Add very simple driver for Sanyo LM7000 AM/FM tuner chip. Only FM is supported
as there is no known HW with AM implemented.
This will be used by radio-aimslab and radio-sf16fmi.
Signed-off-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
diff --git a/drivers/media/radio/lm7000.h b/drivers/media/radio/lm7000.h
new file mode 100644
index 0000000..139cd6b
--- /dev/null
+++ b/drivers/media/radio/lm7000.h
@@ -0,0 +1,43 @@
+#ifndef __LM7000_H
+#define __LM7000_H
+
+/* Sanyo LM7000 tuner chip control
+ *
+ * Copyright 2012 Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
+ * based on radio-aimslab.c by M. Kirkwood
+ * and radio-sf16fmi.c by M. Kirkwood and Petr Vandrovec
+ */
+
+#define LM7000_DATA (1 << 0)
+#define LM7000_CLK (1 << 1)
+#define LM7000_CE (1 << 2)
+
+#define LM7000_FM_100 (0 << 20)
+#define LM7000_FM_50 (1 << 20)
+#define LM7000_FM_25 (2 << 20)
+#define LM7000_BIT_FM (1 << 23)
+
+static inline void lm7000_set_freq(u32 freq, void *handle,
+ void (*set_pins)(void *handle, u8 pins))
+{
+ int i;
+ u8 data;
+ u32 val;
+
+ freq += 171200; /* Add 10.7 MHz IF */
+ freq /= 400; /* Convert to 25 kHz units */
+ val = freq | LM7000_FM_25 | LM7000_BIT_FM;
+ /* write the 24-bit register, starting with LSB */
+ for (i = 0; i < 24; i++) {
+ data = val & (1 << i) ? LM7000_DATA : 0;
+ set_pins(handle, data | LM7000_CE);
+ udelay(2);
+ set_pins(handle, data | LM7000_CE | LM7000_CLK);
+ udelay(2);
+ set_pins(handle, data | LM7000_CE);
+ udelay(2);
+ }
+ set_pins(handle, 0);
+}
+
+#endif /* __LM7000_H */
--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
