Em 15-04-2012 12:53, nibble.max escreveu: > dvbsky dvb-s2 pcie based on montage m88ds3103 demodulator. > > Signed-off-by: Max nibble <nibble.max@xxxxxxxxx> > --- > drivers/media/video/cx23885/Kconfig | 1 + > drivers/media/video/cx23885/cx23885-cards.c | 107 +++++++++++++++++++++++++++ > drivers/media/video/cx23885/cx23885-dvb.c | 52 +++++++++++++ > drivers/media/video/cx23885/cx23885-f300.c | 55 ++++++++++++++ > drivers/media/video/cx23885/cx23885-f300.h | 6 ++ > drivers/media/video/cx23885/cx23885-input.c | 15 ++++ > drivers/media/video/cx23885/cx23885.h | 3 + > 7 files changed, 239 insertions(+) > > diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig > index b391e9b..20337c7 100644 > --- a/drivers/media/video/cx23885/Kconfig > +++ b/drivers/media/video/cx23885/Kconfig > @@ -20,6 +20,7 @@ config VIDEO_CX23885 > select DVB_LNBP21 if !DVB_FE_CUSTOMISE > select DVB_STV6110 if !DVB_FE_CUSTOMISE > select DVB_CX24116 if !DVB_FE_CUSTOMISE > + select DVB_M88DS3103 if !DVB_FE_CUSTOMISE > select DVB_STV0900 if !DVB_FE_CUSTOMISE > select DVB_DS3000 if !DVB_FE_CUSTOMISE > select DVB_STV0367 if !DVB_FE_CUSTOMISE > diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c > index 19b5499..fdf9d0f 100644 > --- a/drivers/media/video/cx23885/cx23885-cards.c > +++ b/drivers/media/video/cx23885/cx23885-cards.c > @@ -497,6 +497,20 @@ struct cx23885_board cx23885_boards[] = { > .name = "TerraTec Cinergy T PCIe Dual", > .portb = CX23885_MPEG_DVB, > .portc = CX23885_MPEG_DVB, > + }, > + > + [CX23885_BOARD_BST_PS8512] = { > + .name = "Bestunar PS8512", > + .portb = CX23885_MPEG_DVB, > + }, > + [CX23885_BOARD_DVBSKY_S950] = { > + .name = "DVBSKY S950", > + .portb = CX23885_MPEG_DVB, > + }, > + [CX23885_BOARD_DVBSKY_S952] = { > + .name = "DVBSKY S952", > + .portb = CX23885_MPEG_DVB, > + .portc = CX23885_MPEG_DVB, > } > }; > const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); > @@ -705,6 +719,18 @@ struct cx23885_subid cx23885_subids[] = { > .subvendor = 0x153b, > .subdevice = 0x117e, > .card = CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL, > + }, { > + .subvendor = 0x14f1, > + .subdevice = 0x8512, > + .card = CX23885_BOARD_BST_PS8512, > + }, { > + .subvendor = 0x4254, > + .subdevice = 0x0950, > + .card = CX23885_BOARD_DVBSKY_S950, > + }, { > + .subvendor = 0x4254, > + .subdevice = 0x0952, > + .card = CX23885_BOARD_DVBSKY_S952, > }, > }; > const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); > @@ -1216,9 +1242,57 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) > /* enable irq */ > cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/ > break; > + case CX23885_BOARD_DVBSKY_S950: > + case CX23885_BOARD_BST_PS8512: > + cx23885_gpio_enable(dev, GPIO_2, 1); > + cx23885_gpio_clear(dev, GPIO_2); > + msleep(100); > + cx23885_gpio_set(dev, GPIO_2); > + break; > + case CX23885_BOARD_DVBSKY_S952: > + cx_write(MC417_CTL, 0x00000037);/* enable GPIO3-18 pins */ > + > + cx23885_gpio_enable(dev, GPIO_2, 1); > + cx23885_gpio_enable(dev, GPIO_11, 1); > + > + cx23885_gpio_clear(dev, GPIO_2); > + cx23885_gpio_clear(dev, GPIO_11); > + msleep(100); > + cx23885_gpio_set(dev, GPIO_2); > + cx23885_gpio_set(dev, GPIO_11); > + > + break; > } > } > > +static int cx23885_ir_patch(struct i2c_adapter *i2c, u8 reg, u8 mask) > +{ > + struct i2c_msg msgs[2]; > + u8 tx_buf[2], rx_buf[1]; > + /* Write register address */ > + tx_buf[0] = reg; > + msgs[0].addr = 0x4c; > + msgs[0].flags = 0; > + msgs[0].len = 1; > + msgs[0].buf = (char *) tx_buf; > + /* Read data from register */ > + msgs[1].addr = 0x4c; > + msgs[1].flags = I2C_M_RD; > + msgs[1].len = 1; > + msgs[1].buf = (char *) rx_buf; > + > + i2c_transfer(i2c, msgs, 2); > + > + tx_buf[0] = reg; > + tx_buf[1] = rx_buf[0] | mask; > + msgs[0].addr = 0x4c; > + msgs[0].flags = 0; > + msgs[0].len = 2; > + msgs[0].buf = (char *) tx_buf; > + > + return i2c_transfer(i2c, msgs, 1); > +} > + > int cx23885_ir_init(struct cx23885_dev *dev) > { > static struct v4l2_subdev_io_pin_config ir_rxtx_pin_cfg[] = { > @@ -1301,6 +1375,20 @@ int cx23885_ir_init(struct cx23885_dev *dev) > v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config, > ir_rx_pin_cfg_count, ir_rx_pin_cfg); > break; > + case CX23885_BOARD_BST_PS8512: > + case CX23885_BOARD_DVBSKY_S950: > + case CX23885_BOARD_DVBSKY_S952: > + dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE); > + if (dev->sd_ir == NULL) { > + ret = -ENODEV; > + break; > + } > + v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config, > + ir_rx_pin_cfg_count, ir_rx_pin_cfg); > + > + cx23885_ir_patch(&(dev->i2c_bus[2].i2c_adap),0x1f,0x80); > + cx23885_ir_patch(&(dev->i2c_bus[2].i2c_adap),0x23,0x80); > + break; > case CX23885_BOARD_HAUPPAUGE_HVR1250: > if (!enable_885_ir) > break; > @@ -1332,6 +1420,9 @@ void cx23885_ir_fini(struct cx23885_dev *dev) > break; > case CX23885_BOARD_TEVII_S470: > case CX23885_BOARD_HAUPPAUGE_HVR1250: > + case CX23885_BOARD_BST_PS8512: > + case CX23885_BOARD_DVBSKY_S950: > + case CX23885_BOARD_DVBSKY_S952: > cx23885_irq_remove(dev, PCI_MSK_AV_CORE); > /* sd_ir is a duplicate pointer to the AV Core, just clear it */ > dev->sd_ir = NULL; > @@ -1375,6 +1466,9 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev) > break; > case CX23885_BOARD_TEVII_S470: > case CX23885_BOARD_HAUPPAUGE_HVR1250: > + case CX23885_BOARD_BST_PS8512: > + case CX23885_BOARD_DVBSKY_S950: > + case CX23885_BOARD_DVBSKY_S952: > if (dev->sd_ir) > cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE); > break; > @@ -1459,6 +1553,8 @@ void cx23885_card_setup(struct cx23885_dev *dev) > ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ > ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; > break; > + case CX23885_BOARD_BST_PS8512: > + case CX23885_BOARD_DVBSKY_S950: > case CX23885_BOARD_TEVII_S470: > case CX23885_BOARD_DVBWORLD_2005: > ts1->gen_ctrl_val = 0x5; /* Parallel */ > @@ -1489,6 +1585,14 @@ void cx23885_card_setup(struct cx23885_dev *dev) > ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ > ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; > break; > + case CX23885_BOARD_DVBSKY_S952: > + ts1->gen_ctrl_val = 0x5; /* Parallel */ > + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ > + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; > + ts2->gen_ctrl_val = 0xe; /* Serial bus + punctured clock */ > + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ > + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; > + break; > case CX23885_BOARD_HAUPPAUGE_HVR1250: > case CX23885_BOARD_HAUPPAUGE_HVR1500: > case CX23885_BOARD_HAUPPAUGE_HVR1500Q: > @@ -1541,6 +1645,9 @@ void cx23885_card_setup(struct cx23885_dev *dev) > case CX23885_BOARD_MPX885: > case CX23885_BOARD_MYGICA_X8507: > case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: > + case CX23885_BOARD_BST_PS8512: > + case CX23885_BOARD_DVBSKY_S950: > + case CX23885_BOARD_DVBSKY_S952: > dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, > &dev->i2c_bus[2].i2c_adap, > "cx25840", 0x88 >> 1, NULL); > diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c > index 6835eb1..c5a3fa3 100644 > --- a/drivers/media/video/cx23885/cx23885-dvb.c > +++ b/drivers/media/video/cx23885/cx23885-dvb.c > @@ -51,6 +51,7 @@ > #include "stv6110.h" > #include "lnbh24.h" > #include "cx24116.h" > +#include "m88ds3103.h" > #include "cimax2.h" > #include "lgs8gxx.h" > #include "netup-eeprom.h" > @@ -489,6 +490,30 @@ static struct xc5000_config mygica_x8506_xc5000_config = { > .if_khz = 5380, > }; > > +/* bestunar single dvb-s2 */ > +static struct m88ds3103_config bst_ds3103_config = { > + .demod_address = 0x68, > + .ci_mode = 0, > + .pin_ctrl = 0x82, > + .ts_mode = 0, > + .set_voltage = bst_set_voltage, > +}; > +/* DVBSKY dual dvb-s2 */ > +static struct m88ds3103_config dvbsky_ds3103_config_pri = { > + .demod_address = 0x68, > + .ci_mode = 0, > + .pin_ctrl = 0x82, > + .ts_mode = 0, > + .set_voltage = bst_set_voltage, > +}; > +static struct m88ds3103_config dvbsky_ds3103_config_sec = { > + .demod_address = 0x68, > + .ci_mode = 0, > + .pin_ctrl = 0x82, > + .ts_mode = 1, > + .set_voltage = dvbsky_set_voltage_sec, > +}; > + > static int cx23885_dvb_set_frontend(struct dvb_frontend *fe) > { > struct dtv_frontend_properties *p = &fe->dtv_property_cache; > @@ -1173,6 +1198,33 @@ static int dvb_register(struct cx23885_tsport *port) > break; > } > break; > + > + case CX23885_BOARD_BST_PS8512: > + case CX23885_BOARD_DVBSKY_S950: > + i2c_bus = &dev->i2c_bus[1]; > + fe0->dvb.frontend = dvb_attach(m88ds3103_attach, > + &bst_ds3103_config, > + &i2c_bus->i2c_adap); > + break; > + > + case CX23885_BOARD_DVBSKY_S952: > + switch (port->nr) { > + /* port B */ > + case 1: > + i2c_bus = &dev->i2c_bus[1]; > + fe0->dvb.frontend = dvb_attach(m88ds3103_attach, > + &dvbsky_ds3103_config_pri, > + &i2c_bus->i2c_adap); > + break; > + /* port C */ > + case 2: > + i2c_bus = &dev->i2c_bus[0]; > + fe0->dvb.frontend = dvb_attach(m88ds3103_attach, > + &dvbsky_ds3103_config_sec, > + &i2c_bus->i2c_adap); > + break; > + } > + break; > default: > printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " > " isn't supported yet\n", > diff --git a/drivers/media/video/cx23885/cx23885-f300.c b/drivers/media/video/cx23885/cx23885-f300.c > index 93998f2..6be0369 100644 > --- a/drivers/media/video/cx23885/cx23885-f300.c > +++ b/drivers/media/video/cx23885/cx23885-f300.c > @@ -175,3 +175,58 @@ int f300_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) > > return f300_xfer(fe, buf); > } > + > +/* bst control */ > +int bst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) > +{ > + struct cx23885_tsport *port = fe->dvb->priv; > + struct cx23885_dev *dev = port->dev; > + > + cx23885_gpio_enable(dev, GPIO_1, 1); > + cx23885_gpio_enable(dev, GPIO_0, 1); > + > + switch (voltage) { > + case SEC_VOLTAGE_13: > + cx23885_gpio_set(dev, GPIO_1); > + cx23885_gpio_clear(dev, GPIO_0); > + break; > + case SEC_VOLTAGE_18: > + cx23885_gpio_set(dev, GPIO_1); > + cx23885_gpio_set(dev, GPIO_0); > + break; > + case SEC_VOLTAGE_OFF: > + cx23885_gpio_clear(dev, GPIO_1); > + cx23885_gpio_clear(dev, GPIO_0); > + break; > + } > + > + > + return 