Hi Hans, I quickly looked at your patches about the changes for the JPEG quality, and I have some remarks. Indeed, as I don't have any zc3xx webcam nor a lot of documentation about the zc3xx bridge, my information come only from USB trace analysis, and I am not sure there are fully valid. - the register 08 always have values 0..3 (bits 0 and 1). I never saw the bits 2 or 3 set when the frame transfer regulation is active. - when frame overflows occur or disappear, the register 07 is always updated before the register 08. There are bug fixes about the setting of the registers 07 and 08 in my gspca test tarball 2.15.17. - as it is (read the register 11 every 100 ms), the work queue is usefull when there is no polling of the snapshot button, because the frame overflow is reported as the bit 0 in the forth byte (data[3]) of the interrupt messages. In fact, in the traces I have, only the webcams which don't do button polling by interrupt messages have to read the register 11. Why only when the sensor is hv7131r or pas202b? I don't know. But with gspca, the polling is always active when CONFIG_INPUT is defined. Regards. -- Ken ar c'hentañ | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
