On May 28 Stefan Richter wrote: > > + idev->phys = "/ir0"; /* FIXME */ > > Something similar to drivers/media/dvb/dvb-usb/dvb-usb-remote.c:: > > usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys)); > strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys)); > > should be implemented for this, right? PS: The current input device looks like this: /sys/devices/pci0000:00/0000:00:02.0/0000:02:00.0/0000:03:01.0/0000:04:00.0/fw7/fw7.0/input/input8/device -> ../../../fw7.0 "fw7.0" is dev_name(dev) in fdtv_register_rc() or dev_name(fdtv->device) in general in firedtv. The last numeric name before fw7, i.e. 0000:04:00.0, is the name of the PCI device of the FireWire controller. fw7 is the name of the FireDTV node; fw7.0 is the name of the (only) unit within the FireDTV node which implements the DVB receiver and IR receiver. What would be needed from this? FWIW, usb_make_path() results in "usb-%s-%s" % (usb_device.bus.bus_name, usb_device.devpath). -- Stefan Richter -=====-===-- -=-= ===-- http://arcgraph.de/sr/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
