Signed-off-by: Sergio Aguirre <saaguirre@xxxxxx> --- drivers/media/video/Kconfig | 6 + drivers/media/video/Makefile | 1 + drivers/media/video/ov5650.c | 733 ++++++++++++++++++++++++++++++++++++++++++ include/media/ov5650.h | 10 + 4 files changed, 750 insertions(+), 0 deletions(-) create mode 100644 drivers/media/video/ov5650.c create mode 100644 include/media/ov5650.h diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index cc76652..e4d1875 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -486,6 +486,12 @@ config VIDEO_OV5640 help This is a ov5640 camera driver +config VIDEO_OV5650 + tristate "OmniVision OV5650 sensor support" + depends on I2C && VIDEO_V4L2 + help + This is a ov5650 camera driver + config VIDEO_VS6624 tristate "ST VS6624 sensor support" depends on VIDEO_V4L2 && I2C diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index da40ab3..01945c1 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o obj-$(CONFIG_VIDEO_OV7670) += ov7670.o obj-$(CONFIG_VIDEO_OV5640) += ov5640.o +obj-$(CONFIG_VIDEO_OV5650) += ov5650.o obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o diff --git a/drivers/media/video/ov5650.c b/drivers/media/video/ov5650.c new file mode 100644 index 0000000..33ab148 --- /dev/null +++ b/drivers/media/video/ov5650.c @@ -0,0 +1,733 @@ +/* + * OmniVision OV5650 sensor driver + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/videodev2.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/log2.h> +#include <linux/delay.h> +#include <linux/module.h> + +#include <media/v4l2-device.h> +#include <media/v4l2-subdev.h> +#include <media/v4l2-ctrls.h> + +#include <media/ov5650.h> + +/* OV5650 has only one fixed colorspace per pixelcode */ +struct ov5650_datafmt { + enum v4l2_mbus_pixelcode code; + enum v4l2_colorspace colorspace; +}; + +enum ov5650_size { + OV5650_SIZE_5MP, + OV5650_SIZE_LAST, +}; + +static const struct v4l2_frmsize_discrete ov5650_frmsizes[OV5650_SIZE_LAST] = { + { 2592, 1944 }, +}; + +/* Find a frame size in an array */ +static int ov5650_find_framesize(u32 width, u32 height) +{ + int i; + + for (i = 0; i < OV5650_SIZE_LAST; i++) { + if ((ov5650_frmsizes[i].width >= width) && + (ov5650_frmsizes[i].height >= height)) + break; + } + + /* If not found, select biggest */ + if (i >= OV5650_SIZE_LAST) + i = OV5650_SIZE_LAST - 1; + + return i; +} + +struct ov5650 { + struct v4l2_subdev subdev; + struct media_pad pad; + + struct v4l2_mbus_framefmt format; + + struct v4l2_ctrl_handler ctrl_handler; + + const struct ov5650_platform_data *pdata; + + struct v4l2_ctrl *pixel_rate; +}; + +static inline struct ov5650 *to_ov5650(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ov5650, subdev); +} + +/** + * struct ov5650_reg - ov5650 register format + * @reg: 16-bit offset to register + * @val: 8/16/32-bit register value + * @length: length of the register + * + * Define a structure for OV5650 register initialization values + */ +struct ov5650_reg { + u16 reg; + u8 val; +}; + +static const struct ov5650_reg configscript_common1[] = { + { 0x3103, 0x93 }, + { 0x3b07, 0x0c }, + { 0x3017, 0xff }, + { 0x3018, 0xfc }, + { 0x3706, 0x41 }, + { 0x3703, 0xe6 }, + { 0x3613, 0x44 }, + { 0x3630, 0x22 }, + { 0x3605, 0x04 }, + { 0x3606, 0x3f }, + { 0x3712, 0x13 }, + { 0x370e, 0x00 }, + { 0x370b, 0x40 }, + { 0x3600, 0x54 }, + { 0x3601, 0x05 }, + { 0x3713, 0x22 }, + { 0x3714, 0x27 }, + { 0x3631, 0x22 }, + { 0x3612, 0x1a }, + { 0x3604, 0x40 }, + { 0x3705, 0xda }, + { 0x370a, 0x80 }, + { 0x370c, 0x00 }, + { 0x3710, 0x28 }, + { 0x3702, 0x3a }, + { 0x3704, 