Video user controls such as brightness, contrast, saturation, and
hue are now handled.
Signed-off-by: Federico Vaga <federico.vaga@xxxxxxxxx>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@xxxxxx>
Cc: Alan Cox <alan@xxxxxxxxxxxxxxx>
---
drivers/media/video/adv7180.c | 417 ++++++++++++++++++++++++++++++++++-------
1 files changed, 350 insertions(+), 67 deletions(-)
diff --git a/drivers/media/video/adv7180.c b/drivers/media/video/adv7180.c
index b8b6c4b..174bffa 100644
--- a/drivers/media/video/adv7180.c
+++ b/drivers/media/video/adv7180.c
@@ -48,6 +48,7 @@
#define ADV7180_INPUT_CONTROL_PAL_COMB_N_PED 0xd0
#define ADV7180_INPUT_CONTROL_PAL_SECAM 0xe0
#define ADV7180_INPUT_CONTROL_PAL_SECAM_PED 0xf0
+#define ADV7180_INPUT_CONTROL_INSEL_MASK 0x0f
#define ADV7180_EXTENDED_OUTPUT_CONTROL_REG 0x04
#define ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS 0xC5
@@ -55,9 +56,29 @@
#define ADV7180_AUTODETECT_ENABLE_REG 0x07
#define ADV7180_AUTODETECT_DEFAULT 0x7f
+#define ADV7180_CON_REG 0x08 /*Unsigned */
+#define CON_REG_MIN 0
+#define CON_REG_DEF 128
+#define CON_REG_MAX 255
+
+#define ADV7180_BRI_REG 0x0a /*Signed */
+#define BRI_REG_MIN -128
+#define BRI_REG_DEF 0
+#define BRI_REG_MAX 127
+
+#define ADV7180_HUE_REG 0x0b /*Signed, inverted */
+#define HUE_REG_MIN -127
+#define HUE_REG_DEF 0
+#define HUE_REG_MAX 128
+
#define ADV7180_ADI_CTRL_REG 0x0e
#define ADV7180_ADI_CTRL_IRQ_SPACE 0x20
+#define ADV7180_PWR_MAN_REG 0x0f
+#define ADV7180_PWR_MAN_ON 0x04
+#define ADV7180_PWR_MAN_OFF 0x24
+#define ADV7180_PWR_MAN_RES 0x80
+
#define ADV7180_STATUS1_REG 0x10
#define ADV7180_STATUS1_IN_LOCK 0x01
#define ADV7180_STATUS1_AUTOD_MASK 0x70
@@ -78,6 +99,12 @@
#define ADV7180_ICONF1_PSYNC_ONLY 0x10
#define ADV7180_ICONF1_ACTIVE_TO_CLR 0xC0
+#define ADV7180_SD_SAT_CB_REG 0xe3 /*Unsigned */
+#define ADV7180_SD_SAT_CR_REG 0xe4 /*Unsigned */
+#define SAT_REG_MIN 0
+#define SAT_REG_DEF 128
+#define SAT_REG_MAX 255
+
#define ADV7180_IRQ1_LOCK 0x01
#define ADV7180_IRQ1_UNLOCK 0x02
#define ADV7180_ISR1_ADI 0x42
@@ -90,6 +117,9 @@
#define ADV7180_IMR3_ADI 0x4C
#define ADV7180_IMR4_ADI 0x50
+#define ADV7180_NTSC_V_BIT_END_REG 0xE6
+#define ADV7180_NTSC_V_BIT_END_MANUAL_NVEND 0x4F
+
struct adv7180_state {
struct v4l2_subdev sd;
struct work_struct work;
@@ -97,6 +127,11 @@ struct adv7180_state {
int irq;
v4l2_std_id curr_norm;
bool autodetect;
+ s8 brightness;
+ s16 hue;
+ u8 contrast;
+ u8 saturation;
+ u8 input;
};
static v4l2_std_id adv7180_std_to_v4l2(u8 status1)
@@ -155,7 +190,7 @@ static u32 adv7180_status_to_v4l2(u8 status1)
}
static int __adv7180_status(struct i2c_client *client, u32 *status,
- v4l2_std_id *std)
+ v4l2_std_id *std)
{
int status1 = i2c_smbus_read_byte_data(client, ADV7180_STATUS1_REG);
@@ -192,6 +227,36 @@ static int adv7180_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
return err;
}
+static int adv7180_s_routing(struct v4l2_subdev *sd, u32 input,
+ u32 output, u32 config)
+{
+ struct adv7180_state *state = to_state(sd);
+ int ret = mutex_lock_interruptible(&state->mutex);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (ret)
+ return ret;
+
+ /*We cannot discriminate between LQFP and 40-pin LFCSP, so accept
+ * all inputs and let the card driver take care of validation
+ */
+ if ((input & ADV7180_INPUT_CONTROL_INSEL_MASK) != input)
+ goto out;
+
+ ret = i2c_smbus_read_byte_data(client, ADV7180_INPUT_CONTROL_REG);
+
+ if (ret < 0)
+ goto out;
+
+ ret &= ~ADV7180_INPUT_CONTROL_INSEL_MASK;
+ ret = i2c_smbus_write_byte_data(client,
+ ADV7180_INPUT_CONTROL_REG, ret | input);
+ state->input = input;
+out:
+ mutex_unlock(&state->mutex);
+ return ret;
+}
+
static int adv7180_g_input_status(struct v4l2_subdev *sd, u32 *status)
{
struct adv7180_state *state = to_state(sd);
