On 05/13/2012 12:59 PM, Antti Palosaari wrote: > On 13.05.2012 11:16, poma wrote: >> On 05/12/2012 11:11 AM, Hans-Frieder Vogt wrote: >>> Changes compared to version 0.5 of driver (sent 6 May): >>> - Initial implementation of get_rf_strength function. >>> >>> Signed-off-by: Hans-Frieder Vogt<hfvogt@xxxxxxx> >>> >>> fc0012.c | 72 >>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++- >>> 1 file changed, 71 insertions(+), 1 deletion(-) >>> >>> diff -up --new-file --recursive >>> a/drivers/media/common/tuners/fc0012.c >>> b/drivers/media/common/tuners/fc0012.c >>> --- a/drivers/media/common/tuners/fc0012.c 2012-05-12 >>> 10:53:55.330058209 +0200 >>> +++ b/drivers/media/common/tuners/fc0012.c 2012-05-09 >>> 23:27:37.781193720 +0200 >>> @@ -343,6 +343,74 @@ static int fc0012_get_bandwidth(struct d >>> return 0; >>> } >>> >>> +#define INPUT_ADC_LEVEL -8 >>> + >>> +static int fc0012_get_rf_strength(struct dvb_frontend *fe, u16 >>> *strength) >>> +{ >>> + struct fc0012_priv *priv = fe->tuner_priv; >>> + int ret; >>> + unsigned char tmp; >>> + int int_temp, lna_gain, int_lna, tot_agc_gain, power; >>> + const int fc0012_lna_gain_table[] = { >>> + /* low gain */ >>> + -63, -58, -99, -73, >>> + -63, -65, -54, -60, >>> + /* middle gain */ >>> + 71, 70, 68, 67, >>> + 65, 63, 61, 58, >>> + /* high gain */ >>> + 197, 191, 188, 186, >>> + 184, 182, 181, 179, >>> + }; >>> + >>> + if (fe->ops.i2c_gate_ctrl) >>> + fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */ >>> + >>> + ret = fc0012_writereg(priv, 0x12, 0x00); >>> + if (ret) >>> + goto err; >>> + >>> + ret = fc0012_readreg(priv, 0x12,&tmp); >>> + if (ret) >>> + goto err; >>> + int_temp = tmp; >>> + >>> + ret = fc0012_readreg(priv, 0x13,&tmp); >>> + if (ret) >>> + goto err; >>> + lna_gain = tmp& 0x1f; >>> + >>> + if (fe->ops.i2c_gate_ctrl) >>> + fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ >>> + >>> + if (lna_gain< ARRAY_SIZE(fc0012_lna_gain_table)) { >>> + int_lna = fc0012_lna_gain_table[lna_gain]; >>> + tot_agc_gain = (abs((int_temp>> 5) - 7) - 2 + >>> + (int_temp& 0x1f)) * 2; >>> + power = INPUT_ADC_LEVEL - tot_agc_gain - int_lna / 10; >>> + >>> + if (power>= 45) >>> + *strength = 255; /* 100% */ >>> + else if (power< -95) >>> + *strength = 0; >>> + else >>> + *strength = (power + 95) * 255 / 140; >>> + >>> + *strength |= *strength<< 8; >>> + } else { >>> + ret = -1; >>> + } >>> + >>> + goto exit; >>> + >>> +err: >>> + if (fe->ops.i2c_gate_ctrl) >>> + fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ >>> +exit: >>> + if (ret) >>> + warn("%s: failed: %d", __func__, ret); >>> + return ret; >>> +} >>> >>> static const struct dvb_tuner_ops fc0012_tuner_ops = { >>> .info = { >>> @@ -363,6 +431,8 @@ static const struct dvb_tuner_ops fc0012 >>> .get_frequency = fc0012_get_frequency, >>> .get_if_frequency = fc0012_get_if_frequency, >>> .get_bandwidth = fc0012_get_bandwidth, >>> + >>> + .get_rf_strength = fc0012_get_rf_strength, >>> }; >>> >>> struct dvb_frontend *fc0012_attach(struct dvb_frontend *fe, >>> @@ -394,4 +464,4 @@ EXPORT_SYMBOL(fc0012_attach); >>> MODULE_DESCRIPTION("Fitipower FC0012 silicon tuner driver"); >>> MODULE_AUTHOR("Hans-Frieder Vogt<hfvogt@xxxxxxx>"); >>> MODULE_LICENSE("GPL"); >>> -MODULE_VERSION("0.5"); >>> +MODULE_VERSION("0.6"); >>> >> >> rtl2832/fc0012: >> >> femon -H -a 2 -c 10: >> FE: Realtek RTL2832 (DVB-T) (DVBT) >> status SCVYL | signal 23% | snr 79% | ber 0 | unc 100 | FE_HAS_LOCK >> status SCVYL | signal 23% | snr 79% | ber 0 | unc 100 | FE_HAS_LOCK >> status SCVYL | signal 23% | snr 79% | ber 0 | unc 100 | FE_HAS_LOCK >> status SCVYL | signal 23% | snr 79% | ber 0 | unc 100 | FE_HAS_LOCK >> status SCVYL | signal 23% | snr 82% | ber 0 | unc 100 | FE_HAS_LOCK >> // without tzap/lock: >> Problem retrieving frontend information: Remote I/O error >> status | signal 23% | snr 82% | ber 0 | unc 100 | >> Problem retrieving frontend information: Remote I/O error >> status | signal 23% | snr 82% | ber 0 | unc 100 | >> Problem retrieving frontend information: Remote I/O error >> status | signal 23% | snr 82% | ber 0 | unc 100 | >> Problem retrieving frontend information: Remote I/O error >> status | signal 23% | snr 82% | ber 0 | unc 100 | >> Problem retrieving frontend information: Remote I/O error >> status | signal 23% | snr 82% | ber 0 | unc 100 | >> >> dmesg: >> […] >> // without tzap/lock: >> rtl2832: i2c rd failed=-32 reg=4e len=2 >> rtl2832: rtl2832_read_ber: failed=-121 >> rtl2832: i2c rd failed=-32 reg=01 len=1 >> fc0012: I2C write reg failed, reg: 12, val: 00 >> fc0012: fc0012_get_rf_strength: failed: -121 >> rtl2832: i2c rd failed=-32 reg=51 len=1 >> rtl2832: rtl2832_read_snr: failed=-121 >> rtl2832: i2c rd failed=-32 reg=51 len=1 >> rtl2832: rtl2832_read_ucblocks: failed=-121 >> >> >> Comparable readings - af9013/mxl5007t: >> >> femon -H -a 1 -c 10 >> FE: Afatech AF9013 (DVBT) >> status SCVYL | signal 55% | snr 0% | ber 0 | unc 0 | FE_HAS_LOCK >> status SCVYL | signal 55% | snr 0% | ber 0 | unc 0 | FE_HAS_LOCK >> status SCVYL | signal 55% | snr 0% | ber 0 | unc 0 | FE_HAS_LOCK >> status SCVYL | signal 55% | snr 0% | ber 0 | unc 0 | FE_HAS_LOCK >> status SCVYL | signal 55% | snr 0% | ber 0 | unc 0 | FE_HAS_LOCK >> // without tzap/lock: >> status SCV | signal 55% | snr 0% | ber 0 | unc 0 | >> status SCV | signal 55% | snr 0% | ber 0 | unc 0 | >> status SCV | signal 55% | snr 0% | ber 0 | unc 0 | >> status SCV | signal 55% | snr 0% | ber 0 | unc 0 | >> status SCV | signal 55% | snr 0% | ber 0 | unc 0 | >> >> dmesg: >> […] >> // without tzap/lock: >> 'NONE' >> >> >> Is it necessary to populate a log buffer while frontend not locking? > > It is not nice and should not happen. > But let me explain issues behind it. It fails since device is put sleep > in that case those chips even does not respond to control messages. > RTL2830 has similar problem - I resolved it just adding some clue to > demod driver not access to the hw when when it is sleeping. > > IMHO whole issues is DVB CORE issue as it should not pass any calls to > the individual chip drivers when device is clearly in the state those > calls are invalid. > > For example when we are sleeping only legal call is .init() in order to > wake it up. Also BER and UCB are invalid until LOCK is gained. > > I have already listed those issues as a my GSoC DVB CORE enhancements - > so I think it is not worth to make any chip driver hacks in that case. > > regards > Antti Fair enough. May the Force be with you, poma -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html