0x18 }, + { 0x3a18, 0x00 }, + { 0x3a19, 0xf8 }, + { 0x3a00, 0x38 }, +}; + +static const struct ov5650_reg configscript_common2[] = { + { 0x3a08, 0x12 }, + { 0x3a09, 0x70 }, + { 0x3a0a, 0x0f }, + { 0x3a0b, 0x60 }, + { 0x3a0d, 0x06 }, + { 0x3a0e, 0x06 }, + { 0x3a13, 0x54 }, + { 0x3815, 0x82 }, + { 0x5059, 0x80 }, + { 0x505a, 0x0a }, + { 0x505b, 0x2e }, + { 0x3a1a, 0x06 }, + { 0x3503, 0x00 }, + { 0x3623, 0x01 }, + { 0x3633, 0x24 }, + { 0x3c01, 0x34 }, + { 0x3c04, 0x28 }, + { 0x3c05, 0x98 }, + { 0x3c07, 0x07 }, + { 0x3c09, 0xc2 }, + { 0x4000, 0x05 }, + { 0x401d, 0x28 }, + { 0x4001, 0x02 }, + { 0x401c, 0x46 }, + { 0x5046, 0x01 }, + { 0x3836, 0x41 }, + { 0x505f, 0x04 }, + { 0x5000, 0x00 }, + { 0x5001, 0x00 }, + { 0x5002, 0x00 }, + { 0x503d, 0x00 }, + { 0x5901, 0x00 }, + { 0x585a, 0x01 }, + { 0x585b, 0x2c }, + { 0x585c, 0x01 }, + { 0x585d, 0x93 }, + { 0x585e, 0x01 }, + { 0x585f, 0x90 }, + { 0x5860, 0x01 }, + { 0x5861, 0x0d }, + { 0x5180, 0xc0 }, + { 0x5184, 0x00 }, + { 0x470a, 0x00 }, + { 0x470b, 0x00 }, + { 0x470c, 0x00 }, + { 0x3603, 0xa7 }, + { 0x3615, 0x50 }, + { 0x3632, 0x55 }, + { 0x3620, 0x56 }, + { 0x3621, 0x2f }, + { 0x381a, 0x3c }, + { 0x3818, 0xc0 }, + { 0x3631, 0x36 }, + { 0x3632, 0x5f }, + { 0x3711, 0x24 }, + { 0x401f, 0x03 }, + { 0x3007, 0x3b }, + { 0x4801, 0x0f }, + { 0x3003, 0x03 }, + { 0x300e, 0x0c }, + { 0x4803, 0x50 }, + { 0x4800, 0x04 }, + { 0x3815, 0x82 }, + { 0x3003, 0x01 }, +}; + +static const struct ov5650_reg timing_cfg[][16] = { + [OV5650_SIZE_5MP] = { + { 0x3800, 0x02 }, /* HREF Start Point: 596 */ + { 0x3801, 0x54 }, + + { 0x3803, 0x0c }, /* VREF Start Point: 12 */ + + { 0x3804, 0x0a }, /* HREF Width: 2592 */ + { 0x3805, 0x20 }, + + { 0x3806, 0x07 }, /* HREF Height: 1944 */ + { 0x3807, 0x98 }, + + { 0x3808, 0x0a }, /* Horizontal Output Size: 2592 */ + { 0x3809, 0x20 }, + + { 0x380a, 0x07 }, /* Vertical Output Size: 1944 */ + { 0x380b, 0x98 }, + + { 0x380c, 0x0c }, /* Total Horizontal Size: 3252 */ + { 0x380d, 0xb4 }, + + { 0x380e, 0x07 }, /* Total Vertical Size: 1968 */ + { 0x380f, 0xb0 }, + + { 0x3810, 0x40 }, + }, +}; + +/** + * ov5650_reg_read - Read a value from a register in an ov5650 sensor device + * @client: i2c driver client structure + * @reg: register address / offset + * @val: stores the value that gets read + * + * Read a value from a register in an ov5650 sensor device. + * The value is returned in 'val'. + * Returns zero if successful, or non-zero otherwise. + */ +static int ov5650_reg_read(struct i2c_client *client, u16 reg, u8 *val) +{ + int ret; + u8 data[2] = {0}; + struct i2c_msg msg = { + .addr = client->addr, + .flags = 0, + .len = 2, + .buf = data, + }; + + data[0] = (u8)(reg >> 8); + data[1] = (u8)(reg & 0xff); + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret < 0) + goto err; + + msg.flags = I2C_M_RD; + msg.len = 1; + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret < 0) + goto err; + + *val = data[0]; + return 0; + +err: + dev_err(&client->dev, "Failed reading register 0x%02x!\n", reg); + return ret; +} + +/** + * Write a value to a register in ov5650 sensor device. + * @client: i2c driver client structure. + * @reg: Address of the register to read value from. + * @val: Value to be written to a specific register. + * Returns zero if successful, or non-zero otherwise. + */ +static int ov5650_reg_write(struct i2c_client *client, u16 reg, u8 val) +{ + int ret; + unsigned char data[3] = { (u8)(reg >> 8), (u8)(reg & 0xff), val }; + struct i2c_msg msg = { + .addr = client->addr, + .flags = 0, + .len = 3, + .buf = data, + }; + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret < 0) { + dev_err(&client->dev, "Failed writing register 0x%02x!