On 12-04-19 08:08 AM, Brian J. Murrell wrote: > I have an HVR-950Q: > > [44847.234403] tveeprom 0-0050: Hauppauge model 72001, rev B3F0, serial# ******* > [44847.294643] tveeprom 0-0050: MAC address is **:**:**:**:**:** > [44847.343417] tveeprom 0-0050: tuner model is Xceive XC5000 (idx 150, type 76) > [44847.402873] tveeprom 0-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88) > [44847.465471] tveeprom 0-0050: audio processor is AU8522 (idx 44) > [44847.515481] tveeprom 0-0050: decoder processor is AU8522 (idx 42) > [44847.567162] tveeprom 0-0050: has no radio, has IR receiver, has no IR transmitter > [44847.630272] hauppauge_eeprom: hauppauge eeprom: model=72001 > > I cannot seem to get it to work after removing the au0828 xc5000 au8522 > modules and then modprobing the au0828 module. To follow-up on this, it seems that if I remove and insert the au0828 enough times, it will be functional again. Race perhaps? It seems when it's inserted and doesn't work, the following is logged in the kernel message buffer: xc5000: Device not found at addr 0x61 (0xffff) and when it's inserted successfully: xc5000: Successfully identified at address 0x61 xc5000: Firmware has not been loaded previously It also seems that the module will become non-functional just as if I had removed and inserted it, all on it's own without any removal insertion. b.
Attachment:
signature.asc
Description: OpenPGP digital signature
