Re: [PATCH v4 1/5] rtl2832 ver. 0.4: removed signal statistics

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Moikka Thomas,

Here is the review. See comments below.

And conclusion is that it is ready for the Kernel merge. I did not see any big functiuonality problems - only some small issues that are likely considered as a coding style etc. Feel free to fix those and sent new patc serie or just new patch top of that.

Reviewed-by: Antti Palosaari <crope@xxxxxx>


On 17.05.2012 01:13, Thomas Mair wrote:
Changelog for ver. 0.3:
- removed statistics as their calculation was wrong
- fixed bug in Makefile
- indentation and code style improvements

Signed-off-by: Thomas Mair<thomas.mair86@xxxxxxxxxxxxxx>
---
  drivers/media/dvb/frontends/Kconfig        |    7 +
  drivers/media/dvb/frontends/Makefile       |    1 +
  drivers/media/dvb/frontends/rtl2832.c      |  825 ++++++++++++++++++++++++++++
  drivers/media/dvb/frontends/rtl2832.h      |   74 +++
  drivers/media/dvb/frontends/rtl2832_priv.h |  258 +++++++++
  5 files changed, 1165 insertions(+), 0 deletions(-)
  create mode 100644 drivers/media/dvb/frontends/rtl2832.c
  create mode 100644 drivers/media/dvb/frontends/rtl2832.h
  create mode 100644 drivers/media/dvb/frontends/rtl2832_priv.h

diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index f479834..f7d67d7 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -432,6 +432,13 @@ config DVB_RTL2830
  	help
  	  Say Y when you want to support this frontend.

+config DVB_RTL2832
+	tristate "Realtek RTL2832 DVB-T"
+	depends on DVB_CORE&&  I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  Say Y when you want to support this frontend.
+

It is correct.

Just for the comment as you said in cover letter that you are unsure about that.

  comment "DVB-C (cable) frontends"
  	depends on DVB_CORE

diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index b0381dc..bbf2955 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -98,6 +98,7 @@ obj-$(CONFIG_DVB_IT913X_FE) += it913x-fe.o
  obj-$(CONFIG_DVB_A8293) += a8293.o
  obj-$(CONFIG_DVB_TDA10071) += tda10071.o
  obj-$(CONFIG_DVB_RTL2830) += rtl2830.o
+obj-$(CONFIG_DVB_RTL2830) += rtl2832.o
  obj-$(CONFIG_DVB_M88RS2000) += m88rs2000.o
  obj-$(CONFIG_DVB_AF9033) += af9033.o

diff --git a/drivers/media/dvb/frontends/rtl2832.c b/drivers/media/dvb/frontends/rtl2832.c
new file mode 100644
index 0000000..51c7927
--- /dev/null
+++ b/drivers/media/dvb/frontends/rtl2832.c
@@ -0,0 +1,825 @@
+/*
+ * Realtek RTL2832 DVB-T demodulator driver
+ *
+ * Copyright (C) 2012 Thomas Mair<thomas.mair86@xxxxxxxxx>
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License along
+ *	with this program; if not, write to the Free Software Foundation, Inc.,
+ *	51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include "rtl2832_priv.h"
+
+
+int rtl2832_debug;
+module_param_named(debug, rtl2832_debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
+
+static int reg_mask[32] = {

This should be static const.

+	0x00000001,
+	0x00000003,
+	0x00000007,
+	0x0000000f,
+	0x0000001f,
+	0x0000003f,
+	0x0000007f,
+	0x000000ff,
+	0x000001ff,
+	0x000003ff,
+	0x000007ff,
+	0x00000fff,
+	0x00001fff,
+	0x00003fff,
+	0x00007fff,
+	0x0000ffff,
+	0x0001ffff,
+	0x0003ffff,
+	0x0007ffff,
+	0x000fffff,
+	0x001fffff,
+	0x003fffff,
+	0x007fffff,
+	0x00ffffff,
+	0x01ffffff,
+	0x03ffffff,
+	0x07ffffff,
+	0x0fffffff,
+	0x1fffffff,
+	0x3fffffff,
+	0x7fffffff,
+	0xffffffff
+};
+
+struct rtl2832_reg_entry registers[] = {