@@ -205,7 +270,7 @@ static int adv7180_g_input_status(struct v4l2_subdev *sd, u32 *status)
}
static int adv7180_g_chip_ident(struct v4l2_subdev *sd,
- struct v4l2_dbg_chip_ident *chip)
+ struct v4l2_dbg_chip_ident *chip)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -222,9 +287,10 @@ static int adv7180_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
/* all standards -> autodetect */
if (std == V4L2_STD_ALL) {
- ret = i2c_smbus_write_byte_data(client,
- ADV7180_INPUT_CONTROL_REG,
- ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM);
+ ret =
+ i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
+ ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM
+ | state->input);
if (ret < 0)
goto out;
@@ -236,7 +302,8 @@ static int adv7180_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
goto out;
ret = i2c_smbus_write_byte_data(client,
- ADV7180_INPUT_CONTROL_REG, ret);
+ ADV7180_INPUT_CONTROL_REG,
+ ret | state->input);
if (ret < 0)
goto out;
@@ -249,14 +316,138 @@ out:
return ret;
}
+static int adv7180_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
+{
+ switch (qc->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return v4l2_ctrl_query_fill(qc, BRI_REG_MIN, BRI_REG_MAX,
+ 1, BRI_REG_DEF);
+ case V4L2_CID_HUE:
+ return v4l2_ctrl_query_fill(qc, HUE_REG_MIN, HUE_REG_MAX,
+ 1, HUE_REG_DEF);
+ case V4L2_CID_CONTRAST:
+ return v4l2_ctrl_query_fill(qc, CON_REG_MIN, CON_REG_MAX,
+ 1, CON_REG_DEF);
+ case V4L2_CID_SATURATION:
+ return v4l2_ctrl_query_fill(qc, SAT_REG_MIN, SAT_REG_MAX,
+ 1, SAT_REG_DEF);
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static int adv7180_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ struct adv7180_state *state = to_state(sd);
+ int ret = mutex_lock_interruptible(&state->mutex);
+ if (ret)
+ return ret;
+
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ ctrl->value = state->brightness;
+ break;
+ case V4L2_CID_HUE:
+ ctrl->value = state->hue;
+ break;
+ case V4L2_CID_CONTRAST:
+ ctrl->value = state->contrast;
+ break;
+ case V4L2_CID_SATURATION:
+ ctrl->value = state->saturation;
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ mutex_unlock(&state->mutex);
+ return ret;
+}
+
+static int adv7180_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ struct adv7180_state *state = to_state(sd);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int ret = mutex_lock_interruptible(&state->mutex);
+ if (ret)
+ return ret;
+
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ if ((ctrl->value > BRI_REG_MAX)
+ || (ctrl->value < BRI_REG_MIN)) {
+ ret = -ERANGE;
+ break;
+ }
+ state->brightness = ctrl->value;
+ ret = i2c_smbus_write_byte_data(client,
+ ADV7180_BRI_REG,
+ state->brightness);
+ break;
+ case V4L2_CID_HUE:
+ if ((ctrl->value > HUE_REG_MAX)
+ || (ctrl->value < HUE_REG_MIN)) {
+ ret = -ERANGE;
+ break;
+ }
+ state->hue = ctrl->value;
+ /*Hue is inverted according to HSL chart */
+ ret = i2c_smbus_write_byte_data(client,
+ ADV7180_HUE_REG, -state->hue);
+ break;
+ case V4L2_CID_CONTRAST:
+ if ((ctrl->value > CON_REG_MAX)
+ || (ctrl->value < CON_REG_MIN)) {
+ ret = -ERANGE;
+ break;
+ }
+ state->contrast = ctrl->value;
+ ret = i2c_smbus_write_byte_data(client,
+ ADV7180_CON_REG,
+ state->contrast);
+ break;
+ case V4L2_CID_SATURATION:
+ if ((ctrl->value > SAT_REG_MAX)
+ || (ctrl->value < SAT_REG_MIN)) {
+ ret = -ERANGE;
+ break;
+ }
+ /*
+ *This could be V4L2_CID_BLUE_BALANCE/V4L2_CID_RED_BALANCE
+ *Let's not confuse the user, everybody understands saturation
+ */
+ state->saturation = ctrl->value;
+ ret = i2c_smbus_write_byte_data(client,
+ ADV7180_SD_SAT_CB_REG,
+ state->saturation);
+ if (ret < 0)
+ break;
+ ret = i2c_smbus_write_byte_data(client,
+ ADV7180_SD_SAT_CR_REG,
+ state->saturation);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ mutex_unlock(&state->mutex);
