Il 03/04/2012 00:40, Antti Palosaari ha scritto: > On 03.04.2012 00:25, Gianluca Gennari wrote: >> This is necessary to tune VHF channels with the AVerMedia A835 stick. >> >> Signed-off-by: Gianluca Gennari<gennarone@xxxxxxxxx> >> --- >> drivers/media/common/tuners/tda18218.c | 2 +- >> 1 files changed, 1 insertions(+), 1 deletions(-) >> >> diff --git a/drivers/media/common/tuners/tda18218.c >> b/drivers/media/common/tuners/tda18218.c >> index dfb3a83..b079696 100644 >> --- a/drivers/media/common/tuners/tda18218.c >> +++ b/drivers/media/common/tuners/tda18218.c >> @@ -144,7 +144,7 @@ static int tda18218_set_params(struct dvb_frontend >> *fe) >> priv->if_frequency = 3000000; >> } else if (bw<= 7000000) { >> LP_Fc = 1; >> - priv->if_frequency = 3500000; >> + priv->if_frequency = 4000000; >> } else { >> LP_Fc = 2; >> priv->if_frequency = 4000000; > > Kwaak, I will not apply that until I have done background checking. That > driver is used only by AF9015 currently. And I did that driver as > reverse-engineering and thus there is some things guessed. I have only 8 > MHz wide signal, thus I never tested 7 and 6 MHz. Have no DVB-T > modulator either... Maybe some AF9015 user can confirm? Is there any > AF9015 & TDA18218 bug reports seen in discussion forums... A friend has a AF9015+TDA18218 stick and told me that it works fine with the patch (including VHF), but to be safe I will ask him to double check with the current media_build tree, with and without the patch. In the worst case, we can add a new parameter (or an array of parameters) for the IF frequency to struct tda18218_config. Regards, Gianluca -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html