static const struct

+	[DVBT_SOFT_RST]		= {0x1, 0x1,   2, 2},
+	[DVBT_IIC_REPEAT]	= {0x1, 0x1,   3, 3},
+	[DVBT_TR_WAIT_MIN_8K]	= {0x1, 0x88, 11, 2},
+	[DVBT_RSD_BER_FAIL_VAL]	= {0x1, 0x8f, 15, 0},
+	[DVBT_EN_BK_TRK]	= {0x1, 0xa6,  7, 7},
+	[DVBT_AD_EN_REG]	= {0x0, 0x8,   7, 7},
+	[DVBT_AD_EN_REG1]	= {0x0, 0x8,   6, 6},
+	[DVBT_EN_BBIN]		= {0x1, 0xb1,  0, 0},
+	[DVBT_MGD_THD0]		= {0x1, 0x95,  7, 0},
+	[DVBT_MGD_THD1]		= {0x1, 0x96,  7, 0},
+	[DVBT_MGD_THD2]		= {0x1, 0x97,  7, 0},
+	[DVBT_MGD_THD3]		= {0x1, 0x98,  7, 0},
+	[DVBT_MGD_THD4]		= {0x1, 0x99,  7, 0},
+	[DVBT_MGD_THD5]		= {0x1, 0x9a,  7, 0},
+	[DVBT_MGD_THD6]		= {0x1, 0x9b,  7, 0},
+	[DVBT_MGD_THD7]		= {0x1, 0x9c,  7, 0},
+	[DVBT_EN_CACQ_NOTCH]	= {0x1, 0x61,  4, 4},
+	[DVBT_AD_AV_REF]	= {0x0, 0x9,   6, 0},
+	[DVBT_REG_PI]		= {0x0, 0xa,   2, 0},
+	[DVBT_PIP_ON]		= {0x0, 0x21,  3, 3},
+	[DVBT_SCALE1_B92]	= {0x2, 0x92,  7, 0},
+	[DVBT_SCALE1_B93]	= {0x2, 0x93,  7, 0},
+	[DVBT_SCALE1_BA7]	= {0x2, 0xa7,  7, 0},
+	[DVBT_SCALE1_BA9]	= {0x2, 0xa9,  7, 0},
+	[DVBT_SCALE1_BAA]	= {0x2, 0xaa,  7, 0},
+	[DVBT_SCALE1_BAB]	= {0x2, 0xab,  7, 0},
+	[DVBT_SCALE1_BAC]	= {0x2, 0xac,  7, 0},
+	[DVBT_SCALE1_BB0]	= {0x2, 0xb0,  7, 0},
+	[DVBT_SCALE1_BB1]	= {0x2, 0xb1,  7, 0},
+	[DVBT_KB_P1]		= {0x1, 0x64,  3, 1},
+	[DVBT_KB_P2]		= {0x1, 0x64,  6, 4},
+	[DVBT_KB_P3]		= {0x1, 0x65,  2, 0},
+	[DVBT_OPT_ADC_IQ]	= {0x0, 0x6,   5, 4},
+	[DVBT_AD_AVI]		= {0x0, 0x9,   1, 0},
+	[DVBT_AD_AVQ]		= {0x0, 0x9,   3, 2},
+	[DVBT_K1_CR_STEP12]	= {0x2, 0xad,  9, 4},
+	[DVBT_TRK_KS_P2]	= {0x1, 0x6f,  2, 0},
+	[DVBT_TRK_KS_I2]	= {0x1, 0x70,  5, 3},
+	[DVBT_TR_THD_SET2]	= {0x1, 0x72,  3, 0},
+	[DVBT_TRK_KC_P2]	= {0x1, 0x73,  5, 3},
+	[DVBT_TRK_KC_I2]	= {0x1, 0x75,  2, 0},
+	[DVBT_CR_THD_SET2]	= {0x1, 0x76,  7, 6},
+	[DVBT_PSET_IFFREQ]	= {0x1, 0x19, 21, 0},
+	[DVBT_SPEC_INV]		= {0x1, 0x15,  0, 0},
+	[DVBT_RSAMP_RATIO]	= {0x1, 0x9f, 27, 2},
+	[DVBT_CFREQ_OFF_RATIO]	= {0x1, 0x9d, 23, 4},
+	[DVBT_FSM_STAGE]	= {0x3, 0x51,  6, 3},
+	[DVBT_RX_CONSTEL]	= {0x3, 0x3c,  3, 2},
+	[DVBT_RX_HIER]		= {0x3, 0x3c,  6, 4},
+	[DVBT_RX_C_RATE_LP]	= {0x3, 0x3d,  2, 0},
+	[DVBT_RX_C_RATE_HP]	= {0x3, 0x3d,  5, 3},
+	[DVBT_GI_IDX]		= {0x3, 0x51,  1, 0},
+	[DVBT_FFT_MODE_IDX]	= {0x3, 0x51,  2, 2},
+	[DVBT_RSD_BER_EST]	= {0x3, 0x4e, 15, 0},
+	[DVBT_CE_EST_EVM]	= {0x4, 0xc,  15, 0},
+	[DVBT_RF_AGC_VAL]	= {0x3, 0x5b, 13, 0},
+	[DVBT_IF_AGC_VAL]	= {0x3, 0x59, 13, 0},
+	[DVBT_DAGC_VAL]		= {0x3, 0x5,   7, 0},
+	[DVBT_SFREQ_OFF]	= {0x3, 0x18, 13, 0},
+	[DVBT_CFREQ_OFF]	= {0x3, 0x5f, 17, 0},
+	[DVBT_POLAR_RF_AGC]	= {0x0, 0xe,   1, 1},
+	[DVBT_POLAR_IF_AGC]	= {0x0, 0xe,   0, 0},
+	[DVBT_AAGC_HOLD]	= {0x1, 0x4,   5, 5},
+	[DVBT_EN_RF_AGC]	= {0x1, 0x4,   6, 6},
+	[DVBT_EN_IF_AGC]	= {0x1, 0x4,   7, 7},
+	[DVBT_IF_AGC_MIN]	= {0x1, 0x8,   7, 0},
+	[DVBT_IF_AGC_MAX]	= {0x1, 0x9,   7, 0},
+	[DVBT_RF_AGC_MIN]	= {0x1, 0xa,   7, 0},
+	[DVBT_RF_AGC_MAX]	= {0x1, 0xb,   7, 0},
+	[DVBT_IF_AGC_MAN]	= {0x1, 0xc,   6, 6},
+	[DVBT_IF_AGC_MAN_VAL]	= {0x1, 0xc,  13, 0},
+	[DVBT_RF_AGC_MAN]	= {0x1, 0xe,   6, 6},
+	[DVBT_RF_AGC_MAN_VAL]	= {0x1, 0xe,  13, 0},
+	[DVBT_DAGC_TRG_VAL]	= {0x1, 0x12,  7, 0},
+	[DVBT_AGC_TARG_VAL_0]	= {0x1, 0x2,   0, 0},
+	[DVBT_AGC_TARG_VAL_8_1]	= {0x1, 0x3,   7, 0},
+	[DVBT_AAGC_LOOP_GAIN]	= {0x1, 0xc7,  5, 1},
+	[DVBT_LOOP_GAIN2_3_0]	= {0x1, 0x4,   4, 1},
+	[DVBT_LOOP_GAIN2_4]	= {0x1, 0x5,   7, 7},
+	[DVBT_LOOP_GAIN3]	= {0x1, 0xc8,  4, 0},
+	[DVBT_VTOP1]		= {0x1, 0x6,   5, 0},
+	[DVBT_VTOP2]		= {0x1, 0xc9,  5, 0},
+	[DVBT_VTOP3]		= {0x1, 0xca,  5, 0},
+	[DVBT_KRF1]		= {0x1, 0xcb,  7, 0},
+	[DVBT_KRF2]		= {0x1, 0x7,   7, 0},
+	[DVBT_KRF3]		= {0x1, 0xcd,  7, 0},
+	[DVBT_KRF4]		= {0x1, 0xce,  7, 0},
+	[DVBT_EN_GI_PGA]	= {0x1, 0xe5,  0, 0},
+	[DVBT_THD_LOCK_UP]	= {0x1, 0xd9,  8, 0},
+	[DVBT_THD_LOCK_DW]	= {0x1, 0xdb,  8, 0},
+	[DVBT_THD_UP1]		= {0x1, 0xdd,  7, 0},
+	[DVBT_THD_DW1]		= {0x1, 0xde,  7, 0},
+	[DVBT_INTER_CNT_LEN]	= {0x1, 0xd8,  3, 0},
+	[DVBT_GI_PGA_STATE]	= {0x1, 0xe6,  3, 3},
