The driver uses the ctrl value passed in as a bool to determine whether
to enable auto-exposure, but the auto-exposure setting is defined as an
enum where AUTO has a value of 0 and MANUAL has a value of 1. This leads
to a reversed logic where if you send in AUTO, it actually sets manual
exposure and vice-versa.
Signed-off-by: Kartik Mohta <kartikmohta@xxxxxxxxx>
---
drivers/media/video/mt9v032.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/media/video/mt9v032.c b/drivers/media/video/mt9v032.c
index 75e253a..8ea8737 100644
--- a/drivers/media/video/mt9v032.c
+++ b/drivers/media/video/mt9v032.c
@@ -470,6 +470,7 @@ static int mt9v032_s_ctrl(struct v4l2_ctrl *ctrl)
container_of(ctrl->handler, struct mt9v032, ctrls);
struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev);
u16 data;
+ int aec_value;
switch (ctrl->id) {
case V4L2_CID_AUTOGAIN:
@@ -480,8 +481,13 @@ static int mt9v032_s_ctrl(struct v4l2_ctrl *ctrl)
return mt9v032_write(client, MT9V032_ANALOG_GAIN, ctrl->val);
case V4L2_CID_EXPOSURE_AUTO:
+ if(ctrl->val == V4L2_EXPOSURE_MANUAL)
+ aec_value = 0;
+ else
+ aec_value = 1;
+
return mt9v032_update_aec_agc(mt9v032, MT9V032_AEC_ENABLE,
- ctrl->val);
+ aec_value);
case V4L2_CID_EXPOSURE:
return mt9v032_write(client, MT9V032_TOTAL_SHUTTER_WIDTH,
--
1.7.10.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
