Implement the get_frontend function.
The code is derived from the old af9033 driver by Antti Palosaari.
Signed-off-by: Gianluca Gennari <gennarone@xxxxxxxxx>
---
drivers/media/dvb/frontends/af9033.c | 133 ++++++++++++++++++++++++++++++++++
1 files changed, 133 insertions(+), 0 deletions(-)
diff --git a/drivers/media/dvb/frontends/af9033.c b/drivers/media/dvb/frontends/af9033.c
index 5fadee7..da91155 100644
--- a/drivers/media/dvb/frontends/af9033.c
+++ b/drivers/media/dvb/frontends/af9033.c
@@ -26,6 +26,7 @@ struct af9033_state {
struct dvb_frontend fe;
struct af9033_config cfg;
+ u32 frequency;
u32 bandwidth_hz;
bool ts_mode_parallel;
bool ts_mode_serial;
@@ -406,6 +407,8 @@ static int af9033_set_frontend(struct dvb_frontend *fe)
pr_debug("%s: frequency=%d bandwidth_hz=%d\n", __func__, c->frequency,
c->bandwidth_hz);
+ state->frequency = c->frequency;
+
/* check bandwidth */
switch (c->bandwidth_hz) {
case 6000000:
@@ -523,6 +526,135 @@ err:
return ret;
}
+static int af9033_get_frontend(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct af9033_state *state = fe->demodulator_priv;
+ int ret;
+ u8 buf[8];
+
+ pr_debug("%s\n", __func__);
+
+ /* read all needed registers */
+ ret = af9033_rd_regs(state, 0x80f900, buf, sizeof(buf));
+ if (ret)
+ goto error;
+
+ switch ((buf[0] >> 0) & 3) {
+ case 0:
+ p->transmission_mode = TRANSMISSION_MODE_2K;
+ break;
+ case 1:
+ p->transmission_mode = TRANSMISSION_MODE_8K;
+ break;
+ }
+
+ switch ((buf[1] >> 0) & 3) {
+ case 0:
+ p->guard_interval = GUARD_INTERVAL_1_32;
+ break;
+ case 1:
+ p->guard_interval = GUARD_INTERVAL_1_16;
+ break;
+ case 2:
+ p->guard_interval = GUARD_INTERVAL_1_8;
+ break;
+ case 3:
+ p->guard_interval = GUARD_INTERVAL_1_4;
+ break;
+ }
+
+ switch ((buf[2] >> 0) & 7) {
+ case 0:
+ p->hierarchy = HIERARCHY_NONE;
+ break;
+ case 1:
+ p->hierarchy = HIERARCHY_1;
+ break;
+ case 2:
+ p->hierarchy = HIERARCHY_2;
+ break;
+ case 3:
+ p->hierarchy = HIERARCHY_4;
+ break;
+ }
+
+ switch ((buf[3] >> 0) & 3) {
+ case 0:
+ p->modulation = QPSK;
+ break;
+ case 1:
+ p->modulation = QAM_16;
+ break;
+ case 2:
+ p->modulation = QAM_64;
+ break;
+ }
+
+ switch ((buf[4] >> 0) & 3) {
+ case 0:
+ p->bandwidth_hz = 6000000;
+ break;
+ case 1:
+ p->bandwidth_hz = 7000000;
+ break;
+ case 2:
+ p->bandwidth_hz = 8000000;
+ break;
+ }
+
+ switch ((buf[6] >> 0) & 7) {
+ case 0:
+ p->code_rate_HP = FEC_1_2;
+ break;
+ case 1:
+ p->code_rate_HP = FEC_2_3;
+ break;
+ case 2:
+ p->code_rate_HP = FEC_3_4;
+ break;
+ case 3:
+ p->code_rate_HP = FEC_5_6;
+ break;
+ case 4:
+ p->code_rate_HP = FEC_7_8;
+ break;
+ case 5:
+ p->code_rate_HP = FEC_NONE;
+ break;
+ }
+
+ switch ((buf[7] >> 0) & 7) {
+ case 0:
+ p->code_rate_LP = FEC_1_2;
+ break;
+ case 1:
+ p->code_rate_LP = FEC_2_3;
+ break;
+ case 2:
+ p->code_rate_LP = FEC_3_4;
+ break;
+ case 3:
+ p->code_rate_LP = FEC_5_6;
+ break;
+ case 4:
+ p->code_rate_LP = FEC_7_8;
+ break;
+ case 5:
+ p->code_rate_LP = FEC_NONE;
+ break;
+ }
+
+ p->inversion = INVERSION_AUTO;
+ p->frequency = state->frequency;
+
+error:
+ if (ret)
+ pr_debug("%s: failed:%d\n", __func__, ret);
+
+ return ret;
+}
+
static int af9033_read_status(struct dvb_frontend *fe, fe_status_t *status)
{
struct af9033_state *state = fe->demodulator_priv;
@@ -776,6 +908,7 @@ static struct dvb_frontend_ops af9033_ops = {
.get_tune_settings = af9033_get_tune_settings,
.set_frontend = af9033_set_frontend,
+ .get_frontend = af9033_get_frontend,
.read_status = af9033_read_status,
.read_snr = af9033_read_snr,
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