+	[DVBT_EN_AGC_PGA]	= {0x1, 0xd7,  0, 0},
+	[DVBT_CKOUTPAR]		= {0x1, 0x7b,  5, 5},
+	[DVBT_CKOUT_PWR]	= {0x1, 0x7b,  6, 6},
+	[DVBT_SYNC_DUR]		= {0x1, 0x7b,  7, 7},
+	[DVBT_ERR_DUR]		= {0x1, 0x7c,  0, 0},
+	[DVBT_SYNC_LVL]		= {0x1, 0x7c,  1, 1},
+	[DVBT_ERR_LVL]		= {0x1, 0x7c,  2, 2},
+	[DVBT_VAL_LVL]		= {0x1, 0x7c,  3, 3},
+	[DVBT_SERIAL]		= {0x1, 0x7c,  4, 4},
+	[DVBT_SER_LSB]		= {0x1, 0x7c,  5, 5},
+	[DVBT_CDIV_PH0]		= {0x1, 0x7d,  3, 0},
+	[DVBT_CDIV_PH1]		= {0x1, 0x7d,  7, 4},
+	[DVBT_MPEG_IO_OPT_2_2]	= {0x0, 0x6,   7, 7},
+	[DVBT_MPEG_IO_OPT_1_0]	= {0x0, 0x7,   7, 6},
+	[DVBT_CKOUTPAR_PIP]	= {0x0, 0xb7,  4, 4},
+	[DVBT_CKOUT_PWR_PIP]	= {0x0, 0xb7,  3, 3},
+	[DVBT_SYNC_LVL_PIP]	= {0x0, 0xb7,  2, 2},
+	[DVBT_ERR_LVL_PIP]	= {0x0, 0xb7,  1, 1},
+	[DVBT_VAL_LVL_PIP]	= {0x0, 0xb7,  0, 0},
+	[DVBT_CKOUTPAR_PID]	= {0x0, 0xb9,  4, 4},
+	[DVBT_CKOUT_PWR_PID]	= {0x0, 0xb9,  3, 3},
+	[DVBT_SYNC_LVL_PID]	= {0x0, 0xb9,  2, 2},
+	[DVBT_ERR_LVL_PID]	= {0x0, 0xb9,  1, 1},
+	[DVBT_VAL_LVL_PID]	= {0x0, 0xb9,  0, 0},
+	[DVBT_SM_PASS]		= {0x1, 0x93, 11, 0},
+	[DVBT_AD7_SETTING]	= {0x0, 0x11, 15, 0},
+	[DVBT_RSSI_R]		= {0x3, 0x1,   6, 0},
+	[DVBT_ACI_DET_IND]	= {0x3, 0x12,  0, 0},
+	[DVBT_REG_MON]		= {0x0, 0xd,   1, 0},
+	[DVBT_REG_MONSEL]	= {0x0, 0xd,   2, 2},
+	[DVBT_REG_GPE]		= {0x0, 0xd,   7, 7},
+	[DVBT_REG_GPO]		= {0x0, 0x10,  0, 0},
+	[DVBT_REG_4MSEL]	= {0x0, 0x13,  0, 0},
+};
+
+/* write multiple hardware registers */
+static int rtl2832_wr(struct rtl2832_priv *priv, u8 reg, u8 *val, int len)
+{
+	int ret;
+	u8 buf[1+len];
+	struct i2c_msg msg[1] = {
+		{
+			.addr = priv->cfg.i2c_addr,
+			.flags = 0,
+			.len = 1+len,
+			.buf = buf,
+		}
+	};
+
+	buf[0] = reg;
+	memcpy(&buf[1], val, len);
+
+	ret = i2c_transfer(priv->i2c, msg, 1);
+	if (ret == 1) {
+		ret = 0;
+	} else {
+		warn("i2c wr failed=%d reg=%02x len=%d", ret, reg, len);
+		ret = -EREMOTEIO;
+	}
+	return ret;
+}
+
+/* read multiple hardware registers */
+static int rtl2832_rd(struct rtl2832_priv *priv, u8 reg, u8 *val, int len)
+{
+	int ret;
+	struct i2c_msg msg[2] = {
+		{
+			.addr = priv->cfg.i2c_addr,
+			.flags = 0,
+			.len = 1,
+			.buf =&reg,
+		}, {
+			.addr = priv->cfg.i2c_addr,
+			.flags = I2C_M_RD,
+			.len = len,
+			.buf = val,
+		}
+	};
+
+	ret = i2c_transfer(priv->i2c, msg, 2);
+	if (ret == 2) {
+		ret = 0;
+	} else {
+		warn("i2c rd failed=%d reg=%02x len=%d", ret, reg, len);
+		ret = -EREMOTEIO;
+}
+return ret;
+}
+
+/* write multiple registers */
+static int rtl2832_wr_regs(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val,
+	int len)
+{
+	int ret;
+
+
+	/* switch bank if needed */
+	if (page != priv->page) {
+		ret = rtl2832_wr(priv, 0x00,&page, 1);
+		if (ret)
+			return ret;
+
+		priv->page = page;
+}
+
+return rtl2832_wr(priv, reg, val, len);
+}
+
+/* read multiple registers */
+static int rtl2832_rd_regs(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val,
+	int len)
+{
+	int ret;
+
+	/* switch bank if needed */
+	if (page != priv->page) {
+		ret = rtl2832_wr(priv, 0x00,&page, 1);
+		if (ret)
+			return ret;
+
+		priv->page = page;
+	}
+
+	return rtl2832_rd(priv, reg, val, len);
+}
+
+#if 0 /* currently not used */
+/* write single register */
+static int rtl2832_wr_reg(struct rtl2832_priv *priv, u8 reg, u8 page, u8 val)
+{
+	return rtl2832_wr_regs(priv, reg, page,&val, 1);
+}
+#endif
+
+/* read single register */
+static int rtl2832_rd_reg(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val)
+{
+	return rtl2832_rd_regs(priv, reg, page, val, 1);
+}
+
+int rtl2832_rd_demod_reg(struct rtl2832_priv *priv, int reg, u32 *val)
+{
+	int ret;
+
+	u8 reg_start_addr;
+	u8 msb, lsb;
+	u8 page;
+	u8 reading[4];
+	u32 reading_tmp;
+	int i;
+
+	u8 len;
+	u32 mask;
+
+	reg_start_addr = registers[reg].start_address;
+	msb = registers[reg].msb;
+	lsb = registers[reg].lsb;
+	page = registers[reg].page;
+
+	len = (msb>>  3) + 1;
+	mask = reg_mask[msb-lsb];

