Convert radio-sf16fmi to use generic LM7000 driver.
Tested with SF16-FMI, SF16-FMP and SF16-FMD.
Signed-off-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
--- a/drivers/media/radio/radio-sf16fmi.c
+++ b/drivers/media/radio/radio-sf16fmi.c
@@ -27,6 +27,7 @@
#include <linux/io.h> /* outb, outb_p */
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
+#include "lm7000.h"
MODULE_AUTHOR("Petr Vandrovec, vandrove@xxxxxxxxxx and M. Kirkwood");
MODULE_DESCRIPTION("A driver for the SF16-FMI, SF16-FMP and SF16-FMD radio.");
@@ -54,31 +55,33 @@ static struct fmi fmi_card;
static struct pnp_dev *dev;
bool pnp_attached;
-/* freq is in 1/16 kHz to internal number, hw precision is 50 kHz */
-/* It is only useful to give freq in interval of 800 (=0.05Mhz),
- * other bits will be truncated, e.g 92.7400016 -> 92.7, but
- * 92.7400017 -> 92.75
- */
-#define RSF16_ENCODE(x) ((x) / 800 + 214)
#define RSF16_MINFREQ (87 * 16000)
#define RSF16_MAXFREQ (108 * 16000)
-static void outbits(int bits, unsigned int data, int io)
+#define FMI_BIT_TUN_CE (1 << 0)
+#define FMI_BIT_TUN_CLK (1 << 1)
+#define FMI_BIT_TUN_DATA (1 << 2)
+#define FMI_BIT_VOL_SW (1 << 3)
+#define FMI_BIT_TUN_STRQ (1 << 4)
+
+void fmi_set_pins(void *handle, u8 pins)
{
- while (bits--) {
- if (data & 1) {
- outb(5, io);
- udelay(6);
- outb(7, io);
- udelay(6);
- } else {
- outb(1, io);
- udelay(6);
- outb(3, io);
- udelay(6);
- }
- data >>= 1;
- }
+ struct fmi *fmi = handle;
+ u8 bits = FMI_BIT_TUN_STRQ;
+
+ if (!fmi->mute)
+ bits |= FMI_BIT_VOL_SW;
+
+ if (pins & LM7000_DATA)
+ bits |= FMI_BIT_TUN_DATA;
+ if (pins & LM7000_CLK)
+ bits |= FMI_BIT_TUN_CLK;
+ if (pins & LM7000_CE)
+ bits |= FMI_BIT_TUN_CE;
+
+ mutex_lock(&fmi->lock);
+ outb_p(bits, fmi->io);
+ mutex_unlock(&fmi->lock);
}
static inline void fmi_mute(struct fmi *fmi)
@@ -95,20 +98,6 @@ static inline void fmi_unmute(struct fmi *fmi)
mutex_unlock(&fmi->lock);
}
-static inline int fmi_setfreq(struct fmi *fmi, unsigned long freq)
-{
- mutex_lock(&fmi->lock);
- fmi->curfreq = freq;
-
- outbits(16, RSF16_ENCODE(freq), fmi->io);
- outbits(8, 0xC0, fmi->io);
- msleep(143); /* was schedule_timeout(HZ/7) */
- mutex_unlock(&fmi->lock);
- if (!fmi->mute)
- fmi_unmute(fmi);
- return 0;
-}
-
static inline int fmi_getsigstr(struct fmi *fmi)
{
int val;
@@ -173,7 +162,7 @@ static int vidioc_s_frequency(struct file *file, void *priv,
return -EINVAL;
/* rounding in steps of 800 to match the freq
that will be used */
- fmi_setfreq(fmi, (f->frequency / 800) * 800);
+ lm7000_set_freq((f->frequency / 800) * 800, fmi, fmi_set_pins);
return 0;
}
--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
