the kernel : [ 9321.995048] cx23885 driver version 0.0.3 loaded [ 9321.999469] CORE cx23885[0]: subsystem: 153b:117e, board: TerraTec Cinergy T PCIe Dual [card=34,autodetected] [ 9322.130326] cx25840 5-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0]) [ 9322.755350] cx25840 5-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) [ 9322.788281] cx23885_dvb_register() allocating 1 frontend(s) [ 9322.788285] cx23885[0]: cx23885 based dvb card [ 9322.803661] drxk: status = 0x639160d9 [ 9322.803666] drxk: detected a drx-3916k, spin A3, xtal 20.250 MHz [ 9322.876517] DRXK driver version 0.9.4300 [ 9322.900430] drxk: frontend initialized. [ 9322.900449] mt2063_attach: Attaching MT2063 [ 9322.900451] DVB: registering new adapter (cx23885[0]) [ 9322.900454] DVB: registering adapter 0 frontend 0 (DRXK DVB-T)... [ 9322.901581] cx23885_dvb_register() allocating 1 frontend(s) [ 9322.901586] cx23885[0]: cx23885 based dvb card [ 9322.916744] drxk: status = 0x639130d9 [ 9322.916749] drxk: detected a drx-3913k, spin A3, xtal 20.250 MHz [ 9322.989590] DRXK driver version 0.9.4300 [ 9323.013545] drxk: frontend initialized. [ 9323.013567] mt2063_attach: Attaching MT2063 [ 9323.013570] DVB: registering new adapter (cx23885[0]) [ 9323.013573] DVB: registering adapter 1 frontend 0 (DRXK DVB-C DVB-T)... [ 9323.013955] cx23885_dev_checkrevision() Hardware revision = 0xa5 [ 9323.013961] cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 16, latency: 0, mmio: 0xfd800000 Any ideas on how to make the ir receiver recognized and work ? -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