You should use spaces here. See Documentation/CodingStyle line 206.

+
+
+	ret = rtl2832_rd_regs(priv, reg_start_addr, page,&reading[0], len);
+	if (ret)
+		goto err;
+
+	reading_tmp = 0;
+	for (i = 0; i<  len; i++)
+		reading_tmp |= reading[i]<<  ((len-1-i)*8);

You should use spaces here. See Documentation/CodingStyle line 206.

+
+	*val = (reading_tmp>>  lsb)&  mask;
+
+	return ret;
+
+err:
+	dbg("%s: failed=%d", __func__, ret);
+	return ret;
+
+}
+
+int rtl2832_wr_demod_reg(struct rtl2832_priv *priv, int reg, u32 val)
+{
+	int ret, i;
+	u8 len;
+	u8 reg_start_addr;
+	u8 msb, lsb;
+	u8 page;
+	u32 mask;
+
+
+	u8 reading[4];
+	u8 writing[4];
+	u32 reading_tmp;
+	u32 writing_tmp;
+
+
+	reg_start_addr = registers[reg].start_address;
+	msb = registers[reg].msb;
+	lsb = registers[reg].lsb;
+	page = registers[reg].page;
+
+	len = (msb>>  3) + 1;
+	mask = reg_mask[msb-lsb];

You should use spaces here. See Documentation/CodingStyle line 206.

+
+
+	ret = rtl2832_rd_regs(priv, reg_start_addr, page,&reading[0], len);
+	if (ret)
+		goto err;
+
+	reading_tmp = 0;
+	for (i = 0; i<  len; i++)
+		reading_tmp |= reading[i]<<  ((len-1-i)*8);

You should use spaces here. See Documentation/CodingStyle line 206.

+
+	writing_tmp = reading_tmp&  ~(mask<<  lsb);
+	writing_tmp |= ((val&  mask)<<  lsb);
+
+
+	for (i = 0; i<  len; i++)
+		writing[i] = (writing_tmp>>  ((len-1-i)*8))&  0xff;

You should use spaces here. See Documentation/CodingStyle line 206.

+
+	ret = rtl2832_wr_regs(priv, reg_start_addr, page,&writing[0], len);
+	if (ret)
+		goto err;
+
+	return ret;
+
+err:
+	dbg("%s: failed=%d", __func__, ret);
+	return ret;
+
+}
+
+
+static int rtl2832_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+	int ret;
+	struct rtl2832_priv *priv = fe->demodulator_priv;
+
+	dbg("%s: enable=%d", __func__, enable);
+
+	/* gate already open or close */
+	if (priv->i2c_gate_state == enable)
+		return 0;
+
+	ret = rtl2832_wr_demod_reg(priv, DVBT_IIC_REPEAT, (enable ? 0x1 : 0x0));
+
+	if (ret)
+		goto err;

Excessive newline between function call and error check.