0; > +} > + > +int dvbsky_set_voltage_sec(struct dvb_frontend *fe, fe_sec_voltage_t voltage) > +{ > + struct cx23885_tsport *port = fe->dvb->priv; > + struct cx23885_dev *dev = port->dev; > + > + cx23885_gpio_enable(dev, GPIO_12, 1); > + cx23885_gpio_enable(dev, GPIO_13, 1); > + > + switch (voltage) { > + case SEC_VOLTAGE_13: > + cx23885_gpio_set(dev, GPIO_13); > + cx23885_gpio_clear(dev, GPIO_12); > + break; > + case SEC_VOLTAGE_18: > + cx23885_gpio_set(dev, GPIO_13); > + cx23885_gpio_set(dev, GPIO_12); > + break; > + case SEC_VOLTAGE_OFF: > + cx23885_gpio_clear(dev, GPIO_13); > + cx23885_gpio_clear(dev, GPIO_12); > + break; > + } > + > + > + return 0; > +} > \ No newline at end of file Please add a new line. > diff --git a/drivers/media/video/cx23885/cx23885-f300.h b/drivers/media/video/cx23885/cx23885-f300.h > index e73344c..cd02d02 100644 > --- a/drivers/media/video/cx23885/cx23885-f300.h > +++ b/drivers/media/video/cx23885/cx23885-f300.h > @@ -1,2 +1,8 @@ > +extern int dvbsky_set_voltage_sec(struct dvb_frontend *fe, > + fe_sec_voltage_t voltage); > + > +extern int bst_set_voltage(struct dvb_frontend *fe, > + fe_sec_voltage_t voltage); > + > extern int f300_set_voltage(struct dvb_frontend *fe, > fe_sec_voltage_t voltage); > diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c > index ce765e3..69c01f3 100644 > --- a/drivers/media/video/cx23885/cx23885-input.c > +++ b/drivers/media/video/cx23885/cx23885-input.c > @@ -87,6 +87,9 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events) > case CX23885_BOARD_HAUPPAUGE_HVR1290: > case CX23885_BOARD_TEVII_S470: > case CX23885_BOARD_HAUPPAUGE_HVR1250: > + case CX23885_BOARD_BST_PS8512: > + case CX23885_BOARD_DVBSKY_S950: > + case CX23885_BOARD_DVBSKY_S952: > /* > * The only boards we handle right now. However other boards > * using the CX2388x integrated IR controller should be similar > @@ -138,6 +141,9 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev) > case CX23885_BOARD_HAUPPAUGE_HVR1850: > case CX23885_BOARD_HAUPPAUGE_HVR1290: > case CX23885_BOARD_HAUPPAUGE_HVR1250: > + case CX23885_BOARD_BST_PS8512: > + case CX23885_BOARD_DVBSKY_S950: > + case CX23885_BOARD_DVBSKY_S952: > /* > * The IR controller on this board only returns pulse widths. > * Any other mode setting will fail to set up the device. > @@ -279,6 +285,15 @@ int cx23885_input_init(struct cx23885_dev *dev) > /* A guess at the remote */ > rc_map = RC_MAP_TEVII_NEC; > break; > + case CX23885_BOARD_BST_PS8512: > + case CX23885_BOARD_DVBSKY_S950: > + case CX23885_BOARD_DVBSKY_S952: > + /* Integrated CX2388[58] IR controller */ > + driver_type = RC_DRIVER_IR_RAW; > + allowed_protos = RC_TYPE_ALL; > + /* A guess at the remote */ > + rc_map = RC_MAP_DVBSKY; > + break; > default: > return -ENODEV; > } > diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h > index f020f05..2724148 100644 > --- a/drivers/media/video/cx23885/cx23885.h > +++ b/drivers/media/video/cx23885/cx23885.h > @@ -89,6 +89,9 @@ > #define CX23885_BOARD_MPX885 32 > #define CX23885_BOARD_MYGICA_X8507 33 > #define CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL 34 > +#define CX23885_BOARD_BST_PS8512 35 > +#define CX23885_BOARD_DVBSKY_S952 36 > +#define CX23885_BOARD_DVBSKY_S950 37 > > #define GPIO_0 0x00000001 > #define GPIO_1 0x00000002 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html