\n", reg); + return ret; + } + + return 0; +} + +/** + * Initialize a list of ov5650 registers. + * The list of registers is terminated by the pair of values + * @client: i2c driver client structure. + * @reglist[]: List of address of the registers to write data. + * Returns zero if successful, or non-zero otherwise. + */ +static int ov5650_reg_writes(struct i2c_client *client, + const struct ov5650_reg reglist[], + int size) +{ + int err = 0, i; + + for (i = 0; i < size; i++) { + err = ov5650_reg_write(client, reglist[i].reg, + reglist[i].val); + if (err) + return err; + } + return 0; +} + +static int ov5650_reg_set(struct i2c_client *client, u16 reg, u8 val) +{ + int ret; + u8 tmpval = 0; + + ret = ov5650_reg_read(client, reg, &tmpval); + if (ret) + return ret; + + return ov5650_reg_write(client, reg, tmpval | val); +} + +static int ov5650_reg_clr(struct i2c_client *client, u16 reg, u8 val) +{ + int ret; + u8 tmpval = 0; + + ret = ov5650_reg_read(client, reg, &tmpval); + if (ret) + return ret; + + return ov5650_reg_write(client, reg, tmpval & ~val); +} + +static int ov5650_config_timing(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov5650 *ov5650 = to_ov5650(sd); + int ret = 0, i; + + i = ov5650_find_framesize(ov5650->format.width, ov5650->format.height); + + ret = ov5650_reg_writes(client, timing_cfg[i], + ARRAY_SIZE(timing_cfg[i])); + return ret; +}; + +static struct v4l2_mbus_framefmt * +__ov5650_get_pad_format(struct ov5650 *ov5650, struct v4l2_subdev_fh *fh, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_format(fh, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &ov5650->format; + default: + return NULL; + } +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev internal operations + */ + +static int ov5650_s_power(struct v4l2_subdev *sd, int on) +{ + struct ov5650 *ov5650 = to_ov5650(sd); + + return ov5650->pdata->s_power(sd, on); +} + +static int ov5650_registered(struct v4l2_subdev *subdev) +{ + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct ov5650 *ov5650 = to_ov5650(subdev); + int ret = 0; + u8 chipid[2]; + + ret = ov5650_s_power(subdev, 1); + if (ret < 0) { + dev_err(&client->dev, "OV5650 power up failed\n"); + return ret; + } + + ret = ov5650_reg_read(client, 0x300A, &chipid[0]); + if (ret) { + dev_err(&client->dev, "Failure to read Chip ID (high byte)\n"); + goto out; + } + + ret = ov5650_reg_read(client, 0x300B, &chipid[1]); + if (ret) { + dev_err(&client->dev, "Failure to read Chip ID (low byte)\n"); + goto out; + } + + if ((chipid[0] != 0x56) || ((chipid[1] & 0x51) != chipid[1])) { + dev_err(&client->dev, "Chip ID: %x%x not supported!\n", + chipid[0], chipid[1]); + ret = -ENODEV; + goto out; + } + + dev_info(&client->dev, "Detected a OV%x%x chip, revision %s\n", + chipid[0], chipid[1], + (chipid[1] == 0x50) ? "1A": "1B/1C"); + + /* Init controls */ + ret = v4l2_ctrl_handler_init(&ov5650->ctrl_handler, 1); + if (ret) + goto out; + + ov5650->pixel_rate = v4l2_ctrl_new_std( + &ov5650->ctrl_handler, NULL, + V4L2_CID_PIXEL_RATE, + 0, 0, 1, 0); + + subdev->ctrl_handler = &ov5650->ctrl_handler; +out: + ov5650_s_power(subdev, 0); + + return ret; +} + +static int ov5650_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *format; + + format = v4l2_subdev_get_try_format(fh, 0); + format->code = V4L2_MBUS_FMT_SGRBG8_1X8; + format->width = ov5650_frmsizes[OV5650_SIZE_5MP].width; + format->height = ov5650_frmsizes[OV5650_SIZE_5MP].height; + format->field = V4L2_FIELD_NONE; + format->colorspace = V4L2_COLORSPACE_SRGB; + + return 0; +} + +static int ov5650_close(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) +{ + return 0; +} + +static int ov5650_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct ov5650 *ov5650 = to_ov5650(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret = 0; + + if (enable) { + /* SW Reset */ + ret = ov5650_reg_set(client, 0x3008, 0x80); + if (ret) + goto out; + + msleep(2); + + ret = ov5650_reg_clr(client, 0x3008, 0x80); + if (ret) + goto out; + + /* SW Powerdown */ + ret = ov5650_reg_set(client, 0x3008, 0x40); + if (ret) + goto out; + + ret = ov5650_reg_writes(client, configscript_common1, + ARRAY_SIZE(configscript_common1)); + if (ret) + goto out; + + ret = ov5650_config_timing(sd); + if (ret) + return ret; + + ret = ov5650_reg_writes(client, configscript_common2, + ARRAY_SIZE(configscript_common2)); + if (ret) + goto out; + + switch ((u32)ov5650->format.code) { + case V4L2_MBUS_FMT_SGRBG8_1X8: + ret = ov5650_reg_write(client, 0x300f, 0x8a); + if (ret) + return ret; + + ret = ov5650_reg_write(client, 0x3010, 0x10); + if (ret) + return ret; + + ret = ov5650_reg_write(client, 0x3011, 0x10); + if (ret) + return ret; + + ret = ov5650_reg_write(client, 0x3012, 0x02); + if (ret) + return ret; + + break; + case V4L2_MBUS_FMT_SGRBG10_1X10: + ret = ov5650_reg_write(client, 0x300f, 0x8b); + if (ret) + return ret; + + ret = ov5650_reg_write(client, 0x3010, 0x10); + if (ret) + return ret; + + ret = ov5650_reg_write(client, 0x3011, 0x14); + if (ret) + return ret; + + ret = ov5650_reg_write(client, 0x3012, 0x02); + if (ret) + return ret; + + break; + default: + /* This shouldn't happen */ + ret = -EINVAL; + return ret; + } + + ret = ov5650_reg_clr(client, 0x3008, 0x40); + if (ret) + goto out; + + } else { + ret = ov5650_reg_set(client, 0x3008, 0x40); + if (ret) + goto out; + } + +out: + return ret; +} + +static int ov5650_g_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *format) +{ + struct ov5650 *ov5650 = to_ov5650(sd); + + format->format = *__ov5650_get_pad_format(ov5650, fh, format->pad, + format->which); + + return 0; +} + +static int ov5650_s_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *format) +{ + struct ov5650 *ov5650 = to_ov5650(sd); + struct v4l2_mbus_framefmt *__format; + + __format = __ov5650_get_pad_format(ov5650, fh, format->pad, + format->which); + + *__format = format->format; + + /* NOTE: This is always true for now, revisit later. */ + /* For RAW10, pixelrate is 80% lower, since the same + * Mbps ratio is preserved, but more bits per pixel are + * transmitted. + */ + if (__format->code == V4L2_MBUS_FMT_SGRBG10_1X10) + ov5650->pixel_rate->cur.val64 = 96000000; + else if (__format->code == V4L2_MBUS_FMT_SGRBG8_1X8) + ov5650->pixel_rate->cur.val64 = 120000000; + + return 0; +} + +static struct v4l2_subdev_internal_ops ov5650_subdev_internal_ops = { + .registered = ov5650_registered, + .open = ov5650_open, + .close = ov5650_close, +}; + +static int ov5650_enum_fmt(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index >= 2) + return -EINVAL; + + switch (code->index) { + case 0: + code->code = V4L2_MBUS_FMT_SGRBG8_1X8; + break; + case 1: + code->code = V4L2_MBUS_FMT_SGRBG10_1X10; + break; + } + return 0; +} + +static int ov5650_enum_framesizes(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + if ((fse->index >= OV5650_SIZE_LAST) || + (fse->code != V4L2_MBUS_FMT_SGRBG8_1X8 && + fse->code != V4L2_MBUS_FMT_SGRBG10_1X10)) + return -EINVAL; + + fse->min_width = ov5650_frmsizes[fse->index].width; + fse->max_width = fse->min_width; + fse->min_height = ov5650_frmsizes[fse->index].height; + fse->max_height = fse->min_height; + + return 0; +} + +static int ov5650_g_skip_frames(struct v4l2_subdev *sd, u32 *frames) +{ + /* REVISIT */ + *frames = 3; + + return 0; +} + +static struct v4l2_subdev_core_ops ov5650_subdev_core_ops = { + .s_power = ov5650_s_power, +}; + +static struct v4l2_subdev_video_ops ov5650_subdev_video_ops = { + .s_stream = ov5650_s_stream, +}; + +static struct v4l2_subdev_pad_ops ov5650_subdev_pad_ops = { + .enum_mbus_code = ov5650_enum_fmt, + .enum_frame_size = ov5650_enum_framesizes, + .get_fmt = ov5650_g_fmt, + .set_fmt = ov5650_s_fmt, +}; + +static struct v4l2_subdev_sensor_ops ov5650_subdev_sensor_ops = { + .g_skip_frames = &ov5650_g_skip_frames, +}; + +static struct v4l2_subdev_ops ov5650_subdev_ops = { + .core = &ov5650_subdev_core_ops, + .video = &ov5650_subdev_video_ops, + .pad = &ov5650_subdev_pad_ops, + .sensor = &ov5650_subdev_sensor_ops, +}; + +static int ov5650_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct ov5650 *ov5650; + int ret; + + if (!client->dev.platform_data) { + dev_err(&client->dev, "No platform data!!\n"); + return -ENODEV; + } + + ov5650 = kzalloc(sizeof(*ov5650), GFP_KERNEL); + if (!ov5650) + return -ENOMEM; + + ov5650->pdata = client->dev.platform_data; + + ov5650->format.code = V4L2_MBUS_FMT_SGRBG8_1X8; + ov5650->format.width = ov5650_frmsizes[OV5650_SIZE_5MP].width; + ov5650->format.height = ov5650_frmsizes[OV5650_SIZE_5MP].height; + ov5650->format.field = V4L2_FIELD_NONE; + ov5650->format.colorspace = V4L2_COLORSPACE_SRGB; + + v4l2_i2c_subdev_init(&ov5650->subdev, client, &ov5650_subdev_ops); + ov5650->subdev.internal_ops = &ov5650_subdev_internal_ops; + ov5650->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + ov5650->subdev.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + + ov5650->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&ov5650->subdev.entity, 1, &ov5650->pad, 0); + + if (ret < 0) { + media_entity_cleanup(&ov5650->subdev.entity); + kfree(ov5650); + } + + return ret; +} + +static int ov5650_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct ov5650 *ov5650 = to_ov5650(subdev); + + v4l2_ctrl_handler_free(&ov5650->ctrl_handler); + v4l2_device_unregister_subdev(subdev); + media_entity_cleanup(&subdev->entity); + kfree(ov5650); + return 0; +} + +static const struct i2c_device_id ov5650_id[] = { + { "ov5650", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ov5650_id); + +static struct i2c_driver ov5650_i2c_driver = { + .driver = { + .name = "ov5650", + }, + .probe = ov5650_probe, + .remove = ov5650_remove, + .id_table = ov5650_id, +}; + +static int __init ov5650_mod_init(void) +{ + return i2c_add_driver(&ov5650_i2c_driver); +} + +static void __exit ov5650_mod_exit(void) +{ + i2c_del_driver(&ov5650_i2c_driver); +} + +module_init(ov5650_mod_init); +module_exit(ov5650_mod_exit); + +MODULE_DESCRIPTION("OmniVision OV5650 Camera driver"); +MODULE_AUTHOR("Sergio Aguirre <saaguirre@xxxxxx>"); +MODULE_LICENSE("GPL v2"); diff --git a/include/media/ov5650.h b/include/media/ov5650.h new file mode 100644 index 0000000..287f20f --- /dev/null +++ b/include/media/ov5650.h @@ -0,0 +1,10 @@ +#ifndef _MEDIA_OV5650_H +#define _MEDIA_OV5650_H + +#include <media/v4l2-subdev.h> + +struct ov5650_platform_data { + int (*s_power)(struct v4l2_subdev *subdev, int on); +}; + +#endif -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