+
+	priv->i2c_gate_state = enable;
+
+	return ret;
+err:
+	dbg("%s: failed=%d", __func__, ret);
+	return ret;
+}
+
+
+
+static int rtl2832_init(struct dvb_frontend *fe)
+{
+	struct rtl2832_priv *priv = fe->demodulator_priv;
+	int i, ret;
+
+	u8 en_bbin;
+	u64 pset_iffreq;
+
+	/* initialization values for the demodulator registers */
+	struct rtl2832_reg_value rtl2832_initial_regs[] = {
+		{DVBT_AD_EN_REG,		0x1},
+		{DVBT_AD_EN_REG1,		0x1},
+		{DVBT_RSD_BER_FAIL_VAL,		0x2800},
+		{DVBT_MGD_THD0,			0x10},
+		{DVBT_MGD_THD1,			0x20},
+		{DVBT_MGD_THD2,			0x20},
+		{DVBT_MGD_THD3,			0x40},
+		{DVBT_MGD_THD4,			0x22},
+		{DVBT_MGD_THD5,			0x32},
+		{DVBT_MGD_THD6,			0x37},
+		{DVBT_MGD_THD7,			0x39},
+		{DVBT_EN_BK_TRK,		0x0},
+		{DVBT_EN_CACQ_NOTCH,		0x0},
+		{DVBT_AD_AV_REF,		0x2a},
+		{DVBT_REG_PI,			0x6},
+		{DVBT_PIP_ON,			0x0},
+		{DVBT_CDIV_PH0,			0x8},
+		{DVBT_CDIV_PH1,			0x8},
+		{DVBT_SCALE1_B92,		0x4},
+		{DVBT_SCALE1_B93,		0xb0},
+		{DVBT_SCALE1_BA7,		0x78},
+		{DVBT_SCALE1_BA9,		0x28},
+		{DVBT_SCALE1_BAA,		0x59},
+		{DVBT_SCALE1_BAB,		0x83},
+		{DVBT_SCALE1_BAC,		0xd4},
+		{DVBT_SCALE1_BB0,		0x65},
+		{DVBT_SCALE1_BB1,		0x43},
+		{DVBT_KB_P1,			0x1},
+		{DVBT_KB_P2,			0x4},
+		{DVBT_KB_P3,			0x7},
+		{DVBT_K1_CR_STEP12,		0xa},
+		{DVBT_REG_GPE,			0x1},
+		{DVBT_SERIAL,			0x0},
+		{DVBT_CDIV_PH0,			0x9},
+		{DVBT_CDIV_PH1,			0x9},
+		{DVBT_MPEG_IO_OPT_2_2,		0x0},
+		{DVBT_MPEG_IO_OPT_1_0,		0x0},
+		{DVBT_TRK_KS_P2,		0x4},
+		{DVBT_TRK_KS_I2,		0x7},
+		{DVBT_TR_THD_SET2,		0x6},
+		{DVBT_TRK_KC_I2,		0x5},
+		{DVBT_CR_THD_SET2,		0x1},
+		{DVBT_SPEC_INV,			0x0},
+		{DVBT_DAGC_TRG_VAL,		0x5a},
+		{DVBT_AGC_TARG_VAL_0,		0x0},
+		{DVBT_AGC_TARG_VAL_8_1,		0x5a},
+		{DVBT_AAGC_LOOP_GAIN,		0x16},
+		{DVBT_LOOP_GAIN2_3_0,		0x6},
+		{DVBT_LOOP_GAIN2_4,		0x1},
+		{DVBT_LOOP_GAIN3,		0x16},
+		{DVBT_VTOP1,			0x35},
+		{DVBT_VTOP2,			0x21},
+		{DVBT_VTOP3,			0x21},
+		{DVBT_KRF1,			0x0},
+		{DVBT_KRF2,			0x40},
+		{DVBT_KRF3,			0x10},
+		{DVBT_KRF4,			0x10},
+		{DVBT_IF_AGC_MIN,		0x80},
+		{DVBT_IF_AGC_MAX,		0x7f},
+		{DVBT_RF_AGC_MIN,		0x80},
+		{DVBT_RF_AGC_MAX,		0x7f},
+		{DVBT_POLAR_RF_AGC,		0x0},
+		{DVBT_POLAR_IF_AGC,		0x0},
+		{DVBT_AD7_SETTING,		0xe9bf},
+		{DVBT_EN_GI_PGA,		0x0},
+		{DVBT_THD_LOCK_UP,		0x0},
+		{DVBT_THD_LOCK_DW,		0x0},
+		{DVBT_THD_UP1,			0x11},
+		{DVBT_THD_DW1,			0xef},
+		{DVBT_INTER_CNT_LEN,		0xc},
+		{DVBT_GI_PGA_STATE,		0x0},
+		{DVBT_EN_AGC_PGA,		0x1},
+		{DVBT_IF_AGC_MAN,		0x0},
+	};
+
+
+	dbg("%s", __func__);
+
+	en_bbin = (priv->cfg.if_dvbt == 0 ? 0x1 : 0x0);
+
+	/*
+	* PSET_IFFREQ = - floor((IfFreqHz % CrystalFreqHz) * pow(2, 22)
+	*		/ CrystalFreqHz)
+	*/
+	pset_iffreq = priv->cfg.if_dvbt % priv->cfg.xtal;
+	pset_iffreq *= 0x400000;
+	pset_iffreq = div_u64(pset_iffreq, priv->cfg.xtal);
+	pset_iffreq = pset_iffreq&  0x3fffff;
+
+
+
+	for (i = 0; i<  ARRAY_SIZE(rtl2832_initial_regs); i++) {
+		ret = rtl2832_wr_demod_reg(priv, rtl2832_initial_regs[i].reg,
+			rtl2832_initial_regs[i].value);
+		if (ret)
+			goto err;
+	}
+
+	/* if frequency settings */
+	ret = rtl2832_wr_demod_reg(priv, DVBT_EN_BBIN, en_bbin);
+		if (ret)
+			goto err;
+
+	ret = rtl2832_wr_demod_reg(priv, DVBT_PSET_IFFREQ, pset_iffreq);
+		if (ret)
+			goto err;
+
+	priv->sleeping = false;
+
+	return ret;
+
+err:
+	dbg("%s: failed=%d", __func__, ret);
+	return ret;
+}
+
+static int rtl2832_sleep(struct dvb_frontend *fe)
+{
+	struct rtl2832_priv *priv = fe->demodulator_priv;
+
+	dbg("%s", __func__);
+	priv->sleeping = true;
+	return 0;
+}
+
+int rtl2832_get_tune_settings(struct dvb_frontend *fe,
+	struct dvb_frontend_tune_settings *s)
+{
+	dbg("%s", __func__);
+	s->min_delay_ms = 1000;
+	s->step_size = fe->ops.info.frequency_stepsize * 2;
+	s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1;
+	return 0;
+}
+
+static int rtl2832_set_frontend(struct dvb_frontend *fe)
+{
+	struct rtl2832_priv *priv = fe->demodulator_priv;
+	struct dtv_frontend_properties *c =&fe->dtv_property_cache;
+	int ret, i, j;
+	u64 bw_mode, num, num2;
