After this patch, the MEDIA*_SUPP will be used as a filter, exposing only devices that are pertinent to one of the 3 V4L types: webcam/grabber, radio, analog TV. Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> --- drivers/media/radio/Kconfig | 1 + drivers/media/video/Kconfig | 76 ++++++++++++++++++++++++++--------- drivers/media/video/m5mols/Kconfig | 1 + drivers/media/video/smiapp/Kconfig | 1 + 4 files changed, 59 insertions(+), 20 deletions(-) diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index c257da1..ac4f627 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -5,6 +5,7 @@ menuconfig RADIO_ADAPTERS bool "Radio Adapters" depends on VIDEO_V4L2 + depends on MEDIA_RADIO_SUPP default y ---help--- Say Y here to enable selecting AM/FM radio adapters. diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 99937c9..bc7f55e 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -5,7 +5,7 @@ config VIDEO_V4L2 tristate depends on VIDEO_DEV && VIDEO_V4L2_COMMON - default VIDEO_DEV && VIDEO_V4L2_COMMON + default y config VIDEOBUF_GEN tristate @@ -73,6 +73,7 @@ config VIDEOBUF2_DMA_SG menuconfig VIDEO_CAPTURE_DRIVERS bool "Video capture adapters" depends on VIDEO_V4L2 + depends on MEDIA_WEBCAM_SUPP || MEDIA_ANALOG_TV_SUPP default y ---help--- Say Y here to enable selecting the video adapters for @@ -478,6 +479,7 @@ config VIDEO_SMIAPP_PLL config VIDEO_OV7670 tristate "OmniVision OV7670 sensor support" depends on I2C && VIDEO_V4L2 + depends on MEDIA_WEBCAM_SUPP ---help--- This is a Video4Linux2 sensor-level driver for the OmniVision OV7670 VGA camera. It currently only works with the M88ALP01 @@ -486,6 +488,7 @@ config VIDEO_OV7670 config VIDEO_VS6624 tristate "ST VS6624 sensor support" depends on VIDEO_V4L2 && I2C + depends on MEDIA_WEBCAM_SUPP ---help--- This is a Video4Linux2 sensor-level driver for the ST VS6624 camera. @@ -496,6 +499,7 @@ config VIDEO_VS6624 config VIDEO_MT9M032 tristate "MT9M032 camera sensor support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_WEBCAM_SUPP select VIDEO_APTINA_PLL ---help--- This driver supports MT9M032 camera sensors from Aptina, monochrome @@ -504,6 +508,7 @@ config VIDEO_MT9M032 config VIDEO_MT9P031 tristate "Aptina MT9P031 support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_WEBCAM_SUPP select VIDEO_APTINA_PLL ---help--- This is a Video4Linux2 sensor-level driver for the Aptina @@ -512,6 +517,7 @@ config VIDEO_MT9P031 config VIDEO_MT9T001 tristate "Aptina MT9T001 support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_WEBCAM_SUPP ---help--- This is a Video4Linux2 sensor-level driver for the Aptina (Micron) mt0t001 3 Mpixel camera. @@ -519,6 +525,7 @@ config VIDEO_MT9T001 config VIDEO_MT9V011 tristate "Micron mt9v011 sensor support" depends on I2C && VIDEO_V4L2 + depends on MEDIA_WEBCAM_SUPP ---help--- This is a Video4Linux2 sensor-level driver for the Micron mt0v011 1.3 Mpixel camera. It currently only works with the @@ -527,6 +534,7 @@ config VIDEO_MT9V011 config VIDEO_MT9V032 tristate "Micron MT9V032 sensor support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_WEBCAM_SUPP ---help--- This is a Video4Linux2 sensor-level driver for the Micron MT9V032 752x480 CMOS sensor. @@ -534,6 +542,7 @@ config VIDEO_MT9V032 config VIDEO_TCM825X tristate "TCM825x camera sensor support" depends on I2C && VIDEO_V4L2 + depends on MEDIA_WEBCAM_SUPP ---help--- This is a driver for the Toshiba TCM825x VGA camera sensor. It is used for example in Nokia N800. @@ -541,12 +550,14 @@ config VIDEO_TCM825X config VIDEO_SR030PC30 tristate "Siliconfile SR030PC30 sensor support" depends on I2C && VIDEO_V4L2 + depends on MEDIA_WEBCAM_SUPP ---help--- This driver supports SR030PC30 VGA camera from Siliconfile config VIDEO_NOON010PC30 tristate "Siliconfile NOON010PC30 sensor support" depends on I2C && VIDEO_V4L2 && EXPERIMENTAL && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_WEBCAM_SUPP ---help--- This driver supports NOON010PC30 CIF camera from Siliconfile @@ -554,6 +565,7 @@ source "drivers/media/video/m5mols/Kconfig" config VIDEO_S5K6AA tristate "Samsung S5K6AAFX sensor support" + depends on MEDIA_WEBCAM_SUPP depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API ---help--- This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M @@ -566,6 +578,7 @@ comment "Flash devices" config VIDEO_ADP1653 tristate "ADP1653 flash support" depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER + depends on MEDIA_WEBCAM_SUPP ---help--- This is a driver for the ADP1653 flash controller. It is used for example in Nokia N900. @@ -573,6 +586,7 @@ config VIDEO_ADP1653 config VIDEO_AS3645A tristate "AS3645A flash driver support" depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER + depends on MEDIA_WEBCAM_SUPP ---help--- This is a driver for the AS3645A and LM3555 flash controllers. It has build in control for flash, torch and indicator LEDs. @@ -647,30 +661,14 @@ menuconfig V4L_USB_DRIVERS depends on USB default y -if V4L_USB_DRIVERS +if V4L_USB_DRIVERS && MEDIA_WEBCAM_SUPP -source "drivers/media/video/au0828/Kconfig" + comment "Webcam devices" source "drivers/media/video/uvc/Kconfig" source "drivers/media/video/gspca/Kconfig" -source "drivers/media/video/pvrusb2/Kconfig" - -source "drivers/media/video/hdpvr/Kconfig" - -source "drivers/media/video/em28xx/Kconfig" - -source "drivers/media/video/tlg2300/Kconfig" - -source "drivers/media/video/cx231xx/Kconfig" - -source "drivers/media/video/tm6000/Kconfig" - -source "drivers/media/video/usbvision/Kconfig" - -source "drivers/media/video/sn9c102/Kconfig" - source "drivers/media/video/pwc/Kconfig" source "drivers/media/video/cpia2/Kconfig" @@ -711,15 +709,46 @@ config USB_S2255 Say Y here if you want support for the Sensoray 2255 USB device. This driver can be compiled as a module, called s2255drv. +source "drivers/media/video/sn9c102/Kconfig" + +endif # V4L_USB_DRIVERS && MEDIA_WEBCAM_SUPP + +if V4L_USB_DRIVERS + + comment "Webcam and/or TV USB devices" + +source "drivers/media/video/em28xx/Kconfig" + +endif + +if V4L_USB_DRIVERS && MEDIA_ANALOG_TV_SUPP + + comment "TV USB devices" + +source "drivers/media/video/au0828/Kconfig" + +source "drivers/media/video/pvrusb2/Kconfig" + +source "drivers/media/video/hdpvr/Kconfig" + +source "drivers/media/video/tlg2300/Kconfig" + +source "drivers/media/video/cx231xx/Kconfig" + +source "drivers/media/video/tm6000/Kconfig" + +source "drivers/media/video/usbvision/Kconfig" + endif # V4L_USB_DRIVERS # -# PCI drivers configuration +# PCI drivers configuration - No devices here are for webcams # menuconfig V4L_PCI_DRIVERS bool "V4L PCI(e) devices" depends on PCI + depends on MEDIA_ANALOG_TV_SUPP default y ---help--- Say Y here to enable support for these PCI(e) drivers. @@ -814,11 +843,13 @@ endif # V4L_PCI_DRIVERS # # ISA & parallel port drivers configuration +# All devices here are webcam or grabber devices # menuconfig V4L_ISA_PARPORT_DRIVERS bool "V4L ISA and parallel port devices" depends on ISA || PARPORT + depends on MEDIA_WEBCAM_SUPP default n ---help--- Say Y here to enable support for these ISA and parallel port drivers. @@ -871,8 +902,13 @@ config VIDEO_W9966 endif # V4L_ISA_PARPORT_DRIVERS +# +# Platform drivers +# All drivers here are currently for webcam support + menuconfig V4L_PLATFORM_DRIVERS bool "V4L platform devices" + depends on MEDIA_WEBCAM_SUPP default n ---help--- Say Y here to enable support for platform-specific V4L drivers. diff --git a/drivers/media/video/m5mols/Kconfig b/drivers/media/video/m5mols/Kconfig index 302dc3d..5d8ce31 100644 --- a/drivers/media/video/m5mols/Kconfig +++ b/drivers/media/video/m5mols/Kconfig @@ -1,5 +1,6 @@ config VIDEO_M5MOLS tristate "Fujitsu M-5MOLS 8MP sensor support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_WEBCAM_SUPP ---help--- This driver supports Fujitsu M-5MOLS camera sensor with ISP diff --git a/drivers/media/video/smiapp/Kconfig b/drivers/media/video/smiapp/Kconfig index f7b35ff..209e824 100644 --- a/drivers/media/video/smiapp/Kconfig +++ b/drivers/media/video/smiapp/Kconfig @@ -1,6 +1,7 @@ config VIDEO_SMIAPP tristate "SMIA++/SMIA sensor support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_WEBCAM_SUPP select VIDEO_SMIAPP_PLL ---help--- This is a generic driver for SMIA++/SMIA camera modules. -- 1.7.8 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
