Hi, I'm trying to get my Terratec Cinergy HTC Stick to cooperate with Linux 3.3. It is going to be detected correctly, the requested firmware file dvb-usb-terratec-h5-drxk.fw is the one avaiable on [1]. At the moment, I only can test DVB-C. Which seems to work, from time to time. I can tune to some channels, the most channels are not working. When hitting a non working one, I get something like "drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params", as could be seen in the dmesg output. The device seems to be ok, at least with the Windows driver. How can I debug this? Thanks. Steve. [1] http://www.linuxtv.org/downloads/firmware/#7 == dmesg output == [ 82.768242] usb 1-6: new high-speed USB device number 3 using ehci_hcd [ 82.902484] usb 1-6: New USB device found, idVendor=0ccd, idProduct=00b2 [ 82.902502] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 82.902515] usb 1-6: Product: Cinergy_HTC_Stick [ 82.902525] usb 1-6: Manufacturer: TERRATEC [ 82.902535] usb 1-6: SerialNumber: 02?TERRATE [ 83.159089] IR NEC protocol handler initialized [ 83.165677] IR RC5(x) protocol handler initialized [ 83.181250] IR RC6 protocol handler initialized [ 83.199170] em28xx: New device TERRATEC Cinergy_HTC_Stick @ 480 Mbps (0ccd:00b2, interface 0, class 0) [ 83.199182] em28xx: Audio Vendor Class interface 0 found [ 83.199188] em28xx: Video interface 0 found [ 83.199193] em28xx: DVB interface 0 found [ 83.199736] em28xx #0: chip ID is em2884 [ 83.201072] IR JVC protocol handler initialized [ 83.206244] IR Sony protocol handler initialized [ 83.214044] IR SANYO protocol handler initialized [ 83.219177] IR MCE Keyboard/mouse protocol handler initialized [ 83.225775] lirc_dev: IR Remote Control driver registered, major 251 [ 83.228931] IR LIRC bridge handler initialized [ 83.257485] em28xx #0: Identified as Terratec Cinergy HTC Stick (card=82) [ 83.267576] i2c-core: driver [tuner] using legacy suspend method [ 83.267586] i2c-core: driver [tuner] using legacy resume method [ 83.308536] Chip ID is not zero. It is not a TEA5767 [ 83.308568] tuner 14-0060: Tuner -1 found with type(s) Radio TV. [ 83.308591] tuner 14-0060: tuner type not set [ 83.308767] em28xx #0: Config register raw data: 0xbd [ 83.308777] em28xx #0: I2S Audio (5 sample rates) [ 83.308786] em28xx #0: No AC97 audio processor [ 83.336125] em28xx #0: v4l2 driver version 0.1.3 [ 83.336150] tuner 14-0060: tuner type not set [ 83.366997] em28xx #0: V4L2 video device registered as video1 [ 83.367148] usbcore: registered new interface driver em28xx [ 83.387234] em28xx-audio.c: probing for em28xx Audio Vendor Class [ 83.387244] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 83.387251] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab [ 83.389287] Em28xx: Initialized (Em28xx Audio Extension) extension [ 84.203927] drxk: status = 0x639260d9 [ 84.203948] drxk: detected a drx-3926k, spin A3, xtal 20.250 MHz [ 85.526425] DRXK driver version 0.9.4300 [ 85.540783] drxk: frontend initialized. [ 87.293767] DVB: registering new adapter (em28xx #0) [ 87.293788] DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)... [ 87.298706] em28xx #0: Successfully loaded em28xx-dvb [ 87.298737] Em28xx: Initialized (Em28xx dvb Extension) extension [ 223.421599] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params: [ 223.421622] drxk: 02 00 00 00 10 00 05 00 03 02 .......... [ 237.329309] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params: [ 237.329331] drxk: 02 00 00 00 10 00 05 00 03 02 .......... [ 299.973528] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params: [ 299.973550] drxk: 02 00 00 00 10 00 05 00 03 02 .......... [ 428.985300] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params: [ 428.985316] drxk: 02 00 00 00 10 00 05 00 03 02 .......... [ 485.533707] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params: [ 485.533730] drxk: 02 00 00 00 10 00 05 00 03 02 .......... [ 496.741663] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params: [ 496.741686] drxk: 02 00 00 00 10 00 05 00 03 02 .......... [ 639.765595] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params: [ 639.765622] drxk: 02 00 00 00 10 00 05 00 03 02 .......... -- NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone! Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