+	u32 resamp_ratio, cfreq_off_ratio;
+
+
+	static u8 bw_params[3][32] = {
+	/* 6 MHz bandwidth */
+		{
+		0xf5, 0xff, 0x15, 0x38, 0x5d, 0x6d, 0x52, 0x07, 0xfa, 0x2f,
+		0x53, 0xf5, 0x3f, 0xca, 0x0b, 0x91, 0xea, 0x30, 0x63, 0xb2,
+		0x13, 0xda, 0x0b, 0xc4, 0x18, 0x7e, 0x16, 0x66, 0x08, 0x67,
+		0x19, 0xe0,
+		},
+
+	/*  7 MHz bandwidth */
+		{
+		0xe7, 0xcc, 0xb5, 0xba, 0xe8, 0x2f, 0x67, 0x61, 0x00, 0xaf,
+		0x86, 0xf2, 0xbf, 0x59, 0x04, 0x11, 0xb6, 0x33, 0xa4, 0x30,
+		0x15, 0x10, 0x0a, 0x42, 0x18, 0xf8, 0x17, 0xd9, 0x07, 0x22,
+		0x19, 0x10,
+		},
+
+	/*  8 MHz bandwidth */
+		{
+		0x09, 0xf6, 0xd2, 0xa7, 0x9a, 0xc9, 0x27, 0x77, 0x06, 0xbf,
+		0xec, 0xf4, 0x4f, 0x0b, 0xfc, 0x01, 0x63, 0x35, 0x54, 0xa7,
+		0x16, 0x66, 0x08, 0xb4, 0x19, 0x6e, 0x19, 0x65, 0x05, 0xc8,
+		0x19, 0xe0,
+		},
+	};
+
+
+	dbg("%s: frequency=%d bandwidth_hz=%d inversion=%d", __func__,
+		c->frequency, c->bandwidth_hz, c->inversion);
+
+
+	/* program tuner */
+	if (fe->ops.tuner_ops.set_params)
+		fe->ops.tuner_ops.set_params(fe);
+
+
+	switch (c->bandwidth_hz) {
+	case 6000000:
+		i = 0;
+		bw_mode = 48000000;
+		break;
+	case 7000000:
+		i = 1;
+		bw_mode = 56000000;
+		break;
+	case 8000000:
+		i = 2;
+		bw_mode = 64000000;
+		break;
+	default:
+		dbg("invalid bandwidth");
+		return -EINVAL;
+	}
+
+	for (j = 0; j<  sizeof(bw_params[j]); j++) {
+		ret = rtl2832_wr_regs(priv, 0x1c+j, 1,&bw_params[i][j], 1);
+		if (ret)
+			goto err;
+	}
+
+	/* calculate and set resample ratio
+	* RSAMP_RATIO = floor(CrystalFreqHz * 7 * pow(2, 22)
+	*	/ ConstWithBandwidthMode)
+	*/
+	num = priv->cfg.xtal * 7;
+	num *= 0x400000;
+	num = div_u64(num, bw_mode);
+	resamp_ratio =  num&  0x3ffffff;
+	ret = rtl2832_wr_demod_reg(priv, DVBT_RSAMP_RATIO, resamp_ratio);
+	if (ret)
+		goto err;
+
+	/* calculate and set cfreq off ratio
+	* CFREQ_OFF_RATIO = - floor(ConstWithBandwidthMode * pow(2, 20)
+	*	/ (CrystalFreqHz * 7))
+	*/
+	num = bw_mode<<  20;
+	num2 = priv->cfg.xtal * 7;
+	num = div_u64(num, num2);
+	num = -num;
+	cfreq_off_ratio = num&  0xfffff;
+	ret = rtl2832_wr_demod_reg(priv, DVBT_CFREQ_OFF_RATIO, cfreq_off_ratio);
+	if (ret)
+		goto err;
+
+
+	/* soft reset */
+	ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x1);
+	if (ret)
+		goto err;
+
+	ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x0);
+	if (ret)
+		goto err;
+
+	return ret;
+err:
+	info("%s: failed=%d", __func__, ret);
+	return ret;
+}
+
+static int rtl2832_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+	struct rtl2832_priv *priv = fe->demodulator_priv;
+	int ret;
+	u32 tmp;
+	*status = 0;
+
+
+	dbg("%s", __func__);
+	if (priv->sleeping)
+		return 0;
+
+	ret = rtl2832_rd_demod_reg(priv, DVBT_FSM_STAGE,&tmp);
+	if (ret)
+		goto err;
+
+	if (tmp == 11) {
+		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
+				FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
+	}
+	/* TODO find out if this is also true for rtl2832? */
+	/*else if (tmp == 10) {
+		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
+				FE_HAS_VITERBI;
+	}*/
+
+	return ret;
+err:
+	info("%s: failed=%d", __func__, ret);
+	return ret;
+}
+
+static int rtl2832_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	*snr = 0;
+	return 0;
+}
+
+static int rtl2832_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	*ber = 0;
+	return 0;
+}
+
+static int rtl2832_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+	*ucblocks = 0;
+	return 0;
+}
+
+
+static int rtl2832_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+	*strength = 0;
+	return 0;
+}
+
+static struct dvb_frontend_ops rtl2832_ops;
+
+static void rtl2832_release(struct dvb_frontend *fe)
+{
+	struct rtl2832_priv *priv = fe->demodulator_priv;
+
+	dbg("%s", __func__);
+	kfree(priv);
+}
+
+struct dvb_frontend *rtl2832_attach(const struct rtl2832_config *cfg,
+	struct i2c_adapter *i2c)
+{
+	struct rtl2832_priv *priv = NULL;
+	int ret = 0;
+	u8 tmp;
+
+	dbg("%s", __func__);
+
+	/* allocate memory for the internal state */
+	priv = kzalloc(sizeof(struct rtl2832_priv), GFP_KERNEL);