+ return ret;
+}
+
static const struct v4l2_subdev_video_ops adv7180_video_ops = {
.querystd = adv7180_querystd,
.g_input_status = adv7180_g_input_status,
+ .s_routing = adv7180_s_routing,
};
static const struct v4l2_subdev_core_ops adv7180_core_ops = {
.g_chip_ident = adv7180_g_chip_ident,
.s_std = adv7180_s_std,
+ .queryctrl = adv7180_queryctrl,
+ .g_ctrl = adv7180_g_ctrl,
+ .s_ctrl = adv7180_s_ctrl,
};
static const struct v4l2_subdev_ops adv7180_ops = {
@@ -267,13 +458,13 @@ static const struct v4l2_subdev_ops adv7180_ops = {
static void adv7180_work(struct work_struct *work)
{
struct adv7180_state *state = container_of(work, struct adv7180_state,
- work);
+ work);
struct i2c_client *client = v4l2_get_subdevdata(&state->sd);
u8 isr3;
mutex_lock(&state->mutex);
i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
- ADV7180_ADI_CTRL_IRQ_SPACE);
+ ADV7180_ADI_CTRL_IRQ_SPACE);
isr3 = i2c_smbus_read_byte_data(client, ADV7180_ISR3_ADI);
/* clear */
i2c_smbus_write_byte_data(client, ADV7180_ICR3_ADI, isr3);
@@ -297,56 +488,51 @@ static irqreturn_t adv7180_irq(int irq, void *devid)
return IRQ_HANDLED;
}
-/*
- * Generic i2c probe
- * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
- */
-
-static __devinit int adv7180_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int init_device(struct i2c_client *client, struct adv7180_state *state)
{
- struct adv7180_state *state;
- struct v4l2_subdev *sd;
int ret;
- /* Check if the adapter supports the needed features */
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return -EIO;
-
- v4l_info(client, "chip found @ 0x%02x (%s)\n",
- client->addr << 1, client->adapter->name);
-
- state = kzalloc(sizeof(struct adv7180_state), GFP_KERNEL);
- if (state == NULL) {
- ret = -ENOMEM;
- goto err;
- }
-
- state->irq = client->irq;
- INIT_WORK(&state->work, adv7180_work);
- mutex_init(&state->mutex);
- state->autodetect = true;
- sd = &state->sd;
- v4l2_i2c_subdev_init(sd, client, &adv7180_ops);
-
/* Initialize adv7180 */
/* Enable autodetection */
- ret = i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
- ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM);
- if (ret < 0)
- goto err_unreg_subdev;
+ if (state->autodetect) {
+ ret =
+ i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
+ ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM
+ | state->input);
+ if (ret < 0)
+ return ret;
- ret = i2c_smbus_write_byte_data(client, ADV7180_AUTODETECT_ENABLE_REG,
- ADV7180_AUTODETECT_DEFAULT);
- if (ret < 0)
- goto err_unreg_subdev;
+ ret =
+ i2c_smbus_write_byte_data(client,
+ ADV7180_AUTODETECT_ENABLE_REG,
+ ADV7180_AUTODETECT_DEFAULT);
+ if (ret < 0)
+ return ret;
+ } else {
+ ret = v4l2_std_to_adv7180(state->curr_norm);
+ if (ret < 0)
+ return ret;
+ ret =
+ i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
+ ret | state->input);
+ if (ret < 0)
+ return ret;
+
+ }
/* ITU-R BT.656-4 compatible */
ret = i2c_smbus_write_byte_data(client,
- ADV7180_EXTENDED_OUTPUT_CONTROL_REG,
- ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS);
+ ADV7180_EXTENDED_OUTPUT_CONTROL_REG,
+ ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS);
if (ret < 0)
- goto err_unreg_subdev;
+ return ret;
+
+ /* Manually set V bit end position in NTSC mode */
+ ret = i2c_smbus_write_byte_data(client,
+ ADV7180_NTSC_V_BIT_END_REG,
+ ADV7180_NTSC_V_BIT_END_MANUAL_NVEND);
+ if (ret < 0)
+ return ret;
/* read current norm */
__adv7180_status(client, NULL, &state->curr_norm);
@@ -354,45 +540,109 @@ static __devinit int adv7180_probe(struct i2c_client *client,
/* register for interrupts */
if (state->irq > 0) {
ret = request_irq(state->irq, adv7180_irq, 0, DRIVER_NAME,
- state);
+ state);
if (ret)
- goto err_unreg_subdev;
+ return ret;
ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
- ADV7180_ADI_CTRL_IRQ_SPACE);
+ ADV7180_ADI_CTRL_IRQ_SPACE);
if (ret < 0)
- goto err_unreg_subdev;
+ return ret;
/* config the Interrupt pin to be active low */
ret = i2c_smbus_write_byte_data(client, ADV7180_ICONF1_ADI,
- ADV7180_ICONF1_ACTIVE_LOW | ADV7180_ICONF1_PSYNC_ONLY);
+ ADV7180_ICONF1_ACTIVE_LOW |
+ ADV7180_ICONF1_PSYNC_ONLY);
if (ret < 0)
- goto err_unreg_subdev;
+ return ret;
ret = i2c_smbus_write_byte_data(client, ADV7180_IMR1_ADI, 0);
if (ret < 0)
- goto err_unreg_subdev;
+ return ret;
ret = i2c_smbus_write_byte_data(client, ADV7180_IMR2_ADI, 0);
if (ret < 0)
- goto err_unreg_subdev;
+ return ret;
/* enable AD change interrupts interrupts */
ret = i2c_smbus_write_byte_data(client, ADV7180_IMR3_ADI,
- ADV7180_IRQ3_AD_CHANGE);
+ ADV7180_IRQ3_AD_CHANGE);
if (ret < 0)
- goto err_unreg_subdev;
+ return ret;
ret = i2c_smbus_write_byte_data(client, ADV7180_IMR4_ADI, 0);
if (ret < 0)
- goto err_unreg_subdev;
+ return ret;
ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
- 0);
+ 0);
if (ret < 0)
- goto err_unreg_subdev;
+ return ret;
}
+ /*Set default value for controls */
+ ret = i2c_smbus_write_byte_data(client, ADV7180_BRI_REG,
+ state->brightness);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG, state->hue);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte_data(client, ADV7180_CON_REG,
+ state->contrast);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CB_REG,
+ state->saturation);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CR_REG,
+ state->saturation);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static __devinit int adv7180_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adv7180_state *state;
+ struct v4l2_subdev *sd;
+ int ret;
+
+ /* Check if the adapter supports the needed features */
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -EIO;
+
+ v4l_info(client, "chip found @ 0x%02x (%s)\n",
+ client->addr, client->adapter->name);
+
+ state = kzalloc(sizeof(struct adv7180_state), GFP_KERNEL);
+ if (state == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ state->irq = client->irq;
+ INIT_WORK(&state->work, adv7180_work);
+ mutex_init(&state->mutex);
+ state->autodetect = true;
+ state->brightness = BRI_REG_DEF;
+ state->hue = HUE_REG_DEF;
+ state->contrast = CON_REG_DEF;
+ state->saturation = SAT_REG_DEF;
+ state->input = 0;
+ sd = &state->sd;
+ v4l2_i2c_subdev_init(sd, client, &adv7180_ops);
+
+ ret = init_device(client, state);
+ if (0 != ret)
+ goto err_unreg_subdev;
return 0;
err_unreg_subdev:
@@ -432,16 +682,49 @@ static const struct i2c_device_id adv7180_id[] = {
{},
};
+#ifdef CONFIG_PM
+static int adv7180_suspend(struct i2c_client *client, pm_message_t state)
+{
+ int ret;
+
+ ret = i2c_smbus_write_byte_data(client, ADV7180_PWR_MAN_REG,
+ ADV7180_PWR_MAN_OFF);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+static int adv7180_resume(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct adv7180_state *state = to_state(sd);
+ int ret;
+
+ ret = i2c_smbus_write_byte_data(client, ADV7180_PWR_MAN_REG,
+ ADV7180_PWR_MAN_ON);
+ if (ret < 0)
+ return ret;
+ ret = init_device(client, state);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+#endif
+
MODULE_DEVICE_TABLE(i2c, adv7180_id);
static struct i2c_driver adv7180_driver = {
.driver = {
- .owner = THIS_MODULE,
- .name = DRIVER_NAME,
- },
- .probe = adv7180_probe,
- .remove = __devexit_p(adv7180_remove),
- .id_table = adv7180_id,
+ .owner = THIS_MODULE,
+ .name = DRIVER_NAME,
+ },
+ .probe = adv7180_probe,
+ .remove = __devexit_p(adv7180_remove),
+#ifdef CONFIG_PM
+ .suspend = adv7180_suspend,
+ .resume = adv7180_resume,
+#endif
+ .id_table = adv7180_id,
};
module_i2c_driver(adv7180_driver);
--
1.7.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