+	if (priv == NULL)
+		goto err;
+
+	/* setup the priv */
+	priv->i2c = i2c;
+	priv->tuner = cfg->tuner;
+	memcpy(&priv->cfg, cfg, sizeof(struct rtl2832_config));
+
+	/* check if the demod is there */
+	ret = rtl2832_rd_reg(priv, 0x00, 0x0,&tmp);
+	if (ret)
+		goto err;
+
+	/* create dvb_frontend */
+	memcpy(&priv->fe.ops,&rtl2832_ops, sizeof(struct dvb_frontend_ops));
+	priv->fe.demodulator_priv = priv;
+
+	/* TODO implement sleep mode */
+	priv->sleeping = true;
+
+	return&priv->fe;
+err:
+	dbg("%s: failed=%d", __func__, ret);
+	kfree(priv);
+	return NULL;
+}
+EXPORT_SYMBOL(rtl2832_attach);
+
+static struct dvb_frontend_ops rtl2832_ops = {
+	.delsys = { SYS_DVBT },
+	.info = {
+		.name = "Realtek RTL2832 (DVB-T)",
+		.frequency_min	  = 174000000,
+		.frequency_max	  = 862000000,
+		.frequency_stepsize = 166667,
+		.caps = FE_CAN_FEC_1_2 |
+			FE_CAN_FEC_2_3 |
+			FE_CAN_FEC_3_4 |
+			FE_CAN_FEC_5_6 |
+			FE_CAN_FEC_7_8 |
+			FE_CAN_FEC_AUTO |
+			FE_CAN_QPSK |
+			FE_CAN_QAM_16 |
+			FE_CAN_QAM_64 |
+			FE_CAN_QAM_AUTO |
+			FE_CAN_TRANSMISSION_MODE_AUTO |
+			FE_CAN_GUARD_INTERVAL_AUTO |
+			FE_CAN_HIERARCHY_AUTO |
+			FE_CAN_RECOVER |
+			FE_CAN_MUTE_TS
+	 },
+
+	.release = rtl2832_release,
+
+	.init = rtl2832_init,
+	.sleep = rtl2832_sleep,
+
+	.get_tune_settings = rtl2832_get_tune_settings,
+
+	.set_frontend = rtl2832_set_frontend,
+
+	.read_status = rtl2832_read_status,
+	.read_snr = rtl2832_read_snr,
+	.read_ber = rtl2832_read_ber,
+	.read_ucblocks = rtl2832_read_ucblocks,
+	.read_signal_strength = rtl2832_read_signal_strength,
+	.i2c_gate_ctrl = rtl2832_i2c_gate_ctrl,
+};
+
+MODULE_AUTHOR("Thomas Mair<mair.thomas86@xxxxxxxxx>");
+MODULE_DESCRIPTION("Realtek RTL2832 DVB-T demodulator driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.4");
diff --git a/drivers/media/dvb/frontends/rtl2832.h b/drivers/media/dvb/frontends/rtl2832.h
new file mode 100644
index 0000000..d94dc9a
--- /dev/null
+++ b/drivers/media/dvb/frontends/rtl2832.h
@@ -0,0 +1,74 @@
+/*
+ * Realtek RTL2832 DVB-T demodulator driver
+ *
+ * Copyright (C) 2012 Thomas Mair<thomas.mair86@xxxxxxxxx>
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License along
+ *	with this program; if not, write to the Free Software Foundation, Inc.,
+ *	51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef RTL2832_H
+#define RTL2832_H
+
+#include<linux/dvb/frontend.h>
+
+struct rtl2832_config {
+	/*
+	 * Demodulator I2C address.
+	 */
+	u8 i2c_addr;
+
+	/*
+	 * Xtal frequency.
+	 * Hz
+	 * 4000000, 16000000, 25000000, 28800000
+	 */
+	u32 xtal;
+
+	/*
+	 * IFs for all used modes.
+	 * Hz
+	 * 4570000, 4571429, 36000000, 36125000, 36166667, 44000000
+	 */
+	u32 if_dvbt;
+
+	/*
+	 */
+	u8 tuner;
+};
+
+
+#if defined(CONFIG_DVB_RTL2832) || \
+	(defined(CONFIG_DVB_RTL2832_MODULE)&&  defined(MODULE))
+extern struct dvb_frontend *rtl2832_attach(
+	const struct rtl2832_config *cfg,
+	struct i2c_adapter *i2c
+);
+
+extern struct i2c_adapter *rtl2832_get_tuner_i2c_adapter(
+	struct dvb_frontend *fe
+);
+#else
+static inline struct dvb_frontend *rtl2832_attach(
+	const struct rtl2832_config *config,
+	struct i2c_adapter *i2c
+)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif
+
+
+#endif /* RTL2832_H */
diff --git a/drivers/media/dvb/frontends/rtl2832_priv.h b/drivers/media/dvb/frontends/rtl2832_priv.h
new file mode 100644
index 0000000..3e52674
--- /dev/null
+++ b/drivers/media/dvb/frontends/rtl2832_priv.h
@@ -0,0 +1,258 @@
+/*
+ * Realtek RTL2832 DVB-T demodulator driver
+ *
+ * Copyright (C) 2012 Thomas Mair<thomas.mair86@xxxxxxxxx>
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License along
+ *	with this program; if not, write to the Free Software Foundation, Inc.,
+ *	51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef RTL2832_PRIV_H
+#define RTL2832_PRIV_H
+
+#include "dvb_frontend.h"
+#include "rtl2832.h"
+
+#define LOG_PREFIX "rtl2832"
+
+#undef dbg
+#define dbg(f, arg...) \
+	if (rtl2832_debug) \
+		printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)

ERROR: Macros with complex values should be enclosed in parenthesis
#30: FILE: media/dvb/frontends/rtl2832_priv.h:30:
+#define dbg(f, arg...) \
+	if (rtl2832_debug) \
+		printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)

+#undef err
+#define err(f, arg...)  printk(KERN_ERR	LOG_PREFIX": " f "\n" , ## arg)
+#undef info
+#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)
+#undef warn
+#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg)
+
+struct rtl2832_priv {
+	struct i2c_adapter *i2c;
+	struct dvb_frontend fe;
+	struct rtl2832_config cfg;
+
+	bool i2c_gate_state;
+	bool sleeping;
+
+	u8 tuner;
+	u8 page; /* active register page */
+};
+
+struct rtl2832_reg_entry {
+	u8 page;
+	u8 start_address;
+	u8 msb;
+	u8 lsb;
+};
+
+struct rtl2832_reg_value {
+	int reg;

As this reg is enum I wonder if it is possible to use enum as a type (enum reg)? Still I am not sure about it and I dont like to test it :)

+	u32 value;
+};
+
+
+/* Demod register bit names */
+enum DVBT_REG_BIT_NAME {
+	DVBT_SOFT_RST,
+	DVBT_IIC_REPEAT,
+	DVBT_TR_WAIT_MIN_8K,
+	DVBT_RSD_BER_FAIL_VAL,
+	DVBT_EN_BK_TRK,
+	DVBT_REG_PI,
+	DVBT_REG_PFREQ_1_0,
+	DVBT_PD_DA8,
+	DVBT_LOCK_TH,
+	DVBT_BER_PASS_SCAL,
+	DVBT_CE_FFSM_BYPASS,
+	DVBT_ALPHAIIR_N,
+	DVBT_ALPHAIIR_DIF,
+	DVBT_EN_TRK_SPAN,
+	DVBT_LOCK_TH_LEN,
+	DVBT_CCI_THRE,
+	DVBT_CCI_MON_SCAL,
+	DVBT_CCI_M0,
+	DVBT_CCI_M1,
+	DVBT_CCI_M2,
+	DVBT_CCI_M3,
+	DVBT_SPEC_INIT_0,
+	DVBT_SPEC_INIT_1,
+	DVBT_SPEC_INIT_2,
+	DVBT_AD_EN_REG,
+	DVBT_AD_EN_REG1,
+	DVBT_EN_BBIN,
+	DVBT_MGD_THD0,
+	DVBT_MGD_THD1,
+	DVBT_MGD_THD2,
+	DVBT_MGD_THD3,
+	DVBT_MGD_THD4,
+	DVBT_MGD_THD5,
+	DVBT_MGD_THD6,
+	DVBT_MGD_THD7,
+	DVBT_EN_CACQ_NOTCH,
+	DVBT_AD_AV_REF,
+	DVBT_PIP_ON,
+	DVBT_SCALE1_B92,
+	DVBT_SCALE1_B93,
+	DVBT_SCALE1_BA7,
+	DVBT_SCALE1_BA9,
+	DVBT_SCALE1_BAA,
+	DVBT_SCALE1_BAB,
+	DVBT_SCALE1_BAC,
+	DVBT_SCALE1_BB0,
+	DVBT_SCALE1_BB1,
+	DVBT_KB_P1,
+	DVBT_KB_P2,
+	DVBT_KB_P3,
+	DVBT_OPT_ADC_IQ,
+	DVBT_AD_AVI,
+	DVBT_AD_AVQ,
+	DVBT_K1_CR_STEP12,
+	DVBT_TRK_KS_P2,
+	DVBT_TRK_KS_I2,
+	DVBT_TR_THD_SET2,
+	DVBT_TRK_KC_P2,
+	DVBT_TRK_KC_I2,
+	DVBT_CR_THD_SET2,
+	DVBT_PSET_IFFREQ,
+	DVBT_SPEC_INV,
+	DVBT_BW_INDEX,
+	DVBT_RSAMP_RATIO,
+	DVBT_CFREQ_OFF_RATIO,
+	DVBT_FSM_STAGE,
+	DVBT_RX_CONSTEL,
+	DVBT_RX_HIER,
+	DVBT_RX_C_RATE_LP,
+	DVBT_RX_C_RATE_HP,
+	DVBT_GI_IDX,
+	DVBT_FFT_MODE_IDX,
+	DVBT_RSD_BER_EST,
+	DVBT_CE_EST_EVM,
+	DVBT_RF_AGC_VAL,
+	DVBT_IF_AGC_VAL,
+	DVBT_DAGC_VAL,
+	DVBT_SFREQ_OFF,
+	DVBT_CFREQ_OFF,
+	DVBT_POLAR_RF_AGC,
+	DVBT_POLAR_IF_AGC,
+	DVBT_AAGC_HOLD,
+	DVBT_EN_RF_AGC,
+	DVBT_EN_IF_AGC,
+	DVBT_IF_AGC_MIN,
+	DVBT_IF_AGC_MAX,
+	DVBT_RF_AGC_MIN,
+	DVBT_RF_AGC_MAX,
+	DVBT_IF_AGC_MAN,
+	DVBT_IF_AGC_MAN_VAL,
+	DVBT_RF_AGC_MAN,
+	DVBT_RF_AGC_MAN_VAL,
+	DVBT_DAGC_TRG_VAL,
+	DVBT_AGC_TARG_VAL,
+	DVBT_LOOP_GAIN_3_0,
+	DVBT_LOOP_GAIN_4,
+	DVBT_VTOP,
+	DVBT_KRF,
+	DVBT_AGC_TARG_VAL_0,
+	DVBT_AGC_TARG_VAL_8_1,
+	DVBT_AAGC_LOOP_GAIN,
+	DVBT_LOOP_GAIN2_3_0,
+	DVBT_LOOP_GAIN2_4,
+	DVBT_LOOP_GAIN3,
+	DVBT_VTOP1,
+	DVBT_VTOP2,
+	DVBT_VTOP3,
+	DVBT_KRF1,
+	DVBT_KRF2,
+	DVBT_KRF3,
+	DVBT_KRF4,
+	DVBT_EN_GI_PGA,
+	DVBT_THD_LOCK_UP,
+	DVBT_THD_LOCK_DW,
+	DVBT_THD_UP1,
+	DVBT_THD_DW1,
+	DVBT_INTER_CNT_LEN,
+	DVBT_GI_PGA_STATE,
+	DVBT_EN_AGC_PGA,
+	DVBT_CKOUTPAR,
+	DVBT_CKOUT_PWR,
+	DVBT_SYNC_DUR,
+	DVBT_ERR_DUR,
+	DVBT_SYNC_LVL,
+	DVBT_ERR_LVL,
+	DVBT_VAL_LVL,
+	DVBT_SERIAL,
+	DVBT_SER_LSB,
+	DVBT_CDIV_PH0,
+	DVBT_CDIV_PH1,
+	DVBT_MPEG_IO_OPT_2_2,
+	DVBT_MPEG_IO_OPT_1_0,
+	DVBT_CKOUTPAR_PIP,
+	DVBT_CKOUT_PWR_PIP,
+	DVBT_SYNC_LVL_PIP,
+	DVBT_ERR_LVL_PIP,
+	DVBT_VAL_LVL_PIP,
+	DVBT_CKOUTPAR_PID,
+	DVBT_CKOUT_PWR_PID,
+	DVBT_SYNC_LVL_PID,
+	DVBT_ERR_LVL_PID,
+	DVBT_VAL_LVL_PID,
+	DVBT_SM_PASS,
+	DVBT_UPDATE_REG_2,
+	DVBT_BTHD_P3,
+	DVBT_BTHD_D3,
+	DVBT_FUNC4_REG0,
+	DVBT_FUNC4_REG1,
+	DVBT_FUNC4_REG2,
+	DVBT_FUNC4_REG3,
+	DVBT_FUNC4_REG4,
+	DVBT_FUNC4_REG5,
+	DVBT_FUNC4_REG6,
+	DVBT_FUNC4_REG7,
+	DVBT_FUNC4_REG8,
+	DVBT_FUNC4_REG9,
+	DVBT_FUNC4_REG10,
+	DVBT_FUNC5_REG0,
+	DVBT_FUNC5_REG1,
+	DVBT_FUNC5_REG2,
+	DVBT_FUNC5_REG3,
+	DVBT_FUNC5_REG4,
+	DVBT_FUNC5_REG5,
+	DVBT_FUNC5_REG6,
+	DVBT_FUNC5_REG7,
+	DVBT_FUNC5_REG8,
+	DVBT_FUNC5_REG9,
+	DVBT_FUNC5_REG10,
+	DVBT_FUNC5_REG11,
+	DVBT_FUNC5_REG12,
+	DVBT_FUNC5_REG13,
+	DVBT_FUNC5_REG14,
+	DVBT_FUNC5_REG15,
+	DVBT_FUNC5_REG16,
+	DVBT_FUNC5_REG17,
+	DVBT_FUNC5_REG18,
+	DVBT_AD7_SETTING,
+	DVBT_RSSI_R,
+	DVBT_ACI_DET_IND,
+	DVBT_REG_MON,
+	DVBT_REG_MONSEL,
+	DVBT_REG_GPE,
+	DVBT_REG_GPO,
+	DVBT_REG_4MSEL,
+	DVBT_TEST_REG_1,
+	DVBT_TEST_REG_2,
+	DVBT_TEST_REG_3,
+	DVBT_TEST_REG_4,
+	DVBT_REG_BIT_NAME_ITEM_TERMINATOR,
+};
+
+#endif /* RTL2832_PRIV_H */


